• 한국토양비료학회지
• /
• 제49권2호
• /
• pp.138-143
• /
• 2016

The objective of this study was to evaluate the effects of the application of vermicomposts on the growth parameters and ginsenoside content of ginseng roots. Food waste vermicompost (FW), cow manure vermicompost (CM), and paper sludge vermicompost (PS) were applied at 10 and $40t\;ha^{-1}$, respectively. One-year-old seedlings were transplanted and 4-year-old roots were harvested. Soil nitrate and phosphate concentrations were increased in the plots applied with FW and CM at $40t\;ha^{-1}$. Soil pH and exchangeable Ca concentrations were higher at FW $40t\;ha^{-1}$ than at CM $40t\;ha^{-1}$. Root yield increased when treated with FW $40t\;ha^{-1}$ in comparison to the yield for the control. The incidences of root rot disease and ginsenoside content were not significantly affected by the treatments. The results suggested that application of vermicompost might not show a relationship between root biomass and ginsenoside content. It further showed that proper use of vermicompost can promote root yield without a reduction in root quality or an increase in the incidence of root rot disease in reclaimed fields.

• 한국건설관리학회논문집
• /
• 제9권6호
• /
• pp.147-155
• /
• 2008

공동주택은 1970년대의 주택 보급률 증가 정책에 의하여 폭발적인 증가 이후 1990년대 노후 공동주택의 주거성능을 개선하기 위하여 재건축 사업이 활기를 띠게 되었다. 그러나 재건축은 환경파괴, 자원 낭비, 부동산 투기 등의 폐해를 발생시키고 있다. 이에 환경 친화적인 건축과 자원 재활용의 흐름에 따라 리모델링이 대체안으로 부각되고 있다. 국내의 리모델링 사례를 살펴보면 재래식 공법에 의한 공기연장, 비용 상승 등의 문제점이 발생하고 있다. 따라서 리모델링을 활성화시키기 위해서는 공기단축 및 비용절감 효과가 우수하고 현장 노무 인력의 감소 그리고 품질 또한 우수한 PC 기술 등의 프리패브 공법의 활용을 통해 경제성을 확보하려는 노력이 요구된다. 본 연구는 리모델링의 효율성을 높이기 위하여 평면확장 공법의 특성과 리모델링 사례 분석을 통하여 프리패브 공법 활성화 저해요인과 공법선정 프레임웍을 제시하였고, 주체별 프리패브화 접근 방안 제시를 통해 리모델링을 활성화 시킬 수 있는 계기가 될 것으로 사료된다.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.113-120
• /
• 2014

The Green growth has been demanded in all industrial sectors due to environmental destruction and exhaustion of natural resources. Buildings have consumed 1/3 of the total energy and 40% of natural resources and have accounted for 50% of $CO_2$ emissions and 30-50% of waste materials. In 1991, BREEAM(Building Research Establishment Environmental Assessment Method) of the British BRE(Building Research Establishment) had begun reduction of $CO_2$ emissions and energy saving movements, in which all the countries around the world have participated. The Republic of Korea has taken part in this trend by declaring a "National Vision in the Green Growth" in 2008 and implementing regulations on "Low Carbon, Green Growth" in 2010. G-SEED(Green Standard for Energy and Environmental Design) based on GBCS(Green Building Certification System) has been actively promoted for its application. This study has limited its scope to G-SEED office buildings. It has conducted surveys of problems and assessment items of the G-SEED identified in the preceding study by the AHP(Analytic hierarchy process) method. The purpose of this study is to conduct a comparison analysis of problems and ranking of evaluation items recognized in the survey and to be presented as reference materials for G-SEED system improvements at its next amendments.

