• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.173-179
• /
• 2012

Silk fabric treated with fluorocarbon resins (Asahi Guard AG-7005 and AG-E061) were washed and subsequently heat treated varying the washing cycles and the temperature. After the processing, the water and oil repellencies, and contact angle to water were evaluated. The water and oil repellencies decreased by the washing and recovered by following heat treatment. Also ESCA measurement was carried out to investigate the surface chemical composition of the treated fiber. The $F_1s$ intensity of the treated fabric decreased by the washing and recovered by the subsequent heat treatment. On the other hand, the $O_1s$ intensity increased by the washing and decreased by following heat treatment. From the results, it is clear that change of the water and oil repellencies of the silk fabric treated with fluorocarbon resin occurred by the washing and subsequent heat treatment. Considering a change of the water repellency of the silk fabric treated with fluorocarbon resin, it seems likely that the fluoroalkyl group of the fluorocarbon resin rotates from surface to inside of the fiber by the washing to adapt to the hydrophilic circumstance, and the orientation of the fluoroalkyl groups of the resin disturbed by the washing recovers the orientation to the fiber surface after the subsequent heat treatment.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.87-91
• /
• 2008

It is commonly known that water repellency of the fabric treated with fluorocarbon resin brings about a decrease by the washing and recovers by the subsequent heat treatment. In this article, effect of the water repellency was investigated on the nylon 6, triacetate and silk fabrics treated with hydrocarbon and silicon resins. Hydrocarbon and silicon resins have been widely used in the textile finishing as the softening and water proofing agents. The fabrics were treated with hydrocarbon resins, Paragium JQ and RC (Ohara Paragium Chemical Co.) and a silicon resin, Poron MR (Shinetsu Chemical Co.), and then washed and subsequently heat treated. Although the water repellency increased by the resin treatment, it decreased by the washing apparently and recovered a little by the heat treatment. The effect of the heat treatment was small comparing with that of the fluorocarbon resin. Furthermore, as a mechanical property of the treated fabric, KES shearing and bending hysteresis parameters, modulus and hysteresis width of the hydrocarbon resin-treated nylon 6, triacetate and silk fabrics decreased by the heat treatment after washing. Therefore, the treatment is effective at improving the softening of the fabric in water repellent finish.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.344-347
• /
• 2003

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2$TaF$_{7}$ as feed material, KCl and KF as a diluent in a stainless steel (SUS) bomb, using the method of metallothermic reduction. And we examined various types of after-treatment that affect the high purification of powder. A significant amount of impurities contained in recovered powder was removed in various conditions of acid washing. In particular, 20% (HCl + HNO$_3$) was effective in removing heavy metal impurities such as Fe, Cr and Ni, 8% H$_2$SO$_4$ + 8% $Al_2$(SO$_4$)$_3$ in removing fluorides such as K and F from non-reactive feed material, and 2% $H_2O$$_2$ + 1 % HF in removing oxides that formed during reaction. Significant amounts of oxygen and part of light metal impurities could be removed through deoxidation and heat treatment process. On the other hand, because it is difficult to remove completely heavy metal impurities such as Fe, Cr, and Ni through acid washing or heat treatment process if their contents are too high, it is considered desirable to inhibit these impurities from being mixed during the reduction process as much as possible.

• 한국염색가공학회지
• /
• 제13권3호
• /
• pp.180-187
• /
• 2001

Generally, polyester microfiber has much greater dye uptake than that of regular ones. In spite of high dye up-take visual shade depth of dyed fabric decreases with smaller denier, which results in poor washing fastness of dyed fabric. In this study, in order to investigate the washing fastness, polyester microfiber fabric was dyed by using two type of disperse dyes and treated with 3 different reduction clearing methods. The reduction clearing methods in this study are normal alkaline reduction clearing, $N_2$ gas replacement method, and ultrasonic treatment during reduction clearing. The results were as followings ; The most important factors affecting the washing fastness of polyester artificial suede fabric were found to be the reduction clearing method, the chemical structure of used disperse dyes and the structure and denier of fibers. It was also obtained that the heat treatment of dyed fabric decreased the washing fastness due to the dye migration from inner phase to surface.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.225-232
• /
• 2019

The colorants of kale powders were optimally extracted using an 1:1 mixture solvent of ethanol and DMSO at 105℃ for 30 minutes obtaining a high yield of 359.7㎍/mL chlorophylls. Low color fastness of the dyed fabrics with the extracts, particularly against washing and solar radiation, can be overcome by the combined treatments of chitosan, heat setting and tannic acid. Washing fastness to color change was improved from rating 1-2 up to 5 due to the enhanced electrostatic interactions between the colorants and the positive glucosamine unit of the chitosan in the cationized cotton. In addition, the tannic acid treatment contributed to the additional increase in color fastness after the sequential treatments of chitosan pretreatment, dyeing and heat setting.

