• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.1-11
• /
• 2022

The heat transfer coefficient on the wall, which is used as a boundary condition in the thermal analysis of general contract-divergent supersonic nozzles, affects the thermal analysis accuracy of the entire nozzle. Accordingly, many methods of deriving a heat transfer coefficient have been proposed. In this study, the accuracy of each method was compared. For this purpose, the heat transfer coefficients were calculated through theoretical-based analogy methods, semi-empirical equations, and CFD simulations for the previously performed heat transfer experiment with an isothermal wall and compared with the experimental results. The results show that the Prandtl-Taylor analogy methods and the CFD results with the k-ω SST turbulence model were in good agreement with the experimental results. Furthermore, the Modified Bartz empirical formula showed an overall over-prediction tendency.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.5 no.4
• /
• pp.51-56
• /
• 2022

Purpose: By applying an ultrasonic mechanical device to the liquid fertilizer storage in the pig dropping treatment plant, the initial odor of the odor source is reduced, and the air dilution drainage of the complex odor is fundamentally recognized to facilitate odor treatment on the mechanical and chemical biological treatment devices at the rear. Research design, data and methodology: The odor concentration on the site boundary was measured to confirm the state of reduction. In order to prevent the spread of odor from the collection of the pig dropping treatment plant, it was measured by installing an ultrasonic generator inside the installation wall after installing the sealing wall. Results: The average value of the March and April measurement data remained close to neutral at 8.2 after 8.6 treatment before pH treatment, decreased 97.3% from 462 mg/L before SS treatment to 10.5 mg/L after treatment, and the composite odor was reduced by 85% from 20 to 3 before treatment. It was confirmed that ammonia (NH3) was reduced by 99% from 5.8 ppm to 0.09 ppm, and general bacteria were also reduced by 99% from 3,200 CFU/mL to 57 CFU/mL Conclusion: Applying the ultrasonic air ejector hybrid system and zigzag air complex module development product to resource circulation centers or sewage treatment facilities is thought to reduce inconvenience to residents due to odors caused.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.132-141
• /
• 1992

The critical condition for onset of Benard convection with variable viscosity .nu.=.nu.$_{0}$exp(-CT) has been obtained using a linear stability theory. The bottom wall is rigid while the upper surface may be either free or rigid. The two boundaries are subject to convective heat transfer. The critical Rayleigh numbers are presented up to maximum viscosity ratio of 3000. It is greater for smaller upper and/or lower surface Biot numbers. Its dependence on the viscosity ratio is complicated. However, a simple sublayer theory is found to be applicable for extremely large viscosity ratio. In such cases, the critical Rayleigh number and the critical wave number are functions of viscosity ratio and lower surface Biot number.r.

• Wind and Structures
• /
• v.30 no.5
• /
• pp.465-474
• /
• 2020

Vortex-induced vibrations of a yawed flexible cylinder near a plane boundary are numerically investigated at a Reynolds number Re_n= 500 based on normal component of freestream velocity. Free to oscillate in the in-line and cross-flow directions, the cylinder with an aspect ratio of 25 is pinned-pinned at both ends at a fixed wall-cylinder gap ratio G/D = 0.8, where D is the cylinder diameter. The cylinder yaw angle (α) is varied from 0° to 60° with an increment of 15°. The main focus is given on the influence of α on structural vibrations, flow patterns, hydrodynamic forces, and IP (Independence Principle) validity. The vortex shedding pattern, contingent on α, is parallel at α=0°, negatively-yawed at α ≤ 15° and positively-yawed at α ≥ 30°. In the negatively- and positively-yawed vortex shedding patterns, the inclination direction of the spanwise vortex rows is in the opposite and same directions of α, respectively. Both in-line and cross-flow vibration amplitudes are symmetric to the midspan, regardless of α. The RMS lift coefficient C_L,rms exhibits asymmetry along the span when α ≠ 0°, maximum C_L,rms occurring on the lower and upper halves of the cylinder for negatively- and positively-yawed vortex shedding patterns, respectively. The IP is well followed in predicting the vibration amplitudes and drag forces for α ≤ 45° while invalid in predicting lift forces for α ≥ 30°. The vortex-shedding frequency and the vibration frequency are well predicted for α = 0° - 60° examined.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.5
• /
• pp.373-380
• /
• 2014

Film flows applied to shell-and-tube heat exchangers in various industrial fields have been studied for a long time. One boundary of the film flow interfaces with a fixed wall, and the other boundary interfaces with a gaseous region. Thus, the flows become so unstable that wavy behaviors are generated on free surfaces as the film Reynolds number increases. First, high-amplitude solitary waves are detected in a low Reynolds number laminar region; then, the waves transit to a low-amplitude, high frequency ripple in a turbulent region. Film thickness is the most significant factor governing heat transfer. Since the wave accompanied in the film flow results in temporal and spatial variations in film thickness, it can be of importance for numerically predicting the film's wavy behavior. In this study, various turbulent models are applied for predicting low-amplitude ripple flows in turbulent regions. The results are compared with existing experimental results, and finally, the applied turbulent models are appraised in from the viewpoint of wavy behaviors.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.273-286
• /
• 2008

Underwater acoustic sensor array can detect acoustic signal in underwater and the sensor array can be mounted in each left, right or front side of the UUV(Unmanned Underwater Vehicle). The sensor array could be conformal array and effected turbulent boundary layer flow noise. Therefore, in this paper numerical simulations were performed to know the how the outer flow noise affect the hydrophone which embedded in the elastomer. Corcos wall pressure model was used as turbulent boundary layer flow noise and this model was applied to the frequency density function. Characteristics of transfer function according the kx wave number were simulated and design parameters were thickness of elastomer, density, and modulus of elasticity. Based on the simulation results when increasing the thickness of elastomer noise reduction was increased. This results can be applied to the design of conformal array of UUV.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.1-13
• /
• 2001

