• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.217-222
• /
• 2003

This study was carried out to investigate the geotechnical characteristics and field application of soil mixed with waste lime. Waste lime used in this study is producted as a by-product in the manufacturing process of making Na$_2$CO$_3$from local chemical factory in Incheon. Currently about 320 milton tons of waste lime are accumulated and annually 100,000 tons are producted. In this study, feasible use of waste lime mixed with granited whathered soil, clay, crushed rock was invesigated through laboratory tests including specific gravity test, sieve analysis, hydrometer analysis, compaction test, CBR test. Field investigations were conducted on the road construction site in Incheon.

• 에너지공학
• /
• 제26권1호
• /
• pp.62-67
• /
• 2017

Limestone is an important commodity in Philippines. Limestone has numerous uses that range from agricultural applications to building materials to medicines. Many limestone products require rock with specific physical and chemical characteristics. Most limestone is biochemical in origin meaning the calcium carbonate in the stone originated from shelled oceanic creatures. In this paper, we reported the natural sources of limestone, geological formation of limestone and the oyster shell waste in Cebu, Bantayan, Philippines were reported. Due to the mining or quarrying in Cebu, Bantayan, in a limestone area poses the threat of groundwater pollution (since limestone is a porous geologic formation with a high transmissivity). The other environmental issue is oyster shell waste. The oyster shell waste is the major source of limestone. We developed and applied appropriate technologies for the extraction of limestone from oyster shell waste and utilizes as high value added material.

• 터널과지하공간
• /
• 제9권2호
• /
• pp.102-113
• /
• 1999

결정질 암반에 설치되는 처분공과 처분터널의 구조적 안정성을 평가하기 위해 UDEC과 3DEC을 이용하여 2차원해석과 3차원 해석의 결과를 비교 분석함으로써 불연속면의 존재, 처분공 사이의 간격 등이 처분터널과 처분공의 안정성에 미치는 영향을 파악하고자 하였다. 2차원 및 3차원 불연속 해석모델에서 최대주응력 및 파괴발생 가능성이 큰 지점은 터널과 불연속면 사이의 암반이다. 또한 처분공을 포함하는 해석단면에 대한 2차원 및 3차원 해석결과, 합리적인 결과를 얻기 위해서는 3차원 해석이 필요함을 제시할 수 있었다. 그리고 처분공 간격이 8m에서 3m로 감소하더라도 처분터널의 역학적인 안정성에는 큰 변화가 발생하지 않는 것으로 나타났다

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.575-587
• /
• 2024

The contact pressure between the surrounding rock and the support is an important indicator of the surrounding rock pressure. There has been a bottleneck in the prediction of contact loads between surrounding rock and primary support in deep-buried mountain tunnels. The main reason is that a reliable method wasn't existed to quantify the contact loads. This study had been taken into account the flexible support role of the primary support, and the fitting curve of surrounding rock deformation for dynamic tunnel construction was proposed. New formulas for the calculation of contact loads between surrounding rock and primary support were obtained by inversion. Comparative analysis of the calculation results with numerical simulation verified the reliability of the calculation method in this study. It can be seen from the analyses that the contact load between surrounding rock and primary support increases, remains unchanged and decreases during acceleration, uniform velocity and deceleration, respectively, and the deformation of the surrounding rock in the acceleration and deceleration stages cannot completely converted into contact loads. The contact loads between surrounding rock and primary support of medium-strength and weak surrounding rock tunnels are generally within 150 kPa and 1 MPa, respectively. For tunnels with weak surrounding rock, advanced support can be installed to reduce the unique release coefficient λ₀ and the value of the constant D, with the purpose of reducing the contact loads between surrounding rock and primary support. Changes in support parameters have a small effect on the contact loads between surrounding rock and primary support, but increase or decrease the safety factor, resulting in a waste of resources or a situation that threatens the safety of the support. The results of this research provide guidance for the prediction of contact loads between surrounding rock and primary support for dynamic tunnel construction.

• 터널과지하공간
• /
• 제2권2호
• /
• pp.224-236
• /
• 1992

It is very important to determine the thermo-mechanical characteristics of the rock mass surrounding the repository of radioctive waste and the LPG storage cavern. In this study, Hwasoon-Shist. Dado-Tuff adn Chunan-Tonalite were the selected rock types. Temperature dependence of the mechanical properteis such as uniaxial compressive strength, tensile strength, Young's modulus was investigated by measuring the behaviour of these properties due to the variation of temperature. Also, the characteristics of strength and deformation of these rocks were examined through high-temperature triaxial compression tests with varing temperatures and confining pressures. Important results obtained are as follows: In high temperature tests, the uniaxial compressive strength and Yong's modulus of Tonalite showed a sligth increase at a temperature up to 300$^{\circ}C$ and a sharp decrease beyond 300$^{\circ}C$, and the tensile strength showed a linear decrease with increasing heating-temperature. In high-temperature triaxial compression test, both the failure stress and Young's modulus of Tonalite increased with the increase of confining pressure at constant heating-temperature, and the failure stress decreased at 100$^{\circ}C$ but increased at 200$^{\circ}C$ under a constant confining pressure. In low temperature tests, the uniaxial compressive and tensile strengths and Young's modulus of these rocks increased as the cooling-temperature is reduced. Also, the uniaxial compressive and tensile strengths of wet rock specimens are less than those of dry rock specimens.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.245-252
• /
• 2005

