• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.31-42
• /
• 2007

The purpose of this study was to compare the stress distribution according to the splinting condition and non-splinting conditions on the finite element models of the two units implant prostheses. The finite element model was designed with the parallel placement of two fixtures ($4.0mm{\times}11.5mm$) on the mandibular 1st and 2nd molars. A cemented abutment and gold screw were used for superstructures. A FEA models assumed a state of optimal osseointegration, as the bone quality, inner cancellous bone and outer 2 mm compact bone was designed. This concluded that the cortical and trabecular bone were assumed to be perfectly bonded to the implant. Splinting condition had 2 mm contact surface and non-splinting condition had $8{\mu}m$ gap between two implant prosthesis. Two group (Splinting and non-splinting) were loaded with 200 N magnitude in vertical axis direction and were divided with subdivision group. Subdivision group was composed of three loading point; Center of central fossa, the 2 mm and 4 mm buccal offset point from the central fossa. Von Mises stress value were recorded and compared in the fixture-bone interface and bucco-lingual sections. The results were as follows; 1. In the vertical loading condition of central fossa, splinting condition had shown a different von Mises stress pattern compared to the non-splinting condition, while the maximum von Mises stress was similar. 2. Stresses around abutment screw were more concentrated in the splinting condition than the non-splinting condition. As the distance from central fossa increased, the stress concentration increased around abutment screw. 3. The magnitude of the stress in the cortical bone, fixture, abutment and gold screw were greater with the 4 mm buccal offset loading of the vertical axis than with the central loading.

• 응용통계연구
• /
• 제25권2호
• /
• pp.311-319
• /
• 2012

수명시간 분석에서 가장 간단하고 또한 자주 이용되는 분포는 지수분포이다. Koziol과 Green (1976)은 Cram$\acute{e}$r-von Mises 통계량을 Kaplan-Meier의 product limit 경험분포함수를 이용하여 임의중도절단자료에 대해서 일반화하였다. 그러나 이 통계량은 모수의 값이 주어진 단순귀무가설을 가정하고 있으므로 실제 자료에 적용하기에는 어려운 점이 있다. 본 논문에서는 척도모수가 미지인 지수분포의 적합도 검정에 모수를 추정하여 Koziol-Green 통계량을 적용하였다. 그리고 같은 방법으로, 전통적인 Kolmogorov-Smirnov 검정통계량을 일반화하고 두 가지 통계량의 검정력을 모의실험을 통하여 비교하였다. 그 결과 전반적으로 일반화된 Koziol-Green 통계량이 Kolmogorov-Smirnov 통계량보다 지수분포의 검정에 있어서는 좀 더 좋은 검정력을 보여주었다.

• Wind and Structures
• /
• 제31권4호
• /
• pp.373-380
• /
• 2020

For large-scale 5MW offshore wind turbines, the discrete equation of fluid domain and the motion equation of structural domain with geometric nonlinearity were built, the three-dimensional modeling of the blade considering fluid-structure interaction (FSI) was achieved by using Unigraphics (UG) and Geometry modules, and the numerical simulation and the analysis of the vibration characteristics for wind turbine structure under rotating effect were carried out based on ANSYS software. The results indicate that the rotating effect has an apparent effect on displacement and Von Mises stress, and the response and the distribution of displacement and Von Mises stress for the blade in direction of wingspan increase nonlinearly with the equal increase of rotational speeds. Compared with the single blade model, the blade vibration period of the whole machine model is much longer. The structural coupling effect reduces the response peak value of the blade displacement and Von Mises stress, and the increase of rotational speed enhances this coupling effect. The maximum displacement difference between two models decreases first and then increases along wingspan direction, the trend is more visible with the equal increase of rotational speed, and the boundary point with zero displacement difference moves towards the blade root. Furthermore, the Von Mises stress difference increases gradually with the increase of rotational speed and decreases nonlinearly from the blade middle to both sides. The results can provide technical reference for the safe operation and optimal design of offshore wind turbines.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권5호
• /
• pp.68-77
• /
• 2014