• 한국세라믹학회지
• /
• 제28권2호
• /
• pp.119-129
• /
• 1991

$\gamma$-FeOOH suitable for magnetic recording media was synthesized using waste acid which is the by-product of the iron works factory. Effects of concentration of the acid and alkali and reaction temperature on the particle properties of $\gamma$-FeOOH and magnetic properties of $\gamma$-$Fe_2O_3$ were studied. $\gamma$-FeOOH single phase was formed below 1M of acid concentration with 1M of alkali concentration and at 0.4M of acid concentration with 4M of alkali concentration. While the width of acicular particle was increased, the length of acicular particle was decreased with diluting acid concentration. The magnetic properties of the $\gamma$-$Fe_2O_3$ improved with increasing acid concentration. $\gamma$-FeOOH single phase was formed in the temperature range of 30 to $80^{\circ}C$. The length of the particle was decreased with increasing temperature. $\gamma$-Fe2O3 produced from dehydration of $\gamma$-FeOOH showed bad magnetic properties due to the presence of many pores in the particle. But with successive reduction and oxidation of $\gamma$-$Fe_2O_3$ produced from dehydration of $\gamma$-FeOOH, $\gamma$-$Fe_2O_3$ showed good magnetic properties.

• 공업화학
• /
• 제26권6호
• /
• pp.686-691
• /
• 2015

본 연구에서는 SRF 성상 변화(RDF, RPF)와 성형 조건 형태(pellet, fluff)에 따른 SRF의 활용을 위한 기초연구로서 SRF의 물리화학적 특성, 연소시간에 따른 고형연료제품의 열적 감량 변화 및 발생되는 배출 가스(NOx, CO, HCl 등) 특성 연구를 수행함으로써 에너지원으로서의 활용을 위한 실험을 진행하였다. 실험결과, RPF 시료가 RDF 시료보다 폐기물의 조성이 플라스틱계열 폐기물로 균일한 성상으로 구성하고 있어 성형에 유리하고 발열량이 높으며, 연소성이 우수하여 연소감량효과도 크며 연소시간도 단축할 수 있을 것으로 판단된다. 또한, fluff 시료가 pellet 시료에 비해 접촉 표면적이 넓어 연소시간도 단축되어 연소효율이 우수하며, 성형에 필요한 자원을 절감할 수 있어 에너지 활용가치가 우수할 것으로 판단된다.

• Membrane and Water Treatment
• /
• 제1권2호
• /
• pp.121-137
• /
• 2010

This work presents inexpensive inorganic precursor formulations to yield submicron range symmetric ceramic microfiltration (MF) membranes whose average pore sizes were between 0.1 and $0.4{\mu}m$. Incidentally, the sintering temperature used in this work was about 800 to $950^{\circ}C$ instead of higher sintering temperatures ($1100^{\circ}C$) that are usually deployed for membrane fabrication. Thermogravimetric (TGA) and X-Ray diffraction (XRD) analysis were carried out to evaluate the effect of temperature on various phase transformations during sintering process. The effect of sintering temperature on structural integrity of the membrane as well as pore size distribution and average pore size were evaluated using scanning electron microscopy (SEM) analysis. The average pore sizes of the membranes were increased from 0.185 to $0.332{\mu}m$ with an increase in sintering temperature from 800 to $950^{\circ}C$. However, a subsequent reduction in membrane porosity (from 34.4 to 19.6%) was observed for these membranes. Permeation experiments with both water and air were carried out to evaluate various membrane morphological parameters such as hydraulic pore diameter, hydraulic permeability, air permeance and effective porosity. Later, the membrane prepared with a sintering temperature of $950^{\circ}C$ was tested for the treatment of synthetic oily waste water to verify its real time applicability. The membrane exhibited 98.8% oil rejection efficiency and $5.36{\times}10^{-6}\;m^3/m^2.s$ permeate flux after 60 minutes of experimental run at 68.95 kPa trans-membrane pressure and 250 mg/L oil concentration. Based on retail and bulk prices of the inorganic precursors, the membrane cost was estimated to be $220 /$m^2$ and $1.53 /$m^2$, respectively.

