• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.657-665
• /
• 2010

Carbon dioxide ($CO_2$) is known to be a major greenhouse gas partially emitted from waste combustion facilities. According to the greenhouse gas emission inventory in Korea, the quantity of the gas emitted from waste sector in 2005 represents approximately 2.5 percent of all domestic greenhouse gas emission. Currently, the emission rate of greenhouse gas from the waste sector is relatively constant partly because of both the reduced waste disposal in landfills and the increased amounts of waste materials for recycling. However, the greenhouse gas emission rate in waste sectors is anticipated to continually increase, mainly due to increased incineration of solid waste. The objective of this study was to analyze the property of Municipal Solid Waste (MSW) and estimate $CO_2$ emissions from domestic MSW incineration facilities. The $CO_2$ emission rates obtained from the facilities were surveyed, along with other two methods, including Tier 2a based on 2006 IPCC Guideline default emission factor and Tier 3 based on facility specific value. The $CO_2$ emission rates were calculated by using $CO_2$ concentrations and gas flows measured from the stacks. Other parameters such as waste composition, dry matter content, carbon content, oxidation coefficient of waste were included for the calculation. The $CO_2$ average emission rate by the Tier 2a was 34,545 ton/y, while Tier 3 was 31,066 ton/y. Based on this study, we conclude that Tier 2a was overestimated by 11.2 percent for the $CO_2$ emission observed by Tier 3. Further study is still needed to determine accurate $CO_2$ emission rates from municipal solid waste incineration facilities and other various combustion facilities by obtaining country-specific emission factor, rather than relying on IPCC default emission factor.

• Journal of the Korean association of regional geographers
• /
• v.11 no.6
• /
• pp.559-570
• /
• 2005

The purpose of this paper is to estimate the effect of population change on waste emission in the case of Busan City. The results are as follows : First, population and waste emission in Busan City Show decreasing pattern since 1995. According to increase or decrease of population and waste emission, The 16 Gus in Busan City are categorited into 5 types. Comparing the difference of population and waste emission between 1995 and 2003, we find out a similar trend by 16 Gus in Busan City. Second, the waste emission shows the positive relation with the number of population and the land by use. But there exists multicollinearity between population and the land by use, and the population is considered the main factor of waste emission. Third, the population causes 92% or more of the waste emission in Busan City, and future researches are required for the additional causes of waste generation.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.462-469
• /
• 2020

This study is proposing a System Dynamics Model for estimating Greenhouse Gas (GHG) emission from treating Municipal Solid Waste (MSW) in South Korea for years 2000 to 2030. The government of country decided to decrease the total GHG emission from waste sector in 2030 as per Business-as-usual level. In context, four scenarios are generated to predict GHG emission from treating the MSW with three processes i.e., landfill, incineration and recycling. For prior step, MSW generation rate is projected for present and future case using population and waste generation per capita data. It is found that population and total MSW are directly correlated. The total population will increase to 56.27 million and total MSW will be 21.59 million tons in 2030. The methods for estimating GHG emission from landfill, incineration and recycling are adopted from IPCC, 2006 guidelines. The study indicates that Scenario 2 is best to adopt for decreasing the total GHG emission in future where recycling waste is increased to 75% and landfill waste is decreased to 7.6%. Lastly, it is concluded that choosing proper method for treating the MSW in country can result into savings of GHG emission.

• Journal of People, Plants, and Environment
• /
• v.24 no.2
• /
• pp.195-207
• /
• 2021

Background and objective: While response measures to particulate matters in rural areas are limited due to poor inventory record keeping in the agricultural sector, it is necessary to control agricultural waste vinyl and the emission of precursors released from open burning and the secondary generation of particulate matters. Currently, the open burning emission calculation method uses the definition prescribed in CAPSS by the National Institute of Environmental Research. Methods: This study presented an open burning emission calculation formula for agricultural waste vinyl, which is included as agricultural waste. As for activity data, the open burning ratio of agricultural waste vinyl, and the annual incineration volume provided in the Status Survey by the Ministry of Agriculture, Food, and Rural Affairs were applied. The emission factor was generated through incineration tests on three agricultural plastic film samples collected by the Korea Environment Corporation. Results: Among precursors, SOx and NOx were selected and their emission features were monitored with incineration experiment infrastructure based on the EPA 5G method. The highest emission concentration by agricultural waste type was concentrated in the first and second quarters. As for emission factor of SO₂, it was calculated at 98.25 g/kg for mulching-use LDPE, 52.31 g/kg for greenhouse-use LDPE, and 14.40 g/kg for HDPE. As for NOx, it was calculated at 18.21 g/kg for mulching-use LDPE, 16.49 g/kg for greenhouse-use LDPE, and 10.67 g/kg for HDPE. Conclusion: This test confirmed the incineration features of PE-based plastics, ascertained the SOx emission factor that had not been included in open burning in the past, and established that low NOx emission concentration is interfered by soil mixed with livestock excretions. The findings from this study are expected to contribute to improving the system for controlling air pollutants in rural environments.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.113-125
• /
• 1998

The amount of mercury emitted from an incinerator depends on the properties of waste, combustion condition, and control devices. Mercury concentration in air proportionates to the increase of incinerator installation. The purpose of this study is to provide a method for determination of mercury emission factor which can predict the amount of mercury emitted from each incinerator specifically. Case study was performed for N municipal waste incinerator. Based on the method presented in this paper, we obtained mercury emission factor as 1.85~1.95 g Hg/t at N Municipal Waste Incinerator and this result was regarded as reasonable when compared with existing mercury emission factor in reference cases. Fluorescent lamps turned out to be the most important source(44.4%) of mercury in municipal waste and its amount will tend to increase, while batteries become less significant. In addition, medical waste is one of the major source of mercury.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.2
• /
• pp.183-190
• /
• 2007

In this study, we have investigated waste incinerators which are one of the major HAPs emission sources. In order to obtain more reliable HAPs emission data from waste incinerators, direct sampling for the possible pollutants from the stack was carried out and the analysis was performed. The purpose of study was to understand the emission status from waste incinerators and recognize the problems and finally to set up a strategy to reduce the HAPs emissions from waste incinerators. The emission concentrations of 8 species of heavy metals and 16 species of PAHs have been analyzed for the first time in Korea. Not only the emission characteristics of HAPs from waste incinerators were identified, but also the analysis of reduction efficiencies for control devices such as BF and wet scrubbing systems was carried out.

