• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.427-435
• /
• 2015

This paper provides the numerical results of a simulation of the flow around a propeller working beneath the free surface. A finite volume method is used to solve the unsteady Reynolds averaged Navier-Stokes (URANS) equations, where the wave-making problem is solved using a volume-of-fluid (VOF) method. The numerical analysis focuses on the propeller wake structure affected by the free surface, where we consider another free surface boundary condition that treats the free surface as a rigid wall surface. The propeller wake under the effect of these two free surface conditions shows a reduction in the magnitude of the longitudinal and vertical flow velocities, and its vortical structures strongly interact with the free surface. The thrust and torque coefficient under the free surface effect decrease about 3.7% and 3.1%, respectively. Finally, the present numerical results show a reasonable agreement with the available experimental data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1013-1018
• /
• 2010

This paper presents a numerical evaluation of the launch dynamics and thermo-fluid phenomena for gas generator launch eject system. The existing gas dynamic model for launching eject body used ideal gas and adiabatic assumption with empirical energy loss model. In present study, a turbulent Navier-Stokes solver with CHIMERA mesh is employed to predict the detail unsteady thermo-fluid dynamics for the launched body. The calculation results show that proper grid number is necessary for good agreement with experimental data. The important effects for accurate prediction are a gap distance and thermal boundary condition on the wall. The computational results show good agreement with experiment data.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.38-43
• /
• 2007

Owing to the rapid progress in manufacturing technology of microscale devices, there are active research works in developing microscale propulsion systems. In this study, gas flows in nozzles with size of milli and sub-millimeter are investigated by using a CFD code based on the Navier-Stokes equations. The prediction results were compared with theoretical results of quasi-one-dimensional nozzle flow and experiment data. In general, theoretical values agree very well with the CFD results. However, theoretical values begin to deviate from the CFD and experimental data for relatively small Reynolds numbers and the nozzle shape with rectangular cross section. The primary reason for this discrepancy is due to the existence of the thick boundary layer at the wall in low Reynolds flows.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.2 s.257
• /
• pp.109-115
• /
• 2007

Airframe-integrated Scramjet engines of NASA Langley type consist of a compressor, a combustion chamber and a nozzle. When some disturbances occur in one module of the engine, its influences are propagated to other modules. In this study, it is investigated numerically how shock waves were caused by thermal choking in one module propagate upstream and how they influence adjacent modules. The calculations are carried out in 2-dimensional supersonic viscous flow model using explicit TVD scheme in generalized coordinates. The adverse pressure gradient caused by heat addition brings about separation of the wall boundary layers and formation of the oblique shock wave that proceed to upstream. This moving shock wave formed one module blocks the flow coming into the adjacent modules, which makes the modules unstarted.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.3
• /
• pp.179-186
• /
• 1993

The characteristics of pressure-drop oscillations(PDO) in boiling channel are studied experimentally. The effects of initial and boundary conditions on PDO are investigated in terms of oscillation period and amplitude. The period and amplitude of PDO are increased with the increase in the compressible volume in surge tank and heat input. However the amplitude of PDO is decreased with fluid temperature under low subcooling condition. Higher initial insurge flowrate resulted in almost invariant oscillation period but lower amplitude. At higher heat input the oscillation of heater wall temperature is significant, whose period is the same as that of pressure-drop instability.

• Journal of the Korean Society for Railway
• /
• v.3 no.2
• /
• pp.43-50
• /
• 2000

The corrugated panels are the prime candidate structure for the floor, roof and wall of Korean high speed train. The equivalent continuum modeling approach panels can be used for the efficient design and evaluation of their structural characteristics. The equivalent continuum models, derived from the true complex corrugated panels, should have the same structural behavior as the original structures have. This paper briefly reviews three representative continuum modeling methods: the static analysis method and two plate-models based on modal analysis methods (MAM). These methods are evaluated through some numerical examples by comparing the natural frequencies and static deflections. It is observed that the plate-model based on Rayleigh-Ritz method seems to provide the best results when used in conjunction with the cantilever-type boundary conditions. The equivalent elastic constants of various corrugated panels, depending on the changes in their configurations, are tabulated for efficient use in structural design.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.2
• /
• pp.157-166
• /
• 1999

Numerical calculations of turbulent natural convection in an enclosure of the 20 kYA oil-immersed transformer model are presented. The transformer is modelled as two concentric cylinders with different heights and diameters. The thermal boundary layers are well represented in the temperature distributions along the wall of the transformer model. The flow stratification between the hot and cold walls can not be seen in the transformer model. The turbulence eddy viscosity has its maximum at the center of the core and its maximum values at the top of the core are larger than those at the bottom of the core.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.12 s.255
• /
• pp.1581-1587
• /
• 2006

An optimization formulation is proposed to minimize sound pressures in a two-dimensional cavity by controlling the attachment area of viscoelastic unconstrained damping materials. For the analysis of structural- acoustic systems, a hybrid approach that uses finite elements for structures and boundary elements for cavity is adopted. Four-parameter fractional derivative model is used to accurately represent dynamic characteristics of the viscoelastic materials with respect to frequency and temperature. Optimal layouts of the unconstrained damping layer on structural wall of cavity are identified according to temperatures and the amount of damping material by using a numerical search algorithm.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.337-342
• /
• 2013

이번 연구에서는 de Laval nozzle를 이용하여 다양한 유체해석 모델과 프로그램을 비교하여 그 성능을 파악하였다. de Laval nozzle은 eigenvalue에 의해 eigenvector값이 '-'와 '+'값을 동시에 갖는 물리현상을 내포하고 있으며, 압력조건에 따라 내부에서 Normal shock이 발생하게 된다. 이러한 non-linearity를 현재 우리가 주로 사용하고 있는 상용프로그램(cfx, fluent)과 EDISON, 직접 코딩한 프로그램(Matlab이용)이 얼마나 잘 표현하는지 알아보았다. 그 결과 Van Leer Vector Splitting을 이용할 경우 물리현상을 제일 잘 표현 하였다. 또한 난류 유동(Turbulence flow)을 고려하게 될 경우, Mesh가 Boundary layer를 표현할 정도로 정밀하지 못하다면 제대로 된 해석 결과를 얻을 수 없었으며, Wall 근처에서 Non-slip condition에 의해 Vortex가 형성되고, 이 Vortex가 Back flow를 유도하여 해가 수렴하는데 방해를 하게 됨을 알 수 있었다. 이를 방지하기 위해서는 유동이 잘 표현될 수 있도록 적절한 Computational environment를 형성해 주는 것이 매우 중요하다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.24-32
• /
• 1995

Tsunami generated by the 1992 Nicaragua's west coast earthquake caused 95 persons death, 155 persons injury and 3000 persons homelessness. The previous study done by Imamura et al. (1993) were on the 1992 Nicaragua tsumami generation and propagation which were simulated by using spherical far-field model and Cartesian near-field model, and the computed results with assumption of vertical wall at coast were adjusted by runup ratio to compare with observations. This study using moving boundary model hindcasts El Transito's runup height which was observed as about 6.4-9.9m.