• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.12-15
• /
• 1993

Critical shortage of natural aggregate for production of concrete is developing in many urban area. At the same time increasing quantities of demolished concrete form deteriorated and obsolete structures are generated as a waste material in the same areas. The reuse of a waste concrete may settle the problems of environmental pollution and shortage of adquate aggregate, Therefore, this study is to reuse a waste concrete as aggregate for concrete, It is the purpose of this present study to investigate and analyze how the addition rates of superplasticizer and curing condition affect the properties of fresh and hardened recycled aggregate concrete comparing with those of ordinary concrete and crushed stone concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.101-102
• /
• 2012

A policy for recycling waste concrete has been extensively studied, but it is still lacking to recycle and reuse as a cementitious powder, and the property has big different depending on the aggregate rates. In this study, the amount of cement powder according to the internal properties of the aggregate were mixed. From as a result, Concrete Powder to play inside the aggregate composition of the cement composition CaO rigs that causes loss of power and strength reduction due to rising real water cement ratio will affect large.

• 대한지리학회지
• /
• 제39권1호
• /
• pp.88-101
• /
• 2004

본 연구는 재활용 생활계 폐기물의 수거경로를 살펴보고, 재활용품에 의한 수거유형과 지역특성과의 관계를 밝히는 것을 목적으로 한다. 분석결과는 다음과 같다. 인구규모가 크고 증가율이 높으며 제2차 산업 인구구성비와 재정자립도가 높은 지역에서는 종이류와 고철류가 주로 수거되고, 인구규모가 작고 증가율도 낮거나 감소하며, 제1차 산업 인구구성비와 농가율이 높은 농촌지역에서는 기타를 포함하여 고철류, 종이류, 병류 등의 다양한 수거가 나타난다. 이는 지역에 발달한 산업에 의해 재활용 생활계 폐기물의 수거유형이 다르다는 것을 의미한다.

• 한국어병학회지
• /
• 제33권1호
• /
• pp.97-101
• /
• 2020

Although aquaculture production rates grown over the years, aquatic animal diseases occur every year which causes substantial economic losses. When an aquatic animal is infected with an aquatic animal pathogen it is either incinerated or buried according to the aquatic life disease control act. Although these methods prevent the spread of disease, it is not environment friendly. Here, we developed an aquatic animal rendering equipment for disposal of fish waste which is environment-friendly and efficient. Also, fertilizer components of fish waste were evaluated value for recycling. The mobile rendering equipment was designed for field operation and/or high temperature and pressure system, oil and water separator, and shredding drying apparatus. During the experiment (July-2016 to November-2016), a total of 53,824 kg fish waste was collected, and 29,216 kg compost of rendering by-product was made. Also, compost made from viral (Viral hemorrhagic septicemia virus) infected fish did not reflect any detectable pathogen. The concentration of nitrogen, phosphorus, and organic matter in the fish waste compost were 2.17%, 26.98%, and 92.44%, respectively. The results suggest that fish waste used in this study was decomposed efficiently as per the official standard for fertilizer product. This equipment can be useful for efficient inactivation of the aquatic animal pathogenic agents and recycling of the fish waste in an environment-friendly manner.

• 대한영양사협회학술지
• /
• 제13권4호
• /
• pp.357-367
• /
• 2007

This research was performed to evaluate the effects of nutrition education on food waste reduction at school food service. A dietitian conducted nutrition education on environmental protection and proper eating attitude and poor eating habits for 3rd and 5th graders at an elementary school in Seoul. The effectiveness of the education was evaluated by surveying the students before and after the education; 375 responses were analyzed. A questionnaire was designed to compare changes of the students' attitudes and plate waste before and after education. Plate wastes of boiled black rice(p<0.05), potato soup(p<0.05), amaranthus herb salad(p<0.01), and cabbage kimchi(p<0.05) decreased significantly after education. Students' eating attitudes improved significantly(t= -6.22, p<0.01) after nutrition education. Major reasons the students did not eat all foods they were served were large portion sizes (30.59%), low menu preference (29.79%), and tastes (17.82%). The menus with high plate waste rates were cooked vegetable items (35.64%) and soup items (26.6%). After education, students' attitudes on ‘food waste pollutes the Earth(p=0.013)’, ‘food preparation for birthday parties(p<0.01)’, and ‘restaurant selection for eating out (p<0.01)’ changed significantly. After education, plate waste and portion sizes that the students perceived were not negatively correlated. In conclusion, nutrition education on proper eating habits and source reduction is an effective method to reduce food waste generation and to improve students' eating attitudes and awareness on environment.

