• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.61-65
• /
• 2011

Several previous works on rocket nozzle flows have revealed the existence of the transition from FSS to RSS and the occurrence of asymmetric flow associated with the boundary layer separation, which can cause excessive side-loads of the propulsion system. Thus, it is of practical importance to investigate the asymmetric flow behaviors of the propulsion nozzle and to develop its control method. In the present study, the asymmetric flow control method using a cavity system was applied to supersonic nozzle flow. Time-dependent asymmetric flow was experimentally investigated with the rate of change of the nozzle pressure ratio. The results obtained showed that the cavity system installed on nozzle wall would be helpful in fixing the unsteady motions of the boundary layer separation, consequently reducing the possibility of the occurrence of the asymmetric flow.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.440-446
• /
• 2013

To understand transition characteristics from wood to charcoal, Quercus variabilis wood was carbonized at 200, 250, 300, 340, 540 and $740^{\circ}C$, respectively. Heating value, pH and surface property by FT-IR spectroscopy of the carbonized charcoal were investigated. Heating value and pH increased with increasing carbonization temperature from 4500 cal/g and 4.3 of the control wood to 8,000 cal/g and 9 of the charcoal carbonized at $740^{\circ}C$, respectively. From FT-IR spectroscopy, the peaks from O-H, C-H and C-O stretching disappeared during carbonization at 540 and $740^{\circ}C$. Aromatic skeletal vibration at near $1,506{\sim}1,593cm^{-1}$ was repidly increased until $540^{\circ}C$. These results suggest that the chemical and physical characteristics of wood components in cell wall can be easily changed by increasing carbonization temperature and the carbonization seem to be incomplete at temperature below $540^{\circ}C$.

• Structural Engineering and Mechanics
• /
• 제19권4호
• /
• pp.401-411
• /
• 2005

The influence of cracks on the elastic deflection and ultimate bearing capacity of eccentric thin-walled columns with both ends pinned was studied in this paper. First, a method was developed and applied to determine the elastic deflection of the eccentric thin-walled columns containing some model-I cracks. A trigonometric series solution of the elastic deflection equation was obtained by the Rayleigh-Ritz energy method. Compared with the solution presented in Okamura (1981), this solution meets the needs of compatibility of deformation and is useful for thin-walled columns. Second, a two-criteria approach to determine the stability factor ${\varphi}$ has been suggested and its analytical formula has been derived. Finally, as an example, box columns with a center through-wall crack were analyzed and calculated. The effects of cracks on both the maximum deflection and the stability coefficient ${\varphi}$ for various crack lengths or eccentricities were illustrated and discussed. The analytical and numerical results of tests on the columns show that the deflection increment caused by the cracks increases with increased crack length or eccentricity, and the critical transition crack length from yielding failure to fracture failure ${\xi}_c$ is found to decrease with an increase of the slenderness ratio or eccentricity.

• Korean Circulation Journal
• /
• 제48권12호
• /
• pp.1135-1144
• /
• 2018

Background and Objectives: Mitochondria play a key role in the pathophysiology of heart failure and mitochondrial permeability transition pore (MPTP) play a critical role in cell death and a critical target for cardioprotection. The aim of this study was to evaluate the protective effects of cyclosporine A (CsA), one of MPTP blockers, and morphological changes of mitochondria and MPTP related proteins in monocrotaline (MCT) induced pulmonary arterial hypertension (PAH). Methods: Eight weeks old Sprague-Dawley rats were randomized to control, MCT (60 mg/kg) and MCT plus CsA (10 mg/kg/day) treatment groups. Four weeks later, right ventricular hypertrophy (RVH) and morphological changes of right ventricle (RV) were done. Western blot and reverse transcription polymerase chain reaction (RT-PCR) for MPTP related protein were performed. Results: In electron microscopy, CsA treatment prevented MCT-induced mitochondrial disruption of RV. RVH was significantly increased in MCT group compared to that of the controls but RVH was more increased with CsA treatment. Thickened medial wall thickness of pulmonary arteriole in PAH was not changed after CsA treatment. In western blot, caspase-3 was significantly increased in MCT group, and was attenuated in CsA treatment. There were no significant differences in voltage-dependent anion channel, adenine nucleotide translocator 1 and cyclophilin D expression in western blot and RT-PCR between the 3 groups. Conclusions: CsA reduces MCT induced RV mitochondrial damage. Although, MPTP blocking does not reverse pulmonary pathology, it may reduce RV dysfunction in PAH. The results suggest that it could serve as an adjunctive therapy to PAH treatment.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.70-77
• /
• 2003

전이금속을 촉매로 이용하여 화학기상증착법 (CVD)으로 탄소나노튜브 (CNT)를 성장시킬 때, 질소분위기가 성장을 증진시킨다는 사실은 잘 알려져 있다. 본 논문에서는 질소분위기에 의한 CNT 성장증진의 원인이 활성화 질소이며, 활성화 질소가 성장과정 중 CNT의 탄소와 결합함으로써 성장증진효과가 일어남을 보여주었다. 이 결과는 질소의 결합이 튜브상의 흑연판을 만드는데 필요한 탄성변형에너지를 낮추어 주는 역할을 한다는 CNx 박막의 이론적 계산결과와 일치한다. 따라서, 질소의 결합에 의한 CNT의 성장증진 효과는 튜브상의 흑연판 핵 생성과 CNT의 성장에 필요한 임계 에너지의 감소에 의한 것이다.