• 한국컴퓨터정보학회논문지
• /
• 제19권12호
• /
• pp.133-141
• /
• 2014

여러 네트워크 보안기술 중 가장 효과적이고 신뢰할 수 있는 기술인 DPI 시스템에 쓰이는 파이프라인형 AC-DFA 구조에서, 효율적으로 전력 소모를 줄이는 방법을 제안하였다. 이는 메모리 접근 횟수가 전력 소모에 가장 큰 영향을 끼친다는 것과, 파이프라인형 AC-DFA의 스테이지 사용 횟수가 뒤쪽 스테이지로 갈수록 급격하게 감소한다는 관찰결과에 따른 것이다. 이에, 사용되지 않는 스테이지의 동작 클럭을 감소시켜 불필요하게 소모되는 전력을 줄이는 시스템을 구현하였다. 제안하는 방법을 적용한 DPI 시스템에 여러 종류의 문자열이 입력될 때의 전력 소모를 측정한 결과, 기존의 DPI 시스템에 비해 약 25 %의 전력 절감 효과를 가져왔다. 제안한 방법은 파이프라인형 DPI 구조 및 다중 패턴 문자열 검색의 어떤 응용에도 손쉽게 적용될 수 있을 것이다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.272-278
• /
• 2009

The characteristics of hybrid type absorption chiller are studied numerically to use a waste hot water effectively. In the case of the full load, the concentration and temperature of LiBr solution are increase about $11^{\circ}C$, 1.3% respectively at the single effect generator by hot water. As a result, the heat of the high temperature generator are decrease, so the energy can be saved. As the partial load decreased the consumption ratio of fuels are decreased and the reduction ratio of fuels are increased. The variation of COP with the inlet temperature of hot water is higher than that of the flow rate of hot water. The effect of mean temperature difference with solution and hot water of the generator are higher that of flow rate of hot water, it can effect on COP which is sensitive to heat of generator.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.451-458
• /
• 2011

Adhesives derived from renewable resources allow wood panel producers to make lower cost alternatives to formaldehyde-based adhesive resins. Among them, adhesive components extracted from industrial by-products or wastes are the most important research fields in the efficient utilization of waste and cost reduction. In our study, the rapeseed flour, which is a by product from the production of biodiesel extracted from rapeseed, was introduced to develop alternative adhesives for the production of wood flooring. The rapeseed flour was hydrolyzed with 1% sodium hydroxide solution and PF prepolymers were prepared with 3-molar ratios, 1.8, 2.1 and 2.4. The linear fracture mechanics was introduced to evaluate the glue bond quality in wood flooring composed of fancy-veneered and plywood, and the formaldehyde emission and adhesive penetration were also investigated. The formaldehyde emissions of wood flooring met the requirement of the standard of $SE_0$ specified in the KS standard. The rapeseed flour adhesive penetrated sufficiently into the vessel elements and lumens in fancy veneer and plywood and gave strong bond quality to the wood flooring. The fracture mechanics was introduced to evaluate the adhesive joint between fancy veneer and plywood. The critical stress intensity factor ($K_{IC}$) of boliva overlayed wood flooring was increased with increasing molar ratio and this was the same tendency in oak overlayed wood flooring. From the results, the formulated adhesives were efficiently used to bond fancy veneer onto the plywood to make wood flooring and showed a potential to be used as a component of environmentally friendly adhesive resin systems for production of flooring.

• 한국축산식품학회지
• /
• 제35권1호
• /
• pp.50-57
• /
• 2015

Fish sarcoplasmic protein (SP) is currently dumped as waste from surimi industry and its recovery by practical method for being the non-meat ingredient in meat industry would be a strategy to utilize effectively the fish resource. This study was aimed to apply pH treatment for fish SP recovery and evaluated its effect on pork myofibrillar protein (MP) gel. The pH values of fish SP were changed to 3 and 12, and neutralized to pH 7 before lyophilizing the precipitated protein after centrifugation. Acid-treated fish SP (AFSP) showed about 4-fold higher recovery yield than that of alkaline-treated SP and water absorption capacity was also about 1.2-fold greater. Because of the high recovery yield and water absorption capacity, AFSP was selected to incorporate into MP with/without microbial transglutaminase (MTG). The effects of AFSP and MTG on the physicochemical and rheological characteristics of MP and MP gel were evaluated. MTG induced an increase shear stress of the MP mixture and increase the breaking force of MP gels. MP gel lightness was decreased by adding AFSP. MP gel with MTG showed higher cooking loss than that without MTG. A reduction of cooking loss was observed when the AFSP was added along with MTG, where the insoluble particles were found. Therefore, AFSP could be contributed as a water holding agent in meat protein gel.