• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.173-177
• /
• 2017

A polynaphthalenesulfonate (PNS) superplasticizer and its relation to the fluidity of cement paste (w/c = 0.35) has been investigated for three cements at a given dosage of PNS superplasticizer. Chemical properties of three cements were characterized with a XRD, XRF. The additive effects of $Na_2SO_4$ on the fresh concrete with w/c = 0.33 were also estimated by the measurement of compressive strength, slump, air content. The experimental results exhibited that the addition of sodium sulfate 2.6 % to the cement A and C improves slump loss. In case of cement E, the addition of sodium sulfate 1.3 % was effective.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2731-2738
• /
• 2015

The importance of disaster observation facilities and system are increasing around the world in order to predict and prevent water disasters, which cause serious damage to life and property. A performance test center was built to stabilize performance, compatibility, and reliability of devices, and to verify new S/W. The aim of this study is to make a guideline to build standard verifying system for hydrological observation devices by building the performance test center. In addition, efficiency of management and operation of hydrological devices can be enhanced through device analysis, maintenance, database building, and grade certificate publishment after the device test.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.487-494
• /
• 2021

Piezoelectric generators use direct piezoelectric effects that convert mechanical energy into electrical energy. Many studies were attempted to fabricate piezoelectric generators using piezoelectrics such as ZnO, PZT, PVDF. However, these various inorganic/organic piezoelectric materials are not suitable for bio-implantable devices due to problems such as brittleness, toxicity, bio-incompatibility, bio-degradation. Thus, in this paper, piezoelectric generators were prepared using a silk fibroin film which is bio-compatible by dip-coating method. The silk fibroin films are a mixed state of silk I and silk II having stable β-sheet type structures and shows the d₃₃ value of 8~10 pC/N. There was a difference in output voltages according to the thickness. The silk fibroin generators, coated 10 times and 20 times, revealed the power density of 16.07 μW/cm² and 35.31 μW/cm² using pushing tester, respectively. The silk fibroin generators are sensitive to various pressure levels, which may arise from body motions such as finger tapping, foot pressing, wrist shaking, etc. The silk fibroin piezoelectric generators with bio-compatibility shows the applicability as a low-power implantable piezoelectric generator, healthcare monitoring service, and biotherapy devices.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.102-110
• /
• 2009

In this paper, we propose an object detection method for real-time in infrared (IR) images and PowerPC (PPC) and H/W design based on field programmable gate array (FPGA). An open H/W architecture has the advantages, such as easy transplantation of HW and S/W, support of compatibility and scalability for specification of current and previous versions, common module design using standardized design, and convenience of management and maintenance. Proposed background modeling for an open H/W architecture design decreases size of search area to construct a sparse block template of search area in IR images. We also apply to compensate for motion compensation when image moves in previous and current frames of IR sensor. Separation method of background and objects apply to adaptive values through time analysis of pixel intensity. Method of clutter reduction to appear near separated objects applies to median filter. Methods of background modeling, object detection, median filter, labeling, merge in the design embedded system execute in PFC processor. Based on experimental results, proposed method showed real-time object detection through global motion compensation and background modeling in the proposed embedded system.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.41-41
• /
• 2003