• 폴리머
• /
• 제28권6호
• /
• pp.460-467
• /
• 2004

폐폴리(염화 비닐) 수지 [waste poly(vinyl chloride), RPVC]와 폐폴리에틸렌 수지 (waste polyethylene, RPE)를 용융 블렌드하여 이들의 형태학적 특성과 유변학적 성질을 관찰하였다. 대수 가감 법칙 (Log additivity rule)으로 계산된 값과 측정된 토크 변화를 비교해보면, 고분자 블렌드는 서로 비상용성을 나타내는 음의 편차 거동을 보였다. 평형판 레오미터와 모세관 레오미터를 사용하여 측정한 블렌드의 유변학적 성질은 용융 상태에서 전단 속도가 증가함에 따라 전단 점도가 감소하는 경향을 보였다. RPVC/RPE 블렌드에 상용화제를 첨가하면 단순 블렌드보다 전단 점도가 증가하였으며 이는 상용성이 증가하여 분산상 크기가 감소하는 것을 확인하였다. 전단 점도 측정 후 얻은 시료를 전자 현미경으로 관찰해 보면 전단속도가 증가함에 따라 분산상의 크기가 약간씩 커지는 것이 관찰되었고 또한, 시료의 표면층보다 내부의 분산상이 커지는 것이 관찰되었다.

• 동아시아식생활학회지
• /
• 제9권1호
• /
• pp.64-73
• /
• 1999

The purpose of this study was to estimate the effect of serving sizes on dish wastes, nutrient intake, and diet satisfaction for reduction of dish waste products. The dish waste, energy and protein intake, and satisfaction scores before and after dining were compared in 44 subjects fed various serving sizes(100%, 90%, 80% of standard size) of 10 frequently consumed Korean dishes. The result are as follows: 1. Average age, height, and weight of 44 subjects were 30.5, 174.0cm, and 68.1kg in men and 26.2, 164.2cm, and 53.5kg in women, respectively. 2. There was a significant difference in the dish waste rate of 10 Korean dishes to serving sizes. The range of dish waste rates of 10 Korean dishes was 13.14-33.04%. 3. The average energy intake from 10 Korean dishes in which 100% of the standard serving size was served was lower than Korean RDA. Protein intakes from Sulungtang, Yukgaejang, Deunjang-ggigae, and Bibimpab with 100% servins size, Soondubi-ggigae 90% servins size, and Galbitang, Bulgogi-bakpan, Sangsungui-bakpan, Bakpan 80% of standard serving size were higher than Korean RDA. 4. The satisfaction score before dining on Sulungtang, Bulgogi-bakpan, Sangsungui-bakpan decreased with decreasing serving size. However, there was no significant difference in satisfaction score after dining to serving size. These findings indicate that dish waste rate and diet satisfaction of 10 these Korean dishes are fixed and energy intake is insufficient. Therefore, for reduction of food waste and reasonable serving size of dishes evaluated in this study, there should be more studies about Korean menu development with decreasing serving size and increasing energy density.

• 대한건축학회논문집:구조계
• /
• 제36권4호
• /
• pp.153-161
• /
• 2020

This study investigates the recycling potential of demolition waste (DW) according to building structure, while considering economic aspects. For that, this study surveyed 1,034 residential buildings to collect reliable information on demolition waste generation rates (DWGRs). This study suggested a method for operational cost calculation for each stage and carried out an inventory analysis. The economic value of recycled DW materials was also calculated. And then, the recycling potential(RP) was calculated by building structures and waste types. RP by building structure was low (27-40%), and RP was found in the order of masonry-block, wooden, RC and concrete-brick. By type of DWs, the RP of aggregates was considerably lower than 7%, and DWs such as wood, plastics, and metals showed more than 100% RP. Considering the results of this study, In order to improve the RP of buildings and DWs, the diversification of products that recycled waste like aggregates (i.e., mortar, concrete, bricks, blocks, tiles) and the development of high value-added products are considered to be the most urgent problems. Based on the above RP results, this study proposed a more advanced method for life cycle assessment of buildings and demolition waste.

