• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.189-201
• /
• 2017

This study focused on the Gaya mural tomb located in Goa-ri, Goryeong-gun, North Gyeongsang Province, Republic of Korea. Environmental factors such as ambient temperature, relative humidity and surface temperature, and microbial distribution on mural tombs were monitored for one year to gather data on the conservation environment of the mural tombs. The average internal temperature difference with reference to the ambient outer temperature was observed to be $11.7^{\circ}C$ for the monitoring period and the internal temperature of the tomb was found to change periodically every one or two months in response to the outer temperature. The highest temperature was observed in September and the lowest in March. The relative humidity in the mural tomb remained constant at 100%. Between December and April, condensation occurred on the ceiling of the main room of the tomb, where the murals are located. On the ceiling of the aisle, the condensation occurred throughout the year. The inside and surface wall were isolated from microorganisms, which could grow when a suitable growth environment suitable is established. Based on microbial growth temperature conditions, risk periods of microbial hazards were established, where in the period from August to October was identified as the most dangerous.

• Korean Journal of Microbiology
• /
• v.27 no.4
• /
• pp.357-365
• /
• 1989

Induction conditions for autolysis and autoplast formation of thermophilic Clostridium thermohydrosulfuricum were studied. The cells in the initial exponential growth phase were well autolysed in Tris-HCl buffer or inorganic buffers containing univalents, such as $K^{+}$ and $Na^{+}$ , and chemicals such as cysteine-HCl, sorbitol and glycerol. Meanwhile, autolysis induction was slightly inhibited by divalents, such as $Mg^{2+}, Mn^{2+}, Ca^{2+}, Ni^{2+}$, and strongly by divalents, such as $Fe^{2+}, Cu^{2+}$ and citric acid. The autolysis was stimulated when the cells were grown in the medium containing ampicillin that inhibites cell wall synthesis, meanwhile, it was slightly inhibited by nucleic acids and protein synthesis inhibitors. The optimal pH and temperature for the induction of autolysis were 7.5 and $60^{\circ}C$, respectively. On the other hand, the cells were autoplasted without lysozyme treatment during autolysis due to the stabilization of protoplasmic membrane in the presence of divalents such as $Mg^{2+}, Mn^{2+}, Ca^{2+}, Ni^{2+}$. Autoplast formation was mostly induced at $37^{\circ}C$ in 50mM Tris-HCl buffer (pH 7.5) containing 20 mM $MgCl^{2}$ and 0.3 M glycerol, and in the late exponential growth phase growing cell.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.2
• /
• pp.165-174
• /
• 1993

This work was conducted to study the use of L. acidophilus, which exists in humun intestine for the fermentation of Chinese cabbage kimchi. The changes in vitamins, the number of microflora and sensory quality were observed during fermentation after the microflora which was not related to kimchi fermentation was eliminated by treatment with ozone water or ozone gas. The growth rate of L. acidophilus in the cabbage juice was higher than that in MRS broth. The growth of L. acidophilus was slightly promoted by adding 1~2% hot pepper powder while that was inhibited by ginger and garlic. Therefore, it was shown that the regulation of fermentation was possible by addition of spices. The result of treating spice with ozone gas and ozone water 6mg/L/sec for 1 hour was that the survival ratio of total microflora was 6~20%. When L. acidophilus was added to materials after ozone treatment, the fermentation rate was improved and the polysaccharides in the cell wall were used when the usable free sugar was all consumed. The contents of vitamin B$_1$ and C in the ozone treated kimchi was higher than in the control.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.276-281
• /
• 2021

In order to manufacture a semiconductor circuit, etching, cleaning, and deposition processes are repeated. During these processes, the inside of the processing chamber is exposed to corrosive plasma. Therefore, the coating of the inner wall of the semiconductor equipment with a plasma-resistant material has been attempted to minimize the etching of the coating and particle contaminant generation. In this study, we synthesized yttrium oxyfluoride (YOF) powder by a solid-state reaction using Y₂O₃ and YF₃ as raw materials. Mixing ratio of the Y₂O₃ and YF₃ was varied from 1.0:1.0 to 1.0:1.6. Effects of the mixing ratio on crystal structure and microstructure of the synthesized YOF powder were investigated using XRD and FE-SEM. The synthesized YOF powder was successfully applied to plasma spray coating process on Al substrate.