텅스텐(W)은 높은 thermal stability 와 process compatibility 및 우수한 corrosion r resistance 둥으로 integrated circuit (IC)의 gate 및 interconnection 둥으로의 활용이 대두되고 있으며, 차세대 thin film transistor liquid crystal display (TFT-LCD)의 gate 및 interconnection m materials 둥으로 사용되고 았다. 그러나, 이러한 장점을 가지고 있는 팅스텐 박막이 실제 공정상에 적용되가 위해서는 건식 식각이 주로 사용되는데, 이는 wet chemical 을 이용한 습식 식각을 사용할 경우 낮은 etch rate, line width 의 감소 및 postetch residue 잔류 동의 문제가 발생하기 때문이다. 또한 W interconnection etching 을 하기 위해서는 높은 텅스텐 박막의 etch rate 과 하부 layer ( (amorphous silicon 또는 poly-SD와의 높은 etch selectivity 가 필수적 이 라 할 수 있다. 그러 나, 지금까지 연구되어온 결과에 따르면 텅스탠과 하부 layer 와의 etch selectivity 는 2 이하로 매우 낮게 관찰되고 았으며, 텅스텐의 etch rate 또한 150nm/min 이하로 낮은 값을 나타내고 있다. 따라서 본 연구에서는 halogen-based inductively coupled plasma 를 이용하여 텅스텐 박막 식각시 여러 가지 첨가 가스에 따른 높은 텅스탠 박막의 etch rate 과 하부 layer 와의 높은 etch s selectivity 를 얻고자 하였으며, 그에 따른 식각 메커니즘에 대하여 알아보고자 하였다. $CF_4/Cl_2$ gas chemistry 에 첨 가 가스로 $N_2$와 Ar을 첨 가할 경 우 텅 스텐 박막과 하부 layer 간의 etch selectivity 증가는 관찰되지 않았으며, 반면에 첨가 가스로 $O_2$를 사용할 경우, $O_2$의 첨가량이 증가함에 따라 etch s selectivity 는 계속적으로 증가렴을 관찰할 수 있었다. 이는 $O_2$ 첨가에 따라 형성되는 WOF4 에 의한 텅스텐의 etch rates 의 감소에 비하여, $Si0_2$ 등의 형성에 의한 poly-Si etch rates 이 더욱 크게 감소하였기 때문으로 사료된다. W 과 poly-Si 의 식각 특성을 이해하기 위하여 X -ray photoelectron spectroscopy (XPS)를 사용하였으며, 식각 전후의 etch depth 를 측정하기 위하여 stylus p pmfilometeT 를 이용하였다.

• The Journal of the Korea Contents Association
• /
• v.9 no.9
• /
• pp.90-96
• /
• 2009

The aim of the research is that disease database of the glycosuria and heart's blood is designed to manage the condition of the glycosuria and heart's blood patients periodically and continuously. Also we integrate patient database of existing OCS, PACS, EMR, ERP etc. and support optimal service timely that the patients want through intelligent integrated interface environment. For this, we will develop customized medical information convergence system. We construct intelligent database for disease of the glycosuria and heart's blood. And we support data integration environment for connection with existing systems - OCS, EMR, PACS etc. Also, in consideration of QoS, reliability, and expandability of customized medical information convergence system, we will design H/W, S/W, and data compatibility method.

• The Pure and Applied Mathematics
• /
• v.21 no.1
• /
• pp.23-38
• /
• 2014

In this paper, we introduce the concept of w¡compatibility and weakly commutativity for hybrid pair of mappings $F:X{\times}X{\times}X{\rightarrow}2^X$ and $g:X{\rightarrow}X$ and establish a common tripled fixed point theorem under generalized nonlinear contraction. An example is also given to validate our result. We improve, extend and generalize various known results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1597-1600
• /
• 1991

In this paper, we describe a notion of sensor modeling method in multisensor data fusion using fuzzy set theory. Each sensor module is characterized by its fuzzy constraints to specific features of environment. These sensor fuzzy constraints can be imposed on multisensory data to verify their degree of truth and compatibility toward the final decision making. In comparison with other sensor modeling methods, such as probabilistic models or rule-based models, the proposed method is very simple and can be easily implemented in intelligent robot systems.

• Structural Engineering and Mechanics
• /
• v.44 no.5
• /
• pp.601-609
• /
• 2012

Effect of different crack sizes on fracture criterion of some engineering materials was investigated in this work. Using finite element (FE) method coupled with a newly developed algorithm, J-integral values for different crack sizes were obtained for single-edge notched bend (SENB) and compact type (CT) specimen. Specimens with initial a/W ratio from 0.25 to 0.75 varying in crack size in steps of 0.125 were investigated. Several different materials, like 20MnMoNi55, 42CrMo4 and 50CrMo4, usually used in engineering structure, were investigated. For one of mentioned materials, numerical results were compared with experimental and their compatibility is visible.

• Journal of Hydrogen and New Energy
• /
• v.19 no.3
• /
• pp.182-188
• /
• 2008

In order to improve scavenging performance of free piston hydrogen fueled engine, this study estimate compatibility of uni-flow scavenging. The scavenging flow characteristics in the cylinder is investigated by flow visualization and PIV method. Consequently it has been found that the scavenging performance decreased with abnormal expansion of piston and delay of the exhaust valve opening timing. And the scavenging performance of exhaust valve located center in cylinder head is better than that of exhaust valve located side in cylinder head.