• Journal of Climate Change Research
• /
• v.9 no.3
• /
• pp.273-281
• /
• 2018

The purpose of this study is to consider the effectiveness of continuous $CO_2$ emission monitoring in waste incinerator. To prevent global warming, many countries are trying to reduce $CO_2$, the main greenhouse gas. Currently, Korea is implementing an emission trading scheme to reduce $CO_2$, and waste incinerators are included in this scheme as major $CO_2$ sources. However, when using waste incinerators, $CO_2$ is discharged during incineration of various types of wastes, therefore it is very difficult to calculate the amount of emissions according to IPCC guidelines. In addition, the estimation of $CO_2$ emissions by calculation is known to lack of accuracy comparing with actual emissions. Currently, Korea is operating CleanSYS, which enables continuous measurement of gases emitted into the atmosphere. Therefore, it is possible to estimate the $CO_2$ emissions of waste incineration facilities. The IPCC, which published $CO_2$ emission calculation guidelines, recognizes that direct measurement of emission is a more advanced method in cases of various $CO_2$ emission sources such as a waste incineration facility. Also, Korean emission trading scheme guidelines allow estimation of $CO_2$ emissions by continuous measurement at waste incineration facilities. Therefore, this study considers the effectiveness of a direct measurement method by comparing the results of CleanSYS with the calculation method suggested by the IPCC guidelines.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.3
• /
• pp.344-352
• /
• 2007

Quantifying the methane emission from landfills is important to evaluate measures for reduction of greenhouse gas emissions. To estimate methane emission for the entire landfills from 1990 through 2004 in Korea, Tier 1 and 2 methodologies were used. In addition, five different scenarios were adopted to identify the effect of important variables on methane emission. The trends of methane emission using Tier 1 were similar to the disposed waste amount. Methane emission using Tier 2 increased as the degradation of waste was gradually proceeded. This result indicates that disposed waste amount and methane generation rate are the important variables for the estimation of methane emission by Tier 1 and 2, respectively. As for the different scenarios, methane emission was highest with scenario I that the entire landfills in Korea were regarded as one landfill. Methane emissions by scenario III and IV considering different $DOC_F$ values with the waste type and different MCF values with the height of waste layer, respectively, were underestimated compared to scenario II. This result indicates that the method of scenario I employed to most previous studies may lead to the overestimation of methane emission. Therefore, more careful consideration of the variables should be needed to develop the methodologies of greenhouse gas emission in landfills along with the characteristics of disposed waste in Korea.

• Advances in environmental research
• /
• v.9 no.2
• /
• pp.97-107
• /
• 2020

The indiscriminate growth in global population poses a threat to the world in handling and disposal of Municipal solid waste. Rapid urban growth increases the production, consumption and generation of Municipal solid waste which leads to a drastic change in the environment. The methane produced from the Municipal Solid waste accounts for up to 11% global anthropogenic emissions, which is a major cause for global warming. This study reports the methane emission estimation using IPCC default, TNO, LandGEM, EPER and close flux chamber from open dump yards at Perungudi and Kodungaiyur in Chennai, India. The result reveals that the methane emission using close flux chamber was in the range of 8.8 Gg/yr-11.3 Gg/yr and 6.1Gg/yr to 9.1 Gg/yr at Kodungaiyur and Perungudi dump yard respectively. The per capita waste generation was estimated based on waste generation and population. The waste generation potential was projected using linear regression model for the period 2017-2050. The trend of CH₄ emission in the actual field measurement were increased every year, similarly the emission trend also increased in IPCC default method (mass balance approach), EPER Germany (zero order decay model) where as TNO and Land GEM (first order decay model) were decreased. The present study reveals that Kodungaiyur dump yard is more vulnerable to methane emission compared to Perungudi dump yard and has more potential in waste to energy conversion mechanisms than compare to Perungudi dump yard.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.2
• /
• pp.187-194
• /
• 2014

With environmental regulations continuously being strengthened internationally the need to control environmental pollution and environmental load is emerging in Korea. The purpose of this study is to seek methods or using waste cementitious powder as an alternative raw material for limestone through the optimization of raw material and to quantitatively analyze the resulting reduction of $CO_2$ emission in order to contribute to solving the issue of waste, which is the biggest issue in relation to construction and global warming. The results of the study, show that waste cementitious powder can be used as an alternative raw material for limestone at OPC level, but it was also found that mixing fine aggregate cementitious powder into waste cementitious powder significantly affected the substitution rate for limestone with waste cementitious powder and the reduction of greenhouse gas. In particular, when fine aggregate cementitious powder was used at a rate of 0~20%, the substitution rate for limestone and the reduction in the rate of greenhouse gas emission was significantly reduced. It is thought that a technique to efficiently separate and discharge the fine aggregate cementitious powder mixed in waste cementitious powder needs to be developed in the future.