Compression, lateral, and opposite woods in the stem and branch of rimu (Dacrydium cupressinum Lamb.), a softwood species indigenous to New Zealand, were described and compared in the anatomical aspects. Qualitatively, growth rings were wide in the compression wood, intermediate in the lateral wood, and narrow in the opposite wood. Tracheid transition from early wood to late wood was very gradual in the compression wood but was more abrupt in both the lateral and opposite woods. When viewed transversely, compression wood tracheids showed a roundish outline except at the growth ring boundary but lateral and opposite wood tracheids were angular to rectangular in outline. Intercellular spaces were occasionally detected in the compression wood except in the late wood at the growth ring boundary but were absent from both the lateral and opposite woods. Slit-like extensions of the bordered pit openings caused by the location of pit apertures within short and narrow helical grooves were observed in the compression wood tracheids but not in the opposite or lateral wood tracheids. In the compression wood tracheids, fine striations in the form of fine checks or grooves were observed on the lumen surfaces and the innermost $S_3$ layer of secondary wall was absent. In the tracheids of lateral and opposite woods, the $S_3$ layer was sometimes absent but occasionally highly developed. Cross-field pits in the compression wood appeared to be piceoid due to slit-like pit apertures but those in the lateral and opposite wood tracheids showed cupressoid to taxodioid. Quantitatively, compression wood tracheids were somewhat shorter than those of opposite or lateral wood in stem but not different from the opposite or lateral wood tracheids in branch. The walls were thicker in the compression wood than in the lateral or opposite wood. Uniseriate rays in the compression wood were fewer than in the lateral or opposite wood.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.2
• /
• pp.77-85
• /
• 2000

Simulation of local external forcing and its response in the rotation table experiment has been investigated. Spatially-uniform external forcings have been applied in many experimental studies, however, based on the fact that the north-south distribution of the wind-stress curl and the existence of local maximum of the sea surface heat loss in the northern part of the East Sea, new method of combined effects of local forcings has been employed in separate experiments. Carefully designed local source or sink at the bottom of the cylindrical container can produce horizontal pressure gradient within the Ekman layer, and consequently the interior also attains the same pressure gradient that produces geostrophic interior circulation. In order to keep free surface during the local-surface cooling, a side-wall cooling method is suggested. For the various type of local forcing including the effects local cooling and the periodic change of local wind-stress curl, western-boundary flow in terms of its strength, position of separation from the boundary have been observed.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.14-26
• /
• 2001

A lot of designers are adopting a mixed imitation as techniques of cretion because cultural boundary and structure of meaning in the era of post-modernism are collapsed and dissolved. I raise up a question mark to how can genuine and creative designers can be identified at this epoch when we are today familiar with the trend of informationalization, opening and globalization. Characterisitics of multi-culturalism and compromising blending are meshed with appearance of a theory of disorganization and consumer-driven economic activity of multi-national enterprises in the age of post capitalism. Accordingly it can be said that designers are leaning upon public and consumeroriented pattern rather than pursuing a creative cultural production. With mass media in rapid advancement and public culture in father dissemination, mass production and mass re-production became a natural cultural phenomenon strengthen ing its root. Creative designers somewhat slow and limitative in pace of adaption to rapid changing society amid such social backgrounds and flooded information are coming to dead-end of wall. A mixed imitation as techniques of creation is a result of borrowing, duplicating or re-combining of existing things because the mixed imitation is equivalent to borrowing, copying, compilation and recombination of well-known artworks, motive, diverse people's cultural features, image, techniques and the likes. It is too delicate thing for one to definitely distinguish such cultural phenomenon from either one as creative work or a plagiarized work. Looking into the facts as they are, we should recognize the designers limitation in their creative works by means of the mixed imitation. thus we can have a view upon them from a criticizing standpoint against the designers creation and imitation. On the other hand, when we look at things how the mixed imitation appears in the fashion as a piece of culture, we can understand something of the contemporary designers. I try to find a significance in seeking out a method of approaching to creative fashion designers direction in future times.

• Journal of Biosystems Engineering
• /
• v.16 no.1
• /
• pp.83-89
• /
• 1991

One of the most serious problems in Korean sericulture farms is to improve the adiabatic conditions for the simple silkworm rearing houses which has been widely adapted since early 1980'. Thus, this study is aimed to solve the problems by selecting the thermal screen material and by finding the method of its instalation. For the study, 4 kinds of materials which are (1) TE005,(2) NW60, (3) NW300 and (4) AL110 are selected and 4 different types of methods which are surrounding boundary of rearing bed(type A), surrounding inside of wall and ceiling (type B), installing on inside of wal ony (type C) and installing on ceiling Inly (type D) are installed. Decision criteria of the best combination of screen material and installation methods is made by calculating the heating load coefficients and by testing the application at the simple silkworm rearing houses. The obtained results are summarized as follows ; 1. The effect of thermal screen on reducing the thermal energy is remarkable. It saves energy more 50% than unscreened simple silkworm rearing houses. 2. From a stand point of a good screed material on thermal energy reduction, the NW300, AL110 and PE005 are recommanded materials. However, NW60 and PE005 are regarded as desirable materials from the practical point view. 3. Also, the effect on thermal energy reduction is largely affected by the method of thermal screen installation. The surrounding boundary of the silkworm rearing bed(type A) is the most desirable method to reduce the energy, which saves 56.6% of it. 4. In the practical application, NW60 and type A is considered to be the best combination of material and installation method. By this combination, the level of maximum heating load can be reduced at the rate of 43% for spring season and 40% for autumn season. 5. Another heating method, comparted heating, can be recommended to save the energy.