• 한국표면공학회지
• /
• 제42권1호
• /
• pp.53-57
• /
• 2009

Recovery of heavy-metallic component from a waste solution of factory was undertaken by the solar cell electricity. The solution was obtained from an electrolytic etching process of 316L stainless steel. The electrolysis of the solution for recovery of heavy metallic components was made with platinum plated titanium mesh anode and copper plate cathode. Analysis for the solution and electro-winned materials were made by EDS, XRD and SEM. Iron, chromium, and sulfur components were recovered on the cathode from the solution. Result of EDS analysis for the electro-winned materials revealed that some metal oxide were contained in the recovered material. The recovered materials were expected to have metallic form only by the electrolysis, but metal compounds were contained because of weak solar cell power. Nickel and manganese component in the solution doesn't recovered by this electrolysis process, but they made a sludge with phosphoric acid in the solution.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.262-269
• /
• 2003

Nano-sized Ni-ferrite powder was fabricated by spray pyrolysis process using the waste solution resulting from shadow mask processing. The average particle size of the powder was below 100 nm. The effects of the concentration of raw material solution, the nozzle tip size and air pressure on the properties of powder were studied. As the concentration increased, the average particle size of the powder gradually increased and its specific surface area decreased, but size distribution was much wider and the fraction of the Ni-ferrite phase greatly increased as the concentration increasing. As the nozzle tip size increased from 1 mm to 2 mm, the average particle size of the powder decreased. In case of 3 mm nozzle tip size, the average particle size of the powder increased slightly. On the other hand, in case of 5 mm nozzle tip size, average particle size of the powder decreased. Size distribution of the powder was unhomogeneous, and the fraction of the Ni-ferrite phase decreased as the nozzle tip size increasing. As air pressure increased up to 1 kg/$cm^2$, the average particle size of the powder decreased slightly, on the other hand, the fraction of the Ni-ferrite phase was almost constant. In case of 3kg/$cm^2$ air pressure, average particle size of the powder and the fraction of the Ni-ferrite phase remarkably decreased, but size distribution was narrow.

• Environmental Engineering Research
• /
• 제11권1호
• /
• pp.14-27
• /
• 2006

The proper management of discarded electronic devices (often called electronic-waste) is an emerging issue for solid waste professionals throughout the world because of the large growth of the waste stream, and the content of toxic metals in them, most notably heavy metals such as lead. Notebook computers are becoming one of the major components of discarded computer devices and will continue to increase in the waste stream in the future. While the computers hold great promise for recycling, a substantial amount of this waste is often disposed in municipal solid waste (MSW) landfills. The toxicity characteristic leaching procedure (TCLP) is commonly used to simulate worse case leaching conditions where a potentially hazardous waste is assumed to be disposed along with municipal solid waste in a landfill with actively decomposing materials overlying an aquifer. The objective of this study was to examine leaching potential of lead from discarded notebook computers using the scale-up TCLP, other standard leaching tests such as California waste extraction test (Cal WET), and the synthetic precipitation leaching procedure (SPLP) and actual landfill leachates as leaching solution. The scale-up TCLP is a modified TCLP (where the device was disassembled and leached in or near entirety) to meet the intent of the TCLP. The results showed that the scale-up TCLP resulted in relatively high lead found in the leachate with an average of 23.3 mg/L. The average level was less than those by the standard TCLP and WET (37.0 mg/L and 86.0 mg/L, respectively), but much greater than those by the SPLP and the extractions with the landfill leachates (0.55 mg/L and 1.47 mg/L, respectively). The pH of the leaching solution and the ability of the organic acids in the TCLP and WET to complex with the lead were identified as major factors that controlled the amount of lead leached from notebook computers. Based on the results obtained by a number of leaching tests in this study, notebook computers may present a potential leaching risk to the environment and human health upon land disposal. However, further investigation is still needed to assess the true risk posed by the land disposal of discarded notebook computers.

