• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.76-86
• /
• 2022

Calcium (Ca) and potassium (K) were introduced to remove Sr and Cs in soil, respectively. Four factor and three level Box-Bhenken design was employed to determine the optimal washing condition of Ca- and K-based solutions, and the ranges tested were 0.1 to 1 M of Ca or K, L/S ratio of 5 to 20, washing time of 0.5 to 2 h, and pH of 2 to 7. The optimal washing condition determined was 1 M of Ca or K, L/S ratio of 20, washing time of 1 h, and pH of 2, and Ca-based and K-based solutions showed 68 and 81% removal efficiency for Sr and Cs, respectively in soil. For comparison, widely used conventional washing agents such as 0.075 M EDTA, 0.01 M citric acid, 0.01 M oxalic acid, and 0.05 M phosphoric acid were tested, and they showed 25 to 30% of Sr and Cs removal efficiency. Tessier sequential extraction was employed to identify the changes in chemical forms of Sr and Cs during the washing. In contrast to the conventional washing agents, Ca-based and K-based solutions were able to release relatively strongly bound forms of Sr and Cs such as Fe/Mn-oxide and organic matter bound forms, suggesting the involvement of direct substitution mechanism, probably due to the physicochemical similarities between Sr-Ca and Cs-K.

• Journal of agricultural medicine and community health
• /
• v.21 no.2
• /
• pp.159-171
• /
• 1996

It is investigated to determine the removal efficiency of organic - phosphorus insecticide residues in lettuce by washing processes, the 5 washing solution (stagnant tap water, flowing tap water, alkaline solution, acidic solution) were used with the washing time(10, 30, 50sec) and frequencies(1, 2, 3 washing, 2 rinsing). The removal efficiency of residual pesticides by 5 washing methods was increased on the more washing time and frequency, and also was the highest on the 3 times washing for each 50 sec. The removal rate with stagnant tap water was 33.7% of Diazinon, 45.7% of Dimethoate and 24.6% of Fenitrothion, but 29.4% of Diazinon, 37.7% of Dimethoate and 24.5% of Fenitrothion with flowing tap water. Therefore, the former was significantly higher effective than the latter one. The removal rate of residual pesticides with alkaline solution showed 32.1% of Diazinon, 49.5% of Dimethoate and 29.9% of Fenitrothion, and 30.4% of Diazinon, 36.4% of Dimethoate and 21.0% of Fenitrothion with acidic solution. The washing efficiency of neutral detergent showed the most effective result than others with 47.1% of Diazinon, 58.0% of Dimethoate and 39.5% of Fenitrothion. Consequently, it's appeared that the neural detergent washing was the most effective method on the 3 times washing for each 50 sec.

• Journal of the Korean Home Economics Association
• /
• v.36 no.1
• /
• pp.1-11
• /
• 1998

The purpose of this study is to find troubles in producing and using the reclaimed soaps to get the solutions of their troubles. Five kinds of reclaimed soaps were taken from religious or civic organizations and nine kinds of soaps were made by adding sodium hydroxide of different concentrations to the used vegetable oil in our laboratory. Washing efficiency, pH test, BOD, and skin irritability of the reclaimed of manufactured soaps were examined. The washing efficiency of the manufactured soaps were ±80%. The percent of free-alkali tended to increase as the amount of NaOH increased. The skinirritability was proportional to the amount of NaOH added. To make the reclaimed soap, the best percent of NaHO to used oil is 17% or 18% and this ratio(17%∼18%) should be kept. Manufactured soaps by this ratio have good apperance condition and washing efficiency. And also they have low skin irritability and free-alkali. This study has the limitations that the skin irritability test can have individual and the collected soaps couldn't represent all kinds of recaimed soap.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.21-28
• /
• 2015

A small washer powered directly and solely by thermal radiation was constructed and tested to explore the feasibility of using solar energy or other types of thermal radiation for washing and cleaning. In principle, TA (ThermoAcoustic) washers have the benefits of simpler design and operation and fewer energy conversion processes, thus should be more energy efficient and cost less than electric washing/cleaning systems. The prototype TA converter we constructed could sustain itself with consistent fluid oscillations for more than 20 minutes when powered by either concentrated solar radiation or an IR (infrared) heater. The frequencies of water oscillations in the wash chamber ranged from 2.6 to 3.6 Hz. The overall conversion efficiency was lower than the typical efficiencies of TA engines. Change in water temperature had little effect on the oscillatory flow in the TA washer due to its low efficiency. On the other hand higher water temperatures enhanced grease removal considerably in our tests. Methods for measuring the overall conversion efficiency, frictional loss, and grease removal of the TA washing system we designed were developed and discussed.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.30-35
• /
• 2008

