• Title/Summary/Keyword: waste agriculture materials

Search Result 71, Processing Time 0.027 seconds

Effects of organic fertilizers mixed with dehydrated food waste powder on agronomic performance of leafy vegetables

  • Jae-Han, Lee;You-Jin, Choi; Jin-Hyuk, Chun;Yun-Gu, Kang;Yeo-Uk, Yun;Taek-Keun, Oh
    • Korean Journal of Agricultural Science
    • /
    • v.49 no.3
    • /
    • pp.397-405
    • /
    • 2022
  • Castor oil cake is widely used as a raw material for organic fertilizers (OF) in Korea. Compared to other fertilizer raw materials, it is highly dependent on imports. In terms of replacing raw materials, dehydrated food waste powder (FDP) and castor oil cake have similar nutritional content, and if 30% is replaced, about 20% of the raw material cost can be saved. However, few studies on the effects on crop growth and soil properties when organic fertilizer and dry food waste powder are mixed and applied to the soil have been reported. The effects of an organic fertilizer made by mixing the commercial available organic fertilizer with dehydrated food waste (OF + FDP) on soil properties and the growth of two types of leafy vegetables (lettuce and young radish) were evaluated and compared with the performance of OF. The fresh weights of lettuce and young radish were the highest with OF amendment and stood at 114.3 and 119.0 g·plant-1, respectively. These were followed by OF + FDP amendment, which produced 103.1 and 109.6 g·plant-1, respectively. Compared to the control, OF and OF + FDP increased the lettuce fresh weights by about 69% and 52%, respectively, while the fresh weights of the radish were increased by about 223% and 207%, respectively. The soil pH, EC, total carbon content, and organic matter content in OF and OF + FDP increased. The mixture of dehydrated food waste powder and organic fertilizers is expected to improve soil quality and facilitate stable production of crops and contribute to the substitution of imported organic fertilizer raw materials.

Studies on Wood-based Composite Panel with Waste Tire - Properties of Composite Boards in Relation to Hot Pressing Conditions - (폐타이어를 이용한 목질계 복합판넬의 연구 - 열압조건에 의한 재질특성 -)

  • Lee, Weon-Hee;Park, Sang-Jin
    • Journal of the Korean Wood Science and Technology
    • /
    • v.25 no.4
    • /
    • pp.29-38
    • /
    • 1997
  • The effect and control of wood property of reconstituted composite panels for improved board properties by wood-waste materials and development of combination method for heterogeneous materials have been of interest to the wood science researchers. The purpose of this study is to consider the properties in relation to hot pressing conditions and to develope the optimum hot pressing condition with waste wood and waste tire for the manufacturing of composite boards. The study of composite boards for recycling of wood and waste tire is nothing up to the present. Physical and mechanical properties such as specific gravity, moisture content, swelling coefficient, modulus of rupture and modulus of elasticity in bending test were studied. The condition of 3-stage press time for the lowest moisture content of composite board was $4{\rightarrow}3{\rightarrow}3$ minutes. Specific gravity of composite panels was affected mainly by the amount of rubber chip. Because of the low rigidity and high elasticity in rubber chip, it is considered the composite panel was adequate material in the place of compression load, but not bending load. Therefore, it was concluded that a use of rubber-based wood composite panel is proper to the interior materials such as floor a room than exterior materials. From the test results, the most optimum hot pressing conditions were $4{\rightarrow}3{\rightarrow}3$ minutes for 3-stage press time and $45{\rightarrow}20{\rightarrow}5kg/cm^2$ for 3-stage press pressure. The rubber-based wood composite panel was very excellent in elasticity by combination of rubber chip in comparison with existing other wood-based materials. Therefore, it was considered that rubber-based wood composites can be applicable to every interior materials such as floor a room and will be expected to effective reuse and recycle of waste tires and wood-waste materials, and will be contribute to protection of environment pollution in earth.

