• 복식문화연구
• /
• 제23권6호
• /
• pp.1082-1096
• /
• 2015

The purpose of this study was to examine laundry behavior according to the number of households and the type of washing machine that each household used. The data was obtained from questionnaires filled out by 417 households, which included college students living in Seoul and Gyeonggi province. The results of this study are as follows: first, according to the results of survey about the number of household members and type of washing machine that household had, one or two-person households accounted for 24.0%. Regarding the type of washing machine that each household used, there were more drum washers. In households comprised of three or more persons, a higher percentage had a machine with a pulsator. Second, with regard to the method of classifying the wash in doing the laundry, all families classified the wash according to color and textile material. Third, with regard to the amount of detergent in doing the laundry, 63.5% of households used the recommended amount of detergent while 28.3% of households used more detergent than the recommended amount. Fourth, with regard to the set temperature of water in doing the laundry, 36.2% of households used cold water; this was the highest percentage. Fifth, with regard to input sequence in doing the laundry, most households put the wash in the machine in advance, and then filled the washer with water; 56.1% of households added a rinsing process for all washing processes.

• 자원리싸이클링
• /
• 제8권3호
• /
• pp.3-8
• /
• 1999

농업용 폐비닐 재활용을 위하여 공기를 이용한 세척기를 개발하였으며, 이를 이용하여 농업용 폐비닐을 세척하였다. 세척된 폐비닐에 남아있는 잔류 흙의 양을 TGA로 그리고 구성 성분은 DSC로 분석하였다. 재활용 비닐의 물성은 인장 시험으로 측정하였으며, 구맹된 수지와 비교하였다. 재활용 비닐의 주요 구성성분은 PE로 HDPE, LLDPE, LDPE, EVA가 10:6:3:1비로 나타났다. 공기세척지로 30분 세척된 폐비닐은 2.1%의 잔류량을 보였으며, 한국자원재생공사에서 물로 세척된 폐닐은 1.5%의 잔류량을 보였다. 세척된 비닐의 물성은 구매된 수지를 같은 비율로 혼합한 시료와 비슷한 값을 보였다.

• 한국의류학회지
• /
• 제31권1호
• /
• pp.57-67
• /
• 2007

The purpose of this study is to find out the better washing condition, especially on detergent contents to satisfy the consumer's concern on fabric hand using Drum Type Washer. The hand and preference of washed fabrics by various detergent contents were analyzed through subjective evaluation using questionnaire method in dry and wet state. Wine rank's semantic differential scale questions were developed with 27 kinds of adjective pairs and seven rank's scale questions were to evaluate preference of washed fabrics oil holistic touch, washing and rinsing effect and purchase intention of detergent. Group of trained panelists and untrained women panelists of $30{\sim}40$ years old were participated. The factors affecting consumer's taste for the washed fabrics were analyzed by SPSS 12.0. Smoothness showed relatively higher correlation with preference of washed fabrics on holistic touch, washing and rinsing effect and purchase intention of detergent. There were significant differences in preference of washed fabrics on holistic touch, washing and rinsing effect and purchase intention of detergent by detergent contents when tested in wet state. Fabrics washed with detergents of non-zeolite were appeared to be the preferred ones.

• 한국항공우주학회지
• /
• 제37권3호
• /
• pp.307-313
• /
• 2009

우주 발사체의 비행 중에 파이로 충격은 일반적으로 여러 단 분리, 페어링 분리, 그리고 위성 분리 시 화약을 이용한 분리 장치의 작동에 의해 발생하게 된다. 이러한 분리 이벤트 시 고주파 영역까지 큰 가속도가 유발되는 천이 진동 현상이 유발되어 위성 또는 발사체의 전자 장비가 비정상적인 기능을 보일 수 있다. 본 논문에서는 이러한 파이로 충격 절연을 위해 형상기억합금 소재를 적용하여 두 종류의 메쉬 와셔 절연계를 소개하였다. 한 종류는 형상기억합금의 의탄성 효과를 주로 이용하였고 다른 한 종류는 형상기억효과를 주로 이용하였다. 형상기억합금 절연계의 기본적인 하중-변위 선도를 파악하기 위해 압축 시험을 수행하였고 그 결과로 절연 가능성을 확인하였다. 파이로 충격 절연 시험을 수행하여 형상기억합금 절연계의 절연 성능이 뛰어남을 확인하였으며 추가로 랜덤 진동 시험을 통해 각 절연계의 동특성을 살펴보았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.311-312
• /
• 2008

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2001년도 추계학술대회
• /
• pp.51-51
• /
• 2001

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.725-726
• /
• 2011

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 하계학술발표대회
• /
• pp.152-152
• /
• 2005

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.613-614
• /
• 2013

• Journal of Biosystems Engineering
• /
• 제34권3호
• /
• pp.167-174
• /
• 2009

This study was conducted to develop an agaricus bisporus washing machine which uses compressed air to remove foreign materials attached on the surface of agaricus bisporus. A prototype of the washing machine was constructed, and performance of removing foreign materials was tested. Research results are as follows: 1. Several transferring methods including PE roller rotation, brush roller rotation, PE screw rotation, vibration plate, and belt conveyor were evaluated. Roller, screw, and vibration methods caused damages on the surface of the products, but belt conveyor method caused the least damages. 2. For air jet, a stationary nozzle type and a rotational type were evaluated. The best air jet nozzle was the jet-type nozzle, and the rotational type was more effective than stationary type nozzle. 3. With the conveyer belt, box type moving method and the rotational air jet nozzle, the washing machine showed the best performance when higher than 5.4${\times}$105 Pa of air jet pressure and lower than 0.047 m/s of moving speed was used. Working performance of the system was 650 kg/h, and the damaging rate was 1.2 %.