• 자원리싸이클링
• /
• 제14권4호
• /
• pp.41-46
• /
• 2005

알루미늄 폐드로스는 알루미늄 용해 시에 발생되는 주요 폐기물로서 주요 성분은 알루미늄이며 또한 상당량의 금속 알루미늄이 잔류한다. 본 연구에서는 국내 재생 알루미늄업체에서 발생된 알루미늄 폐드로스를 수산화나트륨 용액으로 침출하여 폐드로스 중의 잔류 알루미늄을 용액 상으로 침출, 분리시키고, 침출용액 중에서 알루미늄 성분을 수산화알루미늄으로 회수하였으며 침출 여과 시에 발생된 폐드로스 잔사는 수세, 건조, 배소 과정을 거쳐 알루미나질 세라믹 원료로 재활용하였다. 또한, 1일 4톤의 알루미늄 폐드로스를 처리할 수 있는 규모의 파일롯트 플랜트를 건설하였으며, 시운전을 통하여 개발기술의 재현성을 확인함으로써 연구결과의 상용화 가능성을 제시하였다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.204-205
• /
• 2018

• 유기물자원화
• /
• 제8권1호
• /
• pp.83-89
• /
• 2000

There is no simple method to solve livestock waste problems satisfactorily. For a successful solution, various methods should be well organized orderly depending upon the situation. Even in the livestock waste management, integrated waste management principle should be applied. Minimization of livestock waste generation is the first priority. It is also important to distribute fairly livestock farms throughout the nation. Efficient management of permit system is equally important. Permit should be given only when the farmer have enough grass-land on which the farmer can apply more than two thirds of livestock waste generated or when the farm have an anaerobic digestor in which store livestock waste generated for at least 3 months. In principle, livestock waste should be treated in the farm and it is desirable to operate composting facilities in the farm site too.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.51-52
• /
• 2006

This study was progressed on the freezing behavior of waste water in relation to freeze concentration method useful to waste water treatment system of small and middle size and which can re-use purified water. The object of this experiment is comparing a pollutant contain of the frozen layer and of an aqueous solution by cooling wall temperature, a flow field effect and a initial thickness of frozen layer.

• 한국안전학회지
• /
• 제5권3호
• /
• pp.39-43
• /
• 1990

The transport of phenol from waste water through the liquid surfactant membrane containing Aliquat 336 as a carrier was analyzed by a theoretical model. Extraction experiments was carried out to investigate the effect of process parameters, such as mixing intensity, concentration of sodium hydroxide in internal aqueous solution, and counter anions, and initial phenol concentration in waste water at $25^{\circ}C$. It was found that transport rate of phenol increased with increasing pH differents. The transport rate of phenol in waste water was influenced by counter anions.

• 한국잠사곤충학회지
• /
• 제41권3호
• /
• pp.201-204
• /
• 1999

The silk/paper mulberry paper was prepared by recycling of the hard twisted silk waste and its mechanical properties was investigated. The silk waste was pretreated with sodium hydroxide(0.5%) and sodium carbonate(4%) to make it easy for beating and fibrillation. The silk/paper mulberry hand sheet paper has better mechanical properties of tearing strength and air permeability compared with the traditional and modified traditional paper. Treating with alkaline solution, the hard twisted silk waste could be used for an novel composite material.

• 자원리싸이클링
• /
• 제24권3호
• /
• pp.51-58
• /
• 2015

주석도금폐액으로부터 이온교환수지를 사용하여 주석 회수에 대한 연구를 실시하였다. 3종류의 이온교환수지를 사용하여 기초 실험한 결과 tertiary 기능기를 가진 이온교환수지(Lewatit TP 272)는 주석을 흡착하지 못하였고, iminodiacetic기능기를 가진 이온교환수지(Lewatit TP 207)는 주석의 흡착율은 높으나, 회수된 주석용액 내 불순물 함량이 높았다. Ethylhexyl-phosphate의 기능기를 가진 이온교환수지(Lewatit VP OC1026)를 사용한 경우, 주석의 흡착율이 iminodiacetic기능기를 가진 이온교환수지 보다 낮았으나 pH 조절에 따라 회수된 주석용액 내 불순물의 제거가 가능하였다. 또한 이온교환수지에 흡착된 유기물의 경우는 수세를 통해 제거를 함으로써 고순도 주석용액으로 회수가 가능하였다.