  • PDF

The review of municipal solid waste management in Nigeria: the current trends

  • Iorhemen, Oliver T.;Alfa, Meshach I.;Onoja, Sam B.
    • Advances in environmental research
    • /
    • v.5 no.4
    • /
    • pp.237-249
    • /
    • 2016
  • The management of municipal solid waste (MSW) is essential for every community; and, it is currently a major challenge in Nigeria. This paper provides an overview of the current MSW management trends in Nigeria and proposes new sustainable MSW management systems. Across Nigerian cities, MSW management is characterized by inefficient collection and transportation to disposal sites. Collection services do not reach some unplanned areas and slums due to poor street network. Even some planned areas are not reached by collection services. The informal sector contributes to waste collection, resource recovery and recycling; however, their activities are not recognized by the governments. Markets exist for recovered materials but more efforts need to be geared towards intensive recovery of materials and expansion of these markets. Despite the high proportion of putrescible matter in MSW, the only form of treatment commonly used currently is open burning for volume reduction. The high organic fraction presents a great opportunity for composting and anaerobic digestion. Ultimate disposal is currently done in open dumpsites. This needs to be upgraded to engineered landfills that are properly sited and adequately operated by well trained personnel. There is an emerging waste stream of concern, electronic-waste (e-waste), that requires urgent sustainable management as e-waste are currently co-disposed with other waste streams or burnt in the open posing detrimental health impacts.

The Production of Alcohol from Municipal Waste(II) - The Effects of Physical or Chemical Treatment on the Enzymatic Hydrolysis of Waste Paper - (도시 폐기물로부터 알코올 생산 (II) - 물리적, 화학적 전처리된 폐지의 효소가수분해 조건 검토 -)

  • Lim, Bu-Kug;Yang, Jae-Kyung;Lee, Jong-Yoon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.25 no.1
    • /
    • pp.65-70
    • /
    • 1997
  • The effects on the enzymatic hydrolysis of waste paper treated with physical or chemical treatment were investigated. To gain the higher saccharification rate, physical or chemical treatment are necessary in enzymatic conversion process of waste paper. The major deterrents to the effective utilization of waste paper for enzymatic conversion process are phenolic compounds, cellulose crystallinity and coating materials. In the enzymatic hydrolysis of waste paper, the deterrents through enzymatic conversion process can be eliminated by the physical or chemical treatment. This study was performed to obtain the optimal condition for enzymatic conversion process of non-treated waste paper and to review effects on enzymatic conversion process of waste paper treated with physical or chemical methods. In the aspect of saccharification rate, waste paper treated with 1.5% sodium hypochlorite was the most effective and in physical treatment methods, multi-stage treatment(autohydrolysis+refining treatment) was more effective than the other physical treatment.

  • PDF

Properties of Waste Paper Composite (폐지 복합재료의 물성)

  • Kim, Chul-Hyun;Kim, Kang-Jae;Eom, Tae-Jin
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.40 no.3
    • /
    • pp.48-52
    • /
    • 2008
  • Waste paper plastic composites were prepared with old newspaper and old corrugated containers and mixed office waste and those properties were evaluated. The results were summarized as fellows. 1. The strength properties like as tensile and Young's modulus reveled most high level in MOW composite. 2. The coagulation of fibers in paper particle should interrupt equal dispersion of polymer and paper particle. 3. The micrograph of the surface of composites showed the most high dispersion in ONP composite.

Characteristics of Anaerobic Degradation on Dewatered Liquid of Household Food Waste. (음식물쓰레기 탈수액의 혐기성 생분해 특성)

  • Kim, Woo-Sung;Seo, Jeoung-Yoon;Lee, Young-Hyeong
    • Korean Journal of Environmental Agriculture
    • /
    • v.17 no.3
    • /
    • pp.234-238
    • /
    • 1998
  • Anaerobic degradation characteristics of dewatered liquid of household food waste including methane conversion efficiency and degradation kinetics were studied in an anaerobic batch reactor of 5 L volume. The ultimate methane production for dewatered liquid of household food waste tested was over 0.31L $CH_4/L{\cdot}dewatered$ liquid of household food waste. The kinetic constant of dewatered liquid of household food waste tested was $0.223d^{-1}/L$. The kinetic behavior of anaerobic degradation was described as a first order series reaction. The determinant of rate-limiting step(DR) that is balanced out from the rates of reaction steps was defined by the logarithmic difference of the maximum acidification rate and the maximum methanation rate. Anaerobic degradation characteristics of organic materials were evaluated by the value of DR. The DR of dewatered liquid of household food waste tested was 1.17.