• The Korea Journal of Herbology
• /
• v.32 no.2
• /
• pp.87-95
• /
• 2017

Objectives : Infectious diseases by Methicillin-Resistant Staphylococcus aureus (MRSA) are a growing problem worldwide. Characteristic of MRSA is endlessly mutation to resist antibiotics. Daehwanggo (DHG) is one of the oriental medicine prescriptions contained in Principles and Practice of Eastern Medicine. Daehwanggo was mainly used for external preparation from old times. The purpose of this study is to confirm possibility as supplementary drug of DHG about antibiotics through observation of synergy effect between DHG and commercial antibiotics and to observe restriction on growth of MRSA on any pathway through observation of mechanism. Methods : The minimum inhibitory concentration (MIC) of DHG against MRSA is $500{\sim}2000{\mu}g/m{\ell}$ by broth dilution method. In the checkerboard method, the combinations of DHG with antibiotics has partial synergistic effect or synergy effect and DHG markedly reduced the MICs of the antibiotics oxacillin (OX), gentamicin (GT) against MRSA. In the inhibition of resistance mechanism of DHG against MRSA, the expression of resistance gene and protein about ${\beta}-lactam$ antibiotic was reduced. Also, we observed the effect of DHG about cell membrane permeability against MRSA, and confirmed that DHG suppressed growth of strains by increasing cell membrane permeability. Results : Basis on the result, we speculate that DHG increase antibacterial activity of antibiotics against MRSA by changing the structure of cell wall of MRSA. Conclusions : These data suggest that Daehwanggo possesses possibility as supplementary drug about antibiotics against MRSA.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.81-81
• /
• 2003

The stochiometric mixture of evaporating materials for the CuGaSe$_2$ single crystal thin films were prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal CuGaSe$_2$, it was found tetragonal structure whose lattice constant no and co were 5.615$\AA$ and 11.025$\AA$, respectively. To obtains the single crystal thin films, CuGaSe$_2$ mixed crystal was deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were 61$0^{\circ}C$ and 45$0^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5${\mu}{\textrm}{m}$/h. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by pizoelectric scattering in the temperature range 30K to 150K and by polar optical scattering in the temperature range 150K to 293K. The optical energy gaps were found to be 1.68eV for CuGaSe$_2$ single crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation then the constants in the Varshni equation are given by a=9.615$\times$ 10$^{-4}$ eV/K, and $\beta$=335K. From the photocurrent spectra by illumination of polarized light of the CuGaSe$_2$ single crystal thin films. We have found that values of spin orbit coupling ΔSo and crystal field splitting ΔCr was 0.0900eV and 0.2498eV, respectively. From the PL spectra at 20K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be 0.0626eV and the dissipation energy of the acceptor-bound exciton and donor-bound exciton to be 0.0352eV, 0.0932eV, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.4
• /
• pp.153-157
• /
• 2023

In order to manufacture a semiconductor circuit, etching, cleaning, and deposition processes are repeated. During these processes, the inside of the processing chamber is exposed to corrosive plasma. Therefore, the coating of the inner wall of the semiconductor equipment with a plasma-resistant material has been attempted to minimize the etching of the coating and particle contaminant generation. In this study, we mixed AlF₃ powder with the solid-state reacted yttrium oxyfluoride (YOF) in order to increase plasma-etching resistance of the plasma spray coated YOF layer. Effects of the mixing ratio of AlF₃ with YOF powder on crystal structure, microstructure and chemical composition were investigated using XRD and FE-SEM. The plasma-etching ratios of the plasma-spray coated layers were calculated and correlation with AlF₃ mixing ratio was analyzed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.2
• /
• pp.66-72
• /
• 2024

In this study, the applicability of CCMs (Carbondioxide conversion capture materials) manufactured by reacting carbon dioxide gas with DG (Desulfurization gypsum) as a cement substitute for secondary concrete products were evaluated and the basic physical properties of CCMs-mixed mortar and concrete specimens were measured to derive the optimal mixing ratio. The main chemical oxides of CCMs were CaO and SO₃, and the main crystalline phases were CaSO₄·2H₂O, Ca(OH)₂, CaCO₃, and CaSO₄. In addition, by the results of particle size analysis and heavy metal measurement, the applicability of CCMs as a cement substitute for secondary concrete products was confirmed. As a result of measuring the strength behavior using mortar and concrete specimens with CCMs, the compressive and flexural strength decreased as the mix ratio of CCMs increased, but requirements by the standards for interlocking blocks and retaining wall blocks, which are target products in this study, were satisfied up to the optimal mixing ratio of 10 wt.% substitution. Therefore, its applicability as a cement substitute for secondary concrete products was confirmed.

• Clinical and Experimental Reproductive Medicine
• /
• v.12 no.2
• /
• pp.25-37
• /
• 1985