• 한국주조공학회지
• /
• 제28권5호
• /
• pp.237-241
• /
• 2008

This study has been carried out to investigate the wear and heat resistant properties of durable moldwash agent for Al gravity casting according to mold washing process conditions. The wear properties of coated specimen were performed by sliding wear testing machine and heat resistance were evaluated by measuring the loss of coated moldwash agent during emerging of coated specimen in Al melts. During testing, experimental variables were mold surface temperature, moldwash agent/distilled wear, and additive concentrations. The lower additive concentration and mold temperature caused the smooth surface roughness of coated specimen, It was found that the specimen coated with moldwash/water ratio 1:3, additive concentration 9wt% and mold temperature higher than $200^{\circ}C$ showed superior wear and heat treatment. Also, these results were supported by fluidity test.

• 생물환경조절학회지
• /
• 제21권4호
• /
• pp.411-418
• /
• 2012

환경친화적인 농산물 살균소독 세척방법으로 소성칼슘 및 열처리에 의한 신선편이 브로콜리 저장 중 품질 및 미생물적인 안전성 향상 효과를 구명하기 위하여 본 연구를 수행하였다. 브로콜리를 절단한 뒤 수돗물, $50{\mu}L{\cdot}L^{-1}$ 염소수 및 $1.5g{\cdot}L^{-1}$ 소성칼슘 용액과 $45^{\circ}C$의 수돗물 열처리, 열처리와 살균소독제를 혼합한 $45^{\circ}C$의 $1.5g{\cdot}L^{-1}$ 소성칼슘 용액에서 각각 2분 세척하였다. 그리고 신선편이 브로콜리를 $50{\mu}m$ PE 필름에 포장하여 $5^{\circ}C$에서 9일 저장하면서 기체조성, 전기전도도, 미생물수, 색 및 관능적인 품질을 조사하였다. 포장내부의 기체조성은 열처리에서 $O_2$ 농도가 낮고, $CO_2$ 농도는 높았으나 비열처리구에서는 살균소독 방법 간에 차이가 없었다. 소성칼슘 및 염소수 살균소독처리는 수돗물 처리보다 신선편이 브로콜리의 미생물 감소에 효과적이었고 열처리는 저장 3일까지는 효과가 있었으나 6일 이후에는 나타나지 않았다. 전기전도도는 소성칼슘 + 열처리에서 높게 나타났고, 색은 저장기간이 지나면서 명도가 낮아지고 황색도는 증가하였으나 살균소독 처리간에는 차이가 나타나지 않았다. 신선편이 브로콜리 저장 중 미생물수는 소성칼슘 단독처리가 염소수와 비슷한 수준으로 저장 9일 동안 일반세균수 제어효과를 나타냈고, 대장균군도 수돗물 처리보다 저장기간 내내 적게 나타났다. 또한 브로콜리 절단면의 변색 억제에는 열처리가 효과적이었으나 이취는 높게 나타났으며, 비열처리구에서 소성칼슘 용액처리는 염소수와 같이 수돗물보다 외관이 우수하고, 이취가 적게 나타났다. 따라서 소성칼슘 처리는 환경친화적인 방법으로서 신선편이 브로콜리의 염소 살균소독 세척을 대체할 수 있는 방법으로 판단되었다.

• 열처리공학회지
• /
• 제19권5호
• /
• pp.262-269
• /
• 2006

The development of eco-friendly low pressure carburizing system with high pressure gas quenching(LPC-GQ, 500kg/charge) led to new stage in the fundamental case-hardening treatments. This is due to its ability to provide tighter tolerances on the carburizing process with notable reductions in distortion of the carburized and hardened workpiece. This system is characteristics by high uniformity and reproducibility of heat treatment results, absence of an intergranular oxidation layer, carburizing of complex shapes, reduced cycle time, low operating costs, simplified production, eliminate post washing, and reduced grinding costs.

• 한국식품영양과학회지
• /
• 제38권5호
• /
• pp.612-617
• /
• 2009

녹즙 제조 시 미생물 생육 억제를 위한 유일한 공정은 세척처리 공정이므로 비가열 살균기술인 오존 처리기술을 이용하여 녹즙 원료들의 세척공정(정선 원료, 1차 세척, 오존처리 및 2차 세척) 중 미생물 및 주요 화학성분의 변화를 측정하였다. 정선 원료의 일반세균수는 $8.2{\times}10^5{\sim}5.0{\times}10^6\;CFU/g$으로 식품공전에서 제시한 105 CFU/g보다 높은 균수를 보여 위생화가 반드시 필요하였다. 그러나 1차 세척 후 오존처리 시 $4.7{\times}10^4{\sim}6.7{\times}10^4\;CFU/g$으로 약 2 log cycle의 감균 효과를 볼 수 있었으며 2차 세척에서는 큰 차이가 없었다. 녹즙 원료의 대장균군수는 $8.0{\times}10^3{\sim}3.5{\times}10^3\;CFU/g$이었으나 오존처리 시 $1.5{\times}10^2{\times}3.0{\times}10^2\;CFU/g$로 초기에 비하여 약 1 log cycle 정도의 감균 효과를 보였다. 한편 세척공정 중 ascorbic acid, flavonoid 및 polyphenol 화합물, 무기물(카드뮴 및 납)의 함량 변화는 유의적인 함량 변화를 볼 수 없었으며 색상차이도 없는 것으로 나타났다. 따라서 녹즙 원료의 위생화를 위한 오존처리 시 미생물 수를 감소시킬 수 있었으며 화학적인 변화는 없는 것으로 나타났다.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.