  • PDF

Use of Multifractors in Paper Mills for Recycled Fibers (I) - Slot screen cases - (고지섬유의 효율적 이용을 위한 Multifractor의 활용분석 (I) - Slot screen을 사용하는 경우 -)

  • Seo, Yung-Bum;Lee, Min-Woo;Kim, Young-Wook
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.42 no.1
    • /
    • pp.13-19
    • /
    • 2010
  • Four waste paper mills in Korea, where multifractors, devices for fiber fractionation, were installed, were selected to investigate how effectively and how differently the multifractors were used. They all used slot-type screens. Effective fiber fractionations by fiber length were expected by the multifractors, but in reality, they were used for selecting fiber furnishes that were flexible and hydrated. Flakes, which meant large fiber bundles, were rejected effectively by the multifractors. There existed a high regression coefficient between the fiber length differences and the freeness differences of the accepted and the rejected fiber furnishes.

A Development of Manufacturing Process of Wooden Footpath Block to Reuse of Wood Waste (목질폐잔재를 재활용한 목질보도블록 제조기술 개발)

  • Park, Hee-Jun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.25 no.3
    • /
    • pp.96-104
    • /
    • 1997
  • The objective of this research project was to develop the wooden footpath block to reuse of wood waste. Some physical and mechanical properties of the wooden block such as water absorption, thickness swelling, modulus of rupture, internal bond, density profile and impact resistance were studied. Water absorption and thickness swelling of the wooden block were greatly reduced when the wooden block was pressed inside the forming device than by conventional hot pressing. Also, Modulus of rupture and internal bond of the wooden block were increased greatly when the pressing was completed inside the forming device. The density profile of the wooden block was improved up to 93.5%, minimum to average density ratio. The wooden block manufactured in this study have excellent physical and mechanical prperties in comparison with existing wood based materials. So, these wooden blocks are applicable to footpth block or other exterior members.

  • PDF

Some Technical Aspects of Composting

  • Hong, Ji-Hyung
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 1993.10a
    • /
    • pp.526-537
    • /
    • 1993
  • The development of composting techniques is essential to the low input sustainable agriculture. This paper resents an evaluation of composting system, compost materials, aeration & temperature effects, compost maturity , and operational concerns for compost utilization. The composting of organic waste is markedly affected by the nature of the feedstock and the operational temperature employed for the process. These two major parameters are critically examined in this paper, with references to the decomposition of the organic waste. Future research should concentrate on the indications of stability and environmental problems.

  • PDF

Evaluation of the properties and the papermaking applicability of the residue originated from the anaerobic digestion of livestock manure (축산분뇨 혐기소화 잔재물의 특성 및 초지 적용성 평가)

  • Kim, Seung Min;Jung, Woong-Gi;Sung, Yong Joo;Ahn, Hee-Kwon;Kim, Dong Sung;Yoon, Do-Hyun;Kim, Dong-Seop;Jung, Hwa Gwang
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.46 no.3
    • /
    • pp.58-64
    • /
    • 2014
  • Management of organic waste such as livestock manure has been considered as very important issue in terms of the environment. The anaerobic digestion of livestock manure become more attractive treatment method and has been widely applied. In this work, the properties of the residue after the anaerobic digestion of livestock manure was evaluated for providing the basic data to develop new application. The lignin and the ash contents of the residue were much higher than those of other biomass such as wood. The components of the residue were also analyzed with SEM-EDS and Elemental Analyzer. The addition of the residue into the handsheet paper resulted in the higher bulk and he higher air permeability with the loss of the strength properties. The water holding capacity of the handsheet were increased until the 40 % addition of the residue.