An underground research facility (KURF) is under construction at KAERI for the in situ studies related to the validation of a HLW disposal system. For the safe construction and long-term researches at KURF, mechanical stability of the facility should be evaluated. In this study, 3D mechanical stability analysis using the rock mass properties determined from various in situ as well as laboratory tests was carried out. From the analysis, it was possible to predict the rock deformation, stress concentration, and plastic zone developed before and after the excavation. A test blasting was performed to characterize the site dependent dynamic response, which can be used for the prediction of the blasting impact on the facilities in KAERI.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3359-3366
• /
• 2021

An engineered barrier system (EBS) for the deep geological disposal of high-level radioactive waste (HLW) is composed of a disposal canister, buffer material, gap-filling material, and backfill material. As the buffer fills the empty space between the disposal canisters and the near-field rock mass, heat energy from the canisters is released to the surrounding buffer material. It is vital that this heat energy is rapidly dissipated to the near-field rock mass, and thus the thermal conductivity of the buffer is a key parameter to consider when evaluating the safety of the overall disposal system. Therefore, to take into consideration the sizeable amount of heat being released from such canisters, this study investigated the thermal conductivity of Korean compacted bentonites and its variation within a temperature range of 25 ℃ to 80-90 ℃. As a result, thermal conductivity increased by 5-20% as the temperature increased. Furthermore, temperature had a greater effect under higher degrees of saturation and a lower impact under higher dry densities. This study also conducted a regression analysis with 147 sets of data to estimate the thermal conductivity of the compacted bentonite considering the initial dry density, water content, and variations in temperature. Furthermore, the Kriging method was adopted to establish an uncertainty metamodel of thermal conductivity to verify the regression model. The R² value of the regression model was 0.925, and the regression model and metamodel showed similar results.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4005-4012
• /
• 2022

As high-level radioactive waste (HLW) generated from nuclear power plants is harmful to the human body, it must be safely disposed of by an engineered barrier system consisting of disposal canisters and buffer and backfill materials. A gap exists between the canister and buffer material in a HLW repository and between the buffer material and natural rock-this gap may reduce the water-blocking ability and heat transfer efficiency of the engineered barrier materials. Herein, the basic characteristics and thermal properties of granular bentonite, a candidate gap-filling material, were investigated, and their effects on the temperature change of the buffer material were analyzed numerically. Heat transfer by air conduction and convection in the gap were considered simultaneously. Moreover, by applying the Korean reference disposal system, changes in the properties of the buffer material were derived, and the basic design of the engineered barrier system was presented according to the gap filling material (GFM). The findings showed that a GFM with high initial thermal conductivity must be filled in the space between the buffer material and rock. Moreover, the target dry density of the buffer material varied according to the initial wet density, specific gravity, and water content values of the GFM.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.201-208
• /
• 1994

To secure long-term structural safety of underground openings for radioactive waste disposal, the proper structural safety analyses are required. Especially, the structural analysis for underground openings should consider the effects of groundwater pressure. The objective of this study is to develop the structural analysis method for saturated rock masses. In this study, the interaction between groundwater distribution and structural behavior of rock masses are carried out to develop the structural analysis method of saturated rock masses. Then, a 3-Dimensional Multi-Phase Dynamic Analysis Program (MPDAP-3D) has been developed by modifying the existing MPDAP which is based on the concept of 2-dimensional two-phase media.

• 전산구조공학
• /
• 제4권4호
• /
• pp.117-124
• /
• 1991

본 연구에서는 방사성폐기물의 처분을 위한 지하암반공동의 구조거동을 파악하기 위하여 암반내에 존재하는 불연속면의 영향을 고려하면서 지진하중에 대한 지하암반공동의 구조거동을 검토하고자 한다. 이를 위하여 불연속암반체의 수치해석모델에 대한 비교분석을 수행하였으며, 자하암반공동의 동적구조해석을 위한 합리적인 해석모델을 제시하였다. 그리고 개별요소법을 이용한 불연속암반체의 동적구조해석 프로그램을 사용하여 불연속암반체에 굴착된 가상의 지하공동에 대한 공동구조해석을 수행하였다.