• 한국결정성장학회지
• /
• 제19권4호
• /
• pp.172-183
• /
• 2009

For the effects of the nonlinear temperature profiles and reduced-gravity conditions we conduct a two-dimensional numerical modeling and simulations on the physical vapor transport processes of $Hg_2Cl_2-Xe$ system in the horizontal orientation position. Our results reveal that: (1) A decrease in aspect ratio from 5 to 2 leads to an increasingly nonuniform interfacial distribution and enhances the growth rate by one-order magnitude for normal gravity and linear wall temperature conditions. (2) Increasing the molecular weight of component B, Xenon results in a reduction in the effect of solutal convection. (3) The effect of aspect ratio affects the interfacial growth rates significantly under normal gravity condition rather than under reduced gravitational environments. (4) The transition from the convection-dominated regime to the diffusion-dominated regime ranges arises near at 0.1g$_0$ for operation conditions under consideration in this study.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.123-127
• /
• 2009

기계적 제어장치를 사용하지 않으면서도 추력방향 제어가 가능한 유체역학적 추력편향제어(Fluidic Thrust Vector Control; FTVC)기법에 대한 연구 논문이다. 2차 유동은 주 유동 흐름과 같은 방향으로 분사하였고, 선행연구를 통해 정상(steady)상태의 수치해석 결과는 실험과 비교 검증하였다. 이를 바탕으로 비정상(unsteady) 수치해석을 수행하였고, 위아래로 제트가 편향이 될 때에 소요되는 시간과 벽면에서의 압력 분포 등을 조사하여 추력벡터의 동특성을 연구하였다.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.2046-2056
• /
• 1996

The constrained melting inside an isothermally heated horizontal cylinder has been repeatedly investigated in many studies only for the moderate Rayleigh numbers. This study extends the range of Rayleigh numbers to systematically investigate the transition during melting processes, especially focusing on the complex multi-cellular flow pattern and thermal instability. The enthalpy-porosity formulation, with appropriate source terms to account for the phase change, is employed. For low Rayleigh numbers, initially developed single-cell base flow keeps the flow stable. For moderate Rayleigh numbers, even small disturbances in balance between thermal buoyance force and viscous force result in branched flow structure. For high Rayleight numbers, Benard type convection is found to develop within a narrow gap between thee wall and the unmelted solid. The marginal Rayleigh number and the corresponding wave number are in excellent agreement with those from linear stability theory.

• 한국실내디자인학회논문집
• /
• 제16권6호
• /
• pp.144-151
• /
• 2007

The idea of shopping is changed from a purchase of merchandise to an experience of pleasure. This study is a space composition analysis for the introduction of theme in multi-plex shopping center design to reflect variable consumer trend and company marketing strategy, The study progressed through theoretical consideration and substance analysis about the shopping centers which had been designed by Jerd Partnership In Japan since 2000. The following is result. The path is a sole main street that is made of curve form, parallel and vertical circulating rout and movement of human being. It leads continuity. The node and landmarks have a circular court with typifier as powerful center, character of transition space and event for experience. It makes locational quality. The districts are composed of retail shops, restaurants and culture facilities and the edge is represented by closed vertical wall and parapet. It induces a domain. The characteristic of Jerde shopping center is an experience of theme environment through the path as betweenness with a story based on a main theme. It is mostly related nature or exotic element and is obviously represented at path and node. The node takes a round shape and bring about event as a court. The application of theme to the shopping center by Jerde has a significant meaning for place marketing.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1033-1041
• /
• 2003

Two-phase flow pattern data during horizontal in-tube flow boiling are presented for pure and mixed refrigerants of R134a and Rl23, The flow pattern is observed through tubular sight glasses located at inlet and outlet of the test section, which is made of a stainless steel tube, 2m long with 10mm I.D., 1.5mm wall thickness. The obtained results are compared with the available various correlations for flow pattern. The flow pattern map of Hashizume was in good agreement with the present data except the region of low mass velocity. Weisman flow pattern map was also known to satisfactorily predict data for refrigerants in the region of annular flow. In this study, the flow pattern are simply classified into two groups; stratified(including intermittent, stratified and stratified-wavy) flow and annular flow. The transition quality from stratified to annular flow was obtained by modifying the liquid Froude number.