• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.881-884
• /
• 2008

Nowadays, large amount of waste pottery annually are produced. It is needed that waste pottery is to are used as recycle materials in order to prevent environmental pollution and economic profits. Therefore, the purpose of this study is to present the method of utilizing the cement admixture that is obtained from waste pottery as the cement admixture. The test results that the replacement of waste pottery powder by cement admixture at the level 5%, 7% had effect on the compressive strength of the PHC pile. As a conclusion, improved strength recycled(waste pottery powder) PHC pile can be produced of cement admixture.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.62-68
• /
• 2000

This study was investigated to the recovery of alumina from the first calcined waste pottery using alkaline sintering. This study was based on calcination result of a commercial ${\alpha}-Al2_O_3$ with NaOH powder. $NaAlO_2$ was formed by calcination of ${\alpha}-Al_2O_3$ with NaOH and conversion of $NaAlO_2$ from ${\alpha}-Al_2O_3$ was 91.4% at calcination condition ; weight ritio of $NaOH/{\alpha}-Al2_O_3$ 1.5, $800^{\circ}C$, and 90min. The first calcined waste porrery from the manufacturing Procedure of H Ltd. was grinded to 170/270mesh by a ball mill and calcined over $500^{\circ}C$ with NaOH powder. The calcined sample was dissolved in $25^{\circ}C$ water and sodiumaluminosilicate solid was formed. After filtration, the contained aluminum was leached out by dissolving sodiumaluminosilicate solid in 1N HCl. We estimated the efficiency of Al extraction from waste pottery by ICP analysis and NaOH was added to the filtrate and then aluminum compound was precipitated with $Al(OH)_3$ and recovered. The investigation was carried out with the variables ; the calcination temperature($500-900^{\circ}C$), the calcination time(30~90min), and the weight ratio of NaOH/waste pottery(0.5~1.5). The treatment efficiency of the waste pottery and the recovery of Al as 97.9%, 91.9% were obtained under the optimum conditions as followed ; the weight ratio of NaOH/waste pottery was 1.5 and the calcination conditions were $900^{\circ}C$ and 60min.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.785-788
• /
• 2008

Ceramics manufactures in the nation produced more than 5,000 tons of waste pottery a year increasing industrial waste quantity. However, Almost researches were made to reduce environmental pollution and recycle waste ware. It is needed that they are used as recycled materials in order to prevent environmental pollution and gain economic profits. Therefore, the purpose of this study is to present the method of utilizing the recycled cements that are obtained from waste pottery. The test results that replacement of waste pottery powder by cement admixture at the level 10% had effect on the stripping strength(compressive strength). Also, When GBFS and WP used by cement admixture, WP is better than GBFS.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.99-103
• /
• 2005

Nowadays, large amount of waste pottery and porcelain annually are produced. It is needed that they are used as recycled materials in order to prevent environmental pollution and gain economic profits. Therefore, the purpose of this study is to present the method of utilizing the recycled aggregates that are obtained from waste pottery and porcelain as the concrete aggregate. The qualities of the recycled aggregate were compared with those of the crushed aggregate through measuring their physical properties. The test results showed that the replacement of crushed aggregate by recycled aggregate at the levels $10\%,\;20\%$, and $30\%$ had little effect on the compressive strength of the concretes, but higher levels of replacement reduced the compressive strength. Increment of the replacement of recycled aggregate caused increase in absorption ratio. As a conclusion, norman strength recycled aggregate concretes can be produced using less than $30\%$ of recycled aggregate.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.124-131
• /
• 2004

The adsorption of heavy metals in the waste water carried out on the various domestic clays and waste pottery. The effect of parameters such as pH, temperature, adsorption time and coexisting cations on the adsorption ability and characteristics were investigated to find out whether the clays could be used as adsorbents. Adsorption equilibrium was reached within 20 minutes on all the clays. The optimum pH was found to be above 5. When other cations such as Cu(II) or Zn(II) coexisted with Pb(II), the adsorption amount of Pb(II) decreased because of competing adsorption.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.87-91
• /
• 2011