Four points on the basal body temperature (B.B.T.) curve was correlated with the estimated time of ovulation, as determined by serial ultrasound in 50 induced menstrual cycles from 22 subjects. The time of ovulation was estimated by measuring the maximal diameter of follicles and observing the morphologic changes within the ovary from follicle to corpus luteum. The results were as following; 1. The diameter of the follicle measured at the day before disappearance was 21.1 mm on an average (S.D.: 2.14). The average follicular growth for 4 days before ovulation was measured at a rate of 2.8 mm/day, and rapid growth of follicle was observed 3.1 mm/day at the day before. 2. The changes associated with rupture of the follicles were the followings, in order of frequency; decrease in size(94%), disappearance of follicles(64%), fluid in the Cul-de-Sac(26%) and increased internal echoes(16%). 3. Only 20 of 50 cycles, exhibited a BBT dip and correlated with the estimated time of ovulation by ultrasound in 2 of which cases(10%). BBT nadir, 30 of 50 cycles, correlated in 5(16.7%). The first day of hyperthermic plateau(FDHP) and BBT coverline was exhibited in all cycles, correlated in 41(82%) and 35(70%) cases. 4. The relationship between the diameter of dominant dominant follicle, measured by ultrasound, and the basal body temperature curve were as following. During cycles in which dip was observed on the BBT curve, the follicular diameter were 10.5${\pm}$2.12 mm on 4 days prior to the point (D-4), and 12.5${\pm}$2.12 mm (D-3), 15.5${\pm$2.12 mm (D-2), 17.0${\pm}$1.41 mm (D-1) and 21.5${\pm}$2.12 mm just prior to the dip (D-0). In the nadir; 9.6${\pm}$1.67 mm (N-4), 12.8${\pm}$1.79 mm (N-3), 16.2${\pm}$1.92 mm (N-2), 18.2${\pm}$2.17 mm (N-1) and 21.4${\pm}$2.61 mm (N-0). In the First day of Hyperthemic Plateau (FDHP); 9.8${\pm}$1.36 mm (F-4), 12.4${\pm}$1.41 mm (F-3),15.1${\pm}$1.57 mm (F-2), 18.1${\pm}$1.67 mm (F-1) and 21.2${\pm}$2.25 mm (F-0). In the BBT coverline endopint; 9.9${\pm}$.39 mm (C-4), 12.5 ${\pm}$1.44 mm (C-3), 15.2${\pm}$1.64 mm (C-2), 18.0 ${\pm}$1.69 mm (C-1), and 21.2${\pm}$2.31 mm (C-0). 5. The relationship between the ultrasonographic signs of ovulation and the basal body temperature curve were as following. The BBT dip correlated with the ovulation in 2 cases, which revealed decrease in follicular diameter (100%), fluid pattem in the Cul-de-Sac (1 case, 50%) and complete disappearance of follicle (1 case, 50%). In the nadir (5 cases); the ultrasonographic signs of ovulation were decrease in follicular diameter (5 cases, 100%), fluid pattern in the Cul-de-Sac (1 case, 20%) and complete disappearance of follicle (3 cases, 60%). In the First day of Hyperthermic Plateau (41 cases); decrease in follicular diameter (40 cases, 97.6%), fluid pattern in the Cul-de-Sac (11 cases, 26.8%), appearance of internal echo and thickening of the wall (6 cases, 14.6%) and com plete disappearance of follicle (28 cases, 68.3%). In the BBT coverline endpoint (35 cases); decrease in follicular diameter (33 cases, 94.3%), fluid pattern in the Cul-de Sac (9 cases, 25.7%), appearance of internal echo and thickening of the wall (5 cases 14.3%) and complete disappearance of follicle (20 cases, 57.1%).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.161-172
• /
• 2012

The purpose of this study is to classify, evaluate and grade the existing highway tunnels to increase landscape and natural statistics keeping the structural safety about tunnel gates area and induce the ones that will be constructed in the future by drawing the improvements and restoring the techniques as an environment-friendly. To examine the types of tunnel gate area, total 54 tunnels were investigated by selecting Gyeongbu Expressway, Yeongdong Expressway, and Jungang Expressway. Tunnel entrances and exit ports were classified as a Wall-closed type and Protruding type, which is based on tunnel gate type. Vegetation Landscape types were classified as Multilayer-Same as the surrounding landscape_(MS), Multilayer-Difference of surrounding landscape_(MD), Single layer-Same as the surrounding landscape_(SS), Single layer-Difference of surrounding landscape_(SD), and a Desolate type which based on vegetation layers and environment-friendly. Potential vegetation recovery was identified based on the structural stability and revegetation potential of the tunnel. The factors include the structural stability of the slope height and slope gradient were selected. Revegetation potential was identified as a growth potential. This factor was used in the step to classify vegetation recovery potential of a tunnel. The result, which investigated the types of tunnel entrances and exit parts has found that the most typical in 33 places was a Wall closed type with 61.1% of the total ones. The case of vegetation landscape types was created but different from the ones surrounding it with 85.2% of the total ones. It is judged that the currently constructed vegetation of tunnel entrance and exit parts had put convenience on the safety and management before landscape consideration. In addition, tunnel entrance and exit parts with excellent potential for vegetation recovery were all Protruding type. In addition, it is judged that slope stability can easily obtain growth. Therefore, entrance and exist of the highway tunnels, which will be constructed in the future, should reflect location and the result of the natural and ecological survey in design by performing it in advance and their types, which minimize the damage area range, should be applied to the local characteristics suitably. In addition, the ecologically healthy tunnel construction should be done by introducing active vegetation recovery techniques based on its safety.