• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.205-209
• /
• 2003

The condensation water temperature $(T_{CW})$ distributions on the combi-drum washer of condensation type which the cloth washes, rinses, spins and dry cloth over a heater were measured using the thermocouples. During the drying process, in order to find out the relationship between the $T_{CW}$ distribution and the cloth dryness level $(C_{D1})$, the experiment was made for the dehydration rate of the cloth $(C_{D0})$ is 63%, the weight of cloth $(W_{C0})$ from 1 to 6kg. In result, according to $W_{C0}$ and $C_{D0}$, the distributions of $T_{CW}$ are very different. Using this tendency, it was appropriate and it developed the automatic drying algorithm and it was gotten dryness level regardless of $W_{C0}$, $C_{D0}$ and the other factor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.872-876
• /
• 1996

Most studies of rotary machinery design have been performed to establsih a new mechanism or a dramatic combination of machine elements for the power transmission. Although the rotary machine is worked very efficiently, that still has a major work to better performance which is the optimization of the selected mechanism for the mechanical efficiency, low vibration and noise, or customer interest. This work presents a practical approach used for washer's efficiency and machinery vibration and noise reduction along with a systematic procedure. Also for the confirming the study, a computer simulation program and a real working mock-up are developed and used to show very good agreement with the analytical result.

• 한국의류학회지
• /
• 제23권5호
• /
• pp.737-744
• /
• 1999

Underwear made of plain and 1$\times$1 rib-knit cotton fabric were laundered to evaluate the change of the size and the tensile properties. For laundering pulsator and drum washers were used. After 30 washing cycles the amount of shrinkage and the extension were different with washer types. Underwear laundered by the drum type was shrunken in the neck line armhole line and hem line were extended and the bodice width and side length were shrunken,. Tensile strength of the knitted fabric was not decreased through repeated washings because the fabric density was increased. But it was confirmed by SEM that the surface of the fiber was damaged by washings.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.442-447
• /
• 2006

In semiconductor manufacturing clean rooms, it becomes important to remove airborne molecular contaminants as well as particulate contaminant in outdoor air introduced into clean rooms. One suitable control technique for these chemical contaminants is air washing by water in an outdoor air handling unit. In order to enhance the removal efficiency of chemical contaminants the effect of adding a heating and humidifying process before an air washer was examined.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.988-992
• /
• 2006

In recent semiconductor manufacturing clean rooms, air washers are used to remove airborne gaseous contaminants such as $NH_3,\;SO_x$ and organic gases from outdoor air introduced into clean room. Meanwhile, there is a large quantity of exhaust air from clean room. It is desirable to recover heat from exhaust air and use it to reheat outdoor air. In the present study, an experiment was conducted to investigate the heat recovery and gas removal efficiencies of a direct atomization type heat recovery air washer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.330-330
• /
• 2007

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.331-331
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.501-502
• /
• 2011

• 대한기계학회논문집B
• /
• 제37권3호
• /
• pp.249-257
• /
• 2013

쾌속조형기술을 이용한 3차원 형상의 인공지지체가 조직공학 적용을 위해 개발되고 제작되었다. 본 연구에서는 폴리머 적층 시스템을 이용한 스캐폴드 제작에 있어 시린지 노즐 부분에 노즐 가이드를 장착하여 폴리머 적층 폭과 높이 실험을 수행하였다. 이 때 인공지지체 제작을 위한 생체재료로 폴리카프로락톤이 사용되었다. 폴리머 적층 공정 조건으로는 600 kPa의 공압과 $125^{\circ}C$의 온도가 이용되었다. 성공적인 와셔 인공지지체 제작을 통해 폴리머 적층 시스템에 적용된 노즐 가이드의 성능이 검증되었다. 결론적으로, 향상된 폴리머 적층 시스템을 이용함으로써 복잡한 형상의 조직공학용 3 차원 인공지지체를 제작할 수 있을 것으로 기대된다.

• 항공우주시스템공학회지
• /
• 제12권2호
• /
• pp.46-58
• /
• 2018

고해상도 관측위성의 대용량 영상 데이터 송신용인 2축 짐벌식 X-밴드 안테나는 궤도 임무수행 중 안테나 구동에 따라 미소진동을 유발하며, 이는 관측위성의 영상 품질을 저하시키는 요인 중 하나이기 때문에 반드시 절연되어야 할 대상이다. 본 논문에서는 상기 X-밴드 안테나의 방위각 구동에 따른 미소진동절연과 동시에 기존에 제안된 티타늄 블레이드 기어가 소성변형에 취약한 문제점을 보완하기 위해 초탄성 형상기억합금 (SMA)을 활용한 메쉬 와셔 기어를 제안하였다. 상기 SMA 메쉬 와셔 기어의 기본 특성을 파악하기 위해 SMA 메쉬 와셔 두께방향 정하중 시험과 SMA 메쉬 와셔 기어 수준의 회전방향정하중 시험을 실시하였다. 아울러 안테나 조립체 수준의 미소진동 측정시험을 통해 제안된 SMA 메쉬와셔 기어의 진동절연이 효과적임을 입증하였다.