The purpose of this study is to develop ceramic glazes for the pottery production by utilizing wasted white porcelain, celadon porcelain and bone china thrown away from the areas of Icheon and Yeoju. Most of Korean pottery manufacturers are located in the both areas. According to the XRF analysis, the wasted white porcelain contains over 67 % of silica. It is enough to make a transparent glaze without adding silica. The wasted celadon porcelain contains much $Fe_2O_3$, which is suitable for producing a celadon glaze. The wasted bone china contains 22 % of $P_2O_5$, which is suitable for making a milky white bone china glaze. As a result, it is expected that production of pottery glaze using the wasted porcelains will reduce pollution problems comes from the landfill, and obtain economic effects in terms of resources recycling. It is also expected to be utilized as alternative materials of imported ones.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.119-127
• /
• 2011

Objective of this study is to identify properties on strength increase of hardened concrete and fluidization of non-hardened concrete using waste ceramics generated by construction waste, which is a type of industrial waste, and by ceramics, which is a clay plastic, during its production process, and determine length change ratio caused by drying shrinkage during substitution of recycle aggregate and waste ceramics, and whether they can be used as concrete compounds. Slump of non-hardened concrete exhibited the best fluidization and formability at recycled aggregate's replacement ratio of 60% driven by higher substitution ratio of recycled aggregate and waste ceramics while air content met the KS requirement when substitution ratio of waste ceramics was $4,000cm^2/g$. Compressive strength of hardened concrete exceeded the requirements at early age and standard age and temperature dropped by roughly $6{\sim}10^{\circ}C$ less than the standard at maximum temperature in adiabatic temperature increase, which will hopefully result in stronger durability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.1
• /
• pp.61-68
• /
• 2023

In North Korea, the production of courage tombs continues, and it is known that the activity rate is higher than that of old tombs. However, pot seedling are planted using hoes and shovels used for planting old tombs with exposed roots and low activity rates. This is believed to result in excessive force when stepping on the container grave with a hoe in the planting process, resulting in the collapse of the container grave or the waste of labor due to the creation of unnecessary planting holes. Therefore, when planting courage graves at North Korean afforestation sites, it is necessary to improve the work of making planting holes using general hoes in a way that improves labor productivity in a more efficient manner. As part of inter-Korean technical cooperation to improve the North Korean afforestation method, this study was conducted with the aim of developing efficient container seedlings and using them for North Korean forest restoration projects. It is believed that developing planting equipment exclusively for container graves for forest restoration in North Korea in South Korea and providing equipment and production technology to North Korea can contribute to the development of forest restoration technology in North Korea. If the Yonggeomyo Development Planting Equipment is provided to North Korea, it will be a realistic inter-Korean forest cooperation project to avoid international sanctions by recognizing the excellence of the development products by directly using its own materials through technical cooperation.

• Journal of the Korean Geophysical Society
• /
• v.3 no.3
• /
• pp.175-184
• /
• 2000

A nondestructive experimental feasibility study was conducted using magnetometer to find buried cultural objects at pottery and steel matters in low-relief mountaineous area of Doojeong-dong, Cheonan, Chungnam Province from May 23 to July 18, 1998. Magnetic survey was carried out with $20cm{\times}20cm$ grid in a site of $20m{\times}40m$ before excavation, and the distribution of magnetic anomalies was compared with the results of excavation. Magnetic sensor was located on the surface of ground during the magnetic survey on the basis of an experimental result. Positive magnetic anomalies of maximum 130 nT are found over a pair of potteries. Magnetic anomaly map reveals several anomalous points in the 1st and 4th quadrants of the survey site, from where potteries and their fragments were confirmed. Six points out of seven points cprrelated with magnetic anomaly are found contain earthwares, whereas a magnetically uncorrelated location produced earthware made of unbaked clay. Steel waste such as cans and wires hidden in soil and bushes also influenced magnetic anomalies. Therefore, it is better to remove such steel wastes prior to magnetic survey if possible. Some magnetically anomalous points produced no archaeological object on excavation. This may be explained by shallower level of excavation than burial depth.