In this study, the feasibility of soil washing, chemical oxidation and sonication was investigated to treat lubricantcontaminated railroad soil. Tergitol, a non-ionic surfactant, was used as a washing agent with or without iso-propyl acohol as a cosolvent. However, it was not effective to remove lubricant from soil even though tergitol was the most effective washing agent for diesel-contaminated soil. The cosolvent reduced the overall washing efficiency. Chemical oxidation removed 30% of lubricant from contaminated soil. Soil washing after chemical oxidation extracted additionally 16-17% of lubricant. Sonication enhanced-soil washing showed enhanced overall efficiency of soil washing. Lubricant-contaminated soil should be remediated by the other technology used for diesel-contaminated soil.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.98-104
• /
• 2008

This research was performed to evaluate the extraction characteristics of heavy metals for soil washing of mine tailings-contaminated soil according to particle size distribution and the chemical distributional existence of the metals. As the soil particle size was decreased, the extracted concentrations of heavy metals was increased except Fe and Mn. Most of all heavy metals were extracted within 6 h by soil washing with 0.05 M EDTA. Extraction efficiency of metals was decreased for Pb, Cu, and Zn with decreasing of particle size. Significant difference was not observed in extraction efficiency for Cd according to particle size distribution. Extraction efficiency for Cd was the highest as 86~91%, while the lowest as 5~14% for Fe. Most metals of the soil without soil washing was distributed as reducible, oxidizable, and residual fractions. Pb, Zn, and Cd existed as reducible (Fe/Mn oxide) and residual fractions and Cu existed as oxidizable and residual fractions after soil washing treatment with 0.05 M EDTA. As the soil particle size was decreased, residual fraction was increased for Pb and Cu. About 90% of reducible fraction in Pb, Zn, and Cd was removed by soil washing with 0.05 M EDTA. As the results, it was founded that soil particle size was the important parameter to effect on distributional fraction and extraction efficiency of metals in mine tailings-contaminated soil.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.473-478
• /
• 2005

In home appliances, electric energy is optimally controlled by using power electronics technology, creating a comfortable environment in terms of energy saving, low sound generation, and reduced time consumption. Usually simplicity and robustness make the three phase induction motor attractive for use in domestic appliance, including washing machines. Two main fpes of domestic washing machine have evolved. We focus on the front loading machine favored in Europe, which has a horizontal drum axis. With the advent of electronic control, universal motor, with a phase controller operating directly from the ac source, has become popular in washing machine. The efficiency improvement in home appliances is very important for customers. Induction motor efficiency can be improved by means of loss reduction, which can be realized by motor selection and design, improvement of the waveforms supplied by power inverter, utilizing a suitable control method. So this paper describes the architecture and feature of washing machine fed induction motor drive under minimizing losses vector control.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.78-83
• /
• 2010

On the paved track, the ballast is used as aggregate for the filling layer using the pre-packed concrete technique. The most important condition of aggregate is adhesive strength with mortar. To satisfy this condition, surface of aggregate should be cleaned by water or others. In a paved-track method to be introduced domestically, an environment-friendly dry-washing technology which will replace the water-washing method has been developed. A dry-washing method was designed to blast the crushed weight material with a diameter of 0.3~0.5mm at high pressure to peel the surface of the aggregate. The study was intended to enhance the washing efficiency of dry-blasting technology and to that end, the tests including blasting material, content of fine aggregate depending on time elapsed, content of chloride, LA abrasion rate and compressive strength were conducted to recommend the efficient washing material and the process.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.10a
• /
• pp.12-15
• /
• 1999

Soils collected from an agricultural field in Youngdong, Chungbuk province were intentionally: contaminated with lead and copper. The efficiencies of soil washing with HCl, SDS and Tween 80 were investigated through the column mode experiments. Washing with 0.1 N HCl obtained the best result for lead and copper removal (95.04 %, 95.94 %). In case of SDS, lead and copper removal rate was such poor as 7.1 % and copper was 24.04 %, respectively. Meanwhile, washing of contaminated soil with Tween 80, did not show any significant removal effect. It was found that the washing efficiency was dependent on pH of washing agent.

• Journal of Environmental Science International
• /
• v.9 no.5
• /
• pp.437-441
• /
• 2000

A study on the removal of Pb ion from Pb-contaminated soil was carried out using ex-site extraction process. Tartaric acid (TA) and iminodiacetic acid sodium salt(IDA) as a washing agent were evaluated as a function of concentration reaction time mixing ratio of washing agent and recycling of washing agent. TA showed a better extraction performance than IDA. The optimum washing condition of TA and IDA were in the ratio of 1:15 and 1:20 between soil and acid solution during 1 hr reaction. The total concentrations of Pb ion by TA and IDA at three repeated extraction were 368.8 ppm and 267.5 ppm respectively. The recovery of Pb ion from washing solution was achieved by adding calcium hydroxide and sodium sulfide form the precipitation of lead hydroxide and lead sulfide and optimum amounts of sodium sulfide and calcium hydroxide were 7 g/$\ell$ for the TA washing solution and 4 g/$\ell$, 5g/$\ell$ for the IDA washing solution respectively. The efficiency of recycle for TA and IDA washing solution were 78.8% , 95.1%, and 89.2%, 96.6% at third extractions under $Na_2S$ and $Ca(OH)_2$, respectively.