• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.296-296
• /
• 2010

ICRF 시스템을 이용한 방전세정인 ICWC(Ion Cyclotron Wall Cleaning)는 ITER와 DEMO 같은 초전도 자석을 이용하는 토카막에서 토카막 shot 중간에 자장을 낮추지 않고 바로 방전 세정을 할 수 있는 방법이다. 토카막에서 방전세정은 탄소나 산소 화합물과 같은 불순물을 제거하여 방사에 의한 플라즈마 냉각을 막고 토카막 초기 start-up시 진공 챔버 벽면으로부터 의도하지 않은 연료주입을 제거하는 역할을 한다. 본 연구에서는 ICWC 방전 세정 최적화를 위해 플라즈마의 불순물 제거 특성을 수소 유량의 크기와 ICRF 펄스의 duty ratio를 바꿔가면서 관찰하였다. ICRF 전력은 44.2 MHz에서 20-50 kW 가 입사되었으며 자장은 3 T에서 고정되었다. 운전압력은 $10^{-4}$ mbar 정도이다. 헬륨의 유량을 400 sccm으로 고정한 후 수소의 유량을 40 sccm에서 160 sccm까지 증가시켜가면서 제거율을 관측하였다. 그 결과 수소 유량의 증가에 따라 제거율이 증가하는 불순물과 오히려 감소하는 불순물이 있음이 관측되었다. 제거율이 증가되는 불순물 group은 charge-to-mass ratio가 26, 28, 40, 44이고 감소하는 불순물 group은 18, 20, 32 이다. 펄스의 duty ratio를 1/9(on/off) 초에서 5/5(on/off) 초로 증가시킴에 따라 제거율이 증가하는 불순물과 감소하는 불순물이 또한 나타났는데 수소 유량 실험과 그 group에 차이가 없었다. 이러한 실험결과는 수소 유량의 증가나 펄스 길이의 증가에 따라 가스의 종류에 관계없이 모두 증가하거나 감소할 것이라는 예측과는 다른 결과로서 이것에 대한 명료한 해석이 필요하다. 왜냐하면 위와 같은 운전조건에서 효율적인 불순물 제거를 위해서는 불순물 제거 운전 방법이 불순물의 종류에 따라 모두 달라져야 하기 때문이다. 본 연구에서는 이러한 특성을 불순물의 dissociation 에너지 관점에서 해석을 시도하였다.

• Journal of the Korean Society of Visualization
• /
• v.8 no.4
• /
• pp.13-18
• /
• 2010

This paper presents an experimental study on the performance of a micro-mixer using AC electro-osmotic flow. The microchannel is made of PDMS for the side and top walls and glass patterned with ITO for the bottom wall. We first investigated the effect of the applied potential as well as the frequency on the slip velocity. We have found that the slip velocity is roughly proportional to the applied voltage in line with the Helmholtz-Smoluchowski equation and there is an optimum frequency at which the slip velocity becomes maximized. To find the optimum parameters for mixing device we tested our device for various design parameters. It turned out that the best mixing effect is obtained approximately when the electrode angle is $30^{\circ}$, electrode width $200\;{\mu}m$, and the frequency of power supply 700 Hz.

• Journal of Powder Materials
• /
• v.24 no.4
• /
• pp.275-278
• /
• 2017

In the present work, we apply a technique that has been used for the expansion of graphite to multiwall carbon nanotubes (MWCNT). The nanotubes are rapidly heated for a short duration, followed by immersion in acid solution, so that they undergo expansion. The diameter of the expanded CNTs is 5-10 times larger than that of the as-received nanotubes. This results in considerable swelling of the CNTs and opening of the tube tips, which may facilitate the accessibility of lithium ions into the inner holes and the interstices between the nanotube walls. The Li-ion storage capacity of the expanded nanotubes is measured by using the material as an anode in Li-ion cells. The result show that the discharge capacity of the expanded nanotubes in the first cycle is as high as 2,160 mAh/g, which is about 28% higher than that of the un-treated MWCNT anode. However, the charge/discharge capacity quickly drops in subsequent cycles and finally reaches equilibrium values of ~370 mAh/g. This is possibly due to the destruction of the lattice structures by repeated intercalation of Li ions.

• Nuclear Engineering and Technology
• /
• v.29 no.6
• /
• pp.459-467
• /
• 1997

The steady-state behavior of recycling neutral atoms in a tokamak edge region has been analyzed through a two-dimensional Monte Carlo simulation. A particle tracking algorithm used in earlier research on the neutral particle transport is applied to this Monte Carlo simulation in order to perform more accurate calculations with the EDGETRAN code which was previously developed for a two-dimensional edge plasma transport in the authors' laboratory. The physical model of neutral recycling includes charge-exchange and ionization interactions between plasmas and neutral atoms. The reflection processes of incident particles on the device wall are described by empirical formulas. Calculations for density, energy, and velocity distributions of neutral deuterium-tritium atoms have been carried out for a medium-sized tokamak with a double-null configuration based on the KT-2 conceptual design. The input plasma parameters such as plasma density, ion and electron temperatures, and ion fluid velocity are provided from the EDGETRAN calculations. As a result of the present numerical analysis, it is noticed that a significant drop of the neutral atom density appears in the region of high plasma density and that the similar distribution of neutral energy to that of plasma ions is present as frequently reported in other studies. Relations between edge plasma conditions and the neutral recycling behavior are discussed from the numerical results obtained herein.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.269-272
• /
• 2008

Blast load, an impulsive load with extremely short time duration with very high pressure, is effected by ground and air condition, weight of charge, shape and location of structure. In this study, a blast dynamic analysis for the air-structural integrated model considering dynamic properties of materials and simulation of complex blast wave propagation by Arbitrary Lagrangian- Eulerian technique is suggested to perform an accurate blast analysis of concrete structures. For the verification of the proposed blast analysis method, which is the air-structure integrated model using ALE technique, the comparison of analysis and experimental results is performed. The verification confirms that the simulation of realistic behavior of RC wall structures is possible using ALE method. Also, the example cases which have been analyzed using this method show that the estimation to the structural failure criterion for blast load failure can be represented by energy absorbtion procedure.