• 유기물자원화
• /
• 제30권4호
• /
• pp.5-13
• /
• 2022

현대의 환경문제는 다량의 폐기물의 발생과 무분별한 에너지의 소비로 인한 환경오염이 가속화 되고 있다는 것이다. 대표적인 에너지 생산 연료인 화석연료는 에너지를 생산하는 과정에서 연소가 이루어져 다량의 온실가스가 발생하고 최종적으로 기후변화를 야기한다. 또한 전 세계적으로 발생하는 폐기물의 양도 지속적으로 증가하고 있으며 처리하는 과정에서 환경오염이 발생하고 있다. 이와 같은 문제들을 동시에 해결하기 위한 방법 중 하나는 유기성 폐기물의 에너지화 및 감량화이다. 하수처리장에서 발생하는 하수슬러지는 해양매립이 전면 금지된 이후로 다양하게 처리되고 있으나, 그 발생량은 지속적으로 증가하는 추세이다. 하수슬러지는 유기물을 다량 함유하고 있어 혐기소화를 통하여 하수슬러지를 에너지화 하고 최종 배출되는 폐기물을 감량화 하는 것이 바람직하다. 하지만, 잉여슬러지의 경우 대부분이 하수처리에 이용되었던 미생물 덩어리로써 잉여슬러지가 혐기성소화 되기 위해서는 먼저 미생물의 세포벽이 파괴되어야 하는데 세포벽 파괴에는 많은 시간이 요구되기 때문에 혐기성 소화 과정만으로는 높은 바이오가스 생산율이나 폐기물 감량율을 달성할 수 없다. 따라서 잉여슬러지를 가용화하는 전처리 공정이 필요하며, 여러 가지 가용화 공법 중에서 열적 가용화 공정이 가장 효율적인 것으로 검증되었고, 혐기성소화 공정의 전처리 과정으로써 열적가용화 공정을 이용하여 잉여슬러지에 포함된 세포벽을 파괴한 후 전처리 된 잉여슬러지를 혐기성소화 함으로써 높은 바이오가스 생산율과 폐기물 감량율을 달성할 수 있다. 본 연구에서는 열적 가용화장치를 통하여 TS 10%의 농축 잉여슬러지를 전처리하는데 있어서 체류시간 및 운전온도 변수에 따른 가용화 특성에 대한 연구를 수행하였다. 열적 가용화장치의 체류시간에 대한 실험변수는 운전온도를 160 ℃로 고정한 상태에서 각각 30분, 60분, 90분, 120분이었다. 실험 결과로 도출된 TCOD와 SCOD를 통해 계산된 가용화율은 각각 12.11%, 20.52%, 28.62%, 31.40% 순으로 증가하였다. 또한, 운전온도에 따른 변수는 반응시간을 60분으로 고정한 상태에서 각각 120℃, 140℃, 160℃, 180℃, 200℃였으며 가용화율은 각각 7.14%, 14.52%, 20.52%, 40.72%, 57.85% 순으로 증가하였다. 이 외에 TS, VS, T-N, T-P, NH₄⁺-N, VFAs를 분석하여 농축 잉여슬러지를 대상으로 하는 열적 가용화 특성에 대한 평가를 수행 했으며, 그 결과 TS 10%의 농축 잉여슬러지에 대한 열적 가용화를 통하여 30% 이상의 가용화율을 얻기 위해서는 운전온도를 160℃로 고정할 경우 120분의 체류시간이 필요하며, 운전시간을 60분으로 고정할 경우 170℃ 이상의 운전온도가 요구되어 진다.

• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.95-114
• /
• 2023

During the decades after the Fukushima Daiichi Nuclear Power Station (FDNPS) accident, ambient dose rates have markedly decreased when compared to those at the early state of the accident. Government projects have been continuously conducted by surveying the ambient dose rate and radiocesium distributions. Airborne surveys using crewed helicopters and unmanned aerial vehicles (UAVs) are the best methods for obtaining an overall picture of the distribution. However, ground-based surveys are required for accurate measurements near the population. The differences between these methods include the knowledge of the post depositional behavior of radionuclides in land use. The survey results form the basis for policy decisions such as lifting evacuation zones, decontamination, and other countermeasures. These surveys contain crucial findings regarding post-accident responses. This paper reviews the survey methods of government projects and current situation around the FDNPS. The visualization methods and databases of ambient dose rates are also reviewed to provide information to the population.