• Structural Engineering and Mechanics
• /
• v.38 no.5
• /
• pp.633-649
• /
• 2011

The paper presents a study aimed at understanding some characteristics of an interior explosion within a room with limited or no venting. The explosion may occur in ammunition storage or result from a terrorist action or from a warhead that had penetrated into this room. The study includes numerical simulations of the problem and analytical derivations. Different types of analysis (1-D, 2-D and 3-D analysis) were performed for a room with rigid walls and the results were analyzed. For the 3D problem the effect of the charge size and its location within the room was investigated and a new insight regarding the pressure distribution on the interior wall as function of these parameters has been gained. The numerical analyses were carried out using the Eulerian multi-material approach. Further, an approximate analytical formula to predict the residual internal pressure was developed. The formula is based on the conservation law of total energy and its implementation yields very good agreement with the results obtained numerically using the complete statement of the problem for a wide range of explosive weights and room sizes that is expressed through a non-dimensional parameter. This new formula is superior to existing literature recommendations and compares considerably better with the above numerical results.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.17-24
• /
• 2017

In recent digital broadcasting, up to 250 channels are multiplexed and transmitted. The channel transmission is made in the form of MPEG-2 Transport Stream (TS) and transmits one channel (Video, Audio). In order to check if many broadcast channels are transmitted normally, in multi-channel multi-view system, ability of real-time monitoring is required. In order to monitor efficient multi-channel, a distributed system in which functions and load are distributed should be implemented. In the past, we used an inefficient system that gave all of the functionality to a piece of hardware, which limited the channel acceptance and required a lot of resources. In this paper, we implemented a distributed multi-view system which can reduce resources and monitor them economically through efficient function and load balancing. It is able to implement efficient system by taking charge of decoding, resizing and encoding function in specific server and viewer function in separate server. Through this system, the system was stabilized, the investment cost was reduced by 19.7%, and the wall monitor area was reduced by 52.6%. Experimental results show that efficient real-time channel monitoring for multi-channel digital broadcasting is possible.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.50-53
• /
• 2008

Recently as the efficiency of meal area in the neighborhood facilities has decreased, the user is not satisfied about the existing meal area quality. There are problems due to crucial administration due to ineffective use of the meal area and the in-charge. So, a new meal system is coming up with one meal form at one place with time wise classification to satisfy the users and owner. In this plan, the meal area at basement 1 of Korea Advertisement Culture Hall is not just the existing meal area but in day it is a restaurant, at night a vacant hall and in the weekend it is a banquet hall. Such a premium meal area designed by developing the meal area that has different usage as per time slot is named as "M-KITCHEN" and we intend to plan in such a way. The complete "M-KITCHEN"consists largely of entrance/ exit, food distribution area, eating area, specialized restaurant, rest area, kitchen, warehouse etc. This area consists again of multimedia street entrance "M-street", food distribution area "M-kitchen", meal area "M-place", "M-plaza", "Wall pond", "Layer deck", specialized restaurant "M-china", "M-shushi", rest area "Gardening".

• Computers and Concrete
• /
• v.25 no.4
• /
• pp.327-341
• /
• 2020

Advanced forms of structural design (e.g., displacement-based methods) require knowledge of the non-linear force-displacement behavior of both the overall building and individual lateral load resisting elements, i.e., walls or building cores. Similarly, understanding the non-linear behaviour of the elements in a structure can also allow for a less conservative structural response to be calculated by better understanding the cracked (i.e., effective) properties of the various RC elements. Calculating the non-linear response of an RC section typically involves using 'black box' analysis packages, wherein the user may not be in complete control nor be aware of all the intricate settings and/or decisions behind the scenes. This paper introduces a user-friendly and transparent analysis program for predicting the back-bone force displacement behavior of slender (i.e., flexure controlled) RC walls, building cores or columns. The program has been validated and benchmarked theoretically against both commonly available and widely used analysis packages and experimentally against a database of 16 large-scale RC wall test specimens. The program, which is called WHAM, is written using Microsoft Excel spreadsheets to promote transparency and allow users to further develop or modify to suit individual requirements. The program is available free-of-charge and is intended to be used as an educational tool for structural designers, researchers or students.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.572-583
• /
• 2019

This paper aims to assess the applicability of the Runge Kutta Discontinuous Galerkin-Direct Ghost Fluid Method to the internal explosion inside a water-filled tube, which previously was studied by many researchers in separate works. Once the explosive charge located at the inner center of the water-filled tube explodes, the tube wall is subjected to an extremely high intensity fluid loading and deformed. The deformation causes a modification of the field of fluid flow in the region near the water-structure interface so that has substantial influence on the response of the structure. To connect the structure and the fluid, valid data exchanges along the interface are essential. Classical fluid structure interaction simulations usually employ a matched meshing scheme which discretizes the fluid and structure domains using a single mesh density. The computational cost of fluid structure interaction simulations is usually governed by the structure because the size of time step may be determined by the density of structure mesh. The finer mesh density, the better solution, but more expensive computational cost. To reduce such computational cost, a non-matched meshing scheme which allows for different mesh densities is employed. The coupled numerical approach of this paper has fewer difficulties in the implementation and computation, compared to gas dynamics based approach which requires complicated analytical manipulations. It can also be applied to wider compressible, inviscid fluid flow analyses often found in underwater explosion events.