본 연구에서는 초박층 교면포장으로 폴리설파이드 에폭시 폴리머 콘크리트 포장을 선정하여, 에폭시 아스팔트 포장, SFRC 포장과의 비교 분석을 통해 폴리머 콘크리트 포장이 강바닥판의 피로응력범위에 어떠한 영향을 미치는 지 분석하였다. 강바닥판의 피로응력범위를 산정하기 위해 Abaqus를 사용한 유한요소해석을 사용하여 비교평가하였으며, 용접부에 교축방향 및 교축직각방향의 다축응력이 발생하는 점을 감안하여 Signed Von-Mises 응력을 도입하여 피로 검토에 활용하였다. 강바닥판의 피로응력범위를 산정하기 위해 Abaqus를 사용한 유한요소해석을 사용하여 포장 재료 및 두께에 따라 비교평가하였으며, 용접부에 교축방향 및 교축직각방향의 다축응력이 발생하는 점을 감안하여 Signed Von-Mises 응력을 도입하여 피로 검토에 활용하였다.

• 구강회복응용과학지
• /
• 제18권4호
• /
• pp.251-276
• /
• 2002

The purpose of this study was to compare and analyze the stress distribution and displacement of the fully bone anchored bridge and implant-supported overdenture in edentulous mandible on certain conditions such as number of implants, different design of superstructure. Three dimensional analysis was used and nine kinds of models designed for this study. FEM models were created using commercial software[$Rhinoceros^{(R)}$ (Ver. 1.0 Robert McNeel & Associates, USA)], and analyze using commercial software [Cosmos/$Works^{TM}$(Ver. 4.0 Structural Research & Analysis Corp., US A)]. A vertical load and $45^{\circ}$ oblique load of 17kgf were applied at the left 1st. molar. The results were as follows : (1) In the group of OVD, the displacement was reduced as increasing the number of fixture under vertical loading but there was no specific difference in Von Mises stress. Under oblique loading, the displacement was same at the vertical loading but Von Mises stress was reduced in order of OVD-3, OVD-4, OVD-2. But, bending moment reduced according to increasing the number of fixture. (2) In the group of FBAB, under vertical and oblique loading, the magnitude of Von Mises stress and displacement reduced according to increasing the number of fixtures. FBAB-4 and FBAB-5 showed similar score and distribution, but FBAB-6 showed lower value relatively. (3) In cantilever design, the maximum displacement reduced under vertical loading but increased under oblique loading. However, von mises stresses on fixtures increased under vertical and oblique loading. (4) In comparing OVD-group with FBAB-group, FBAB showed low magnitude of displacement in respect of oblique loading. However OVD-group was more stable in respect of stress distribution.

• 한국가스학회지
• /
• 제22권1호
• /
• pp.60-63
• /
• 2018

본 연구에서는 LPG 용기용 가스밸브의 강도안전성에 대한 FEM 해석결과를 제시하고 있다. FEM 해석결과에 의하면, 가스밸브가 완전히 열린 상태에서 3.5 MPa의 공급압력을 적용하였을 때, 안전밸브와 나사의 상단부사이의 경계 지역에서 발생한 von Mises 최고응력은 99.2 MPa로 나타났다. 99.2 MPa라는 von Mises 최고응력은 황동소재의 항복강도에 비해 낮은 값으로 충분히 안전한 결과이다. 이 경우에, 압력조정기의 상측 오른쪽에서는 최대 변위량 0.002mm가 발생하였다. 최대로 변형된 이 지역은 가스밸브에 설치된 오링이나 다이어프램과 같은 밀봉 부분이 아니므로 의미를 부여할 필요는 없다. 기존의 개폐식 밸브와 압력 조정기를 일체형으로 형성하여 제시한 하이브리드형의 가스밸브 모델은 LPG 용기용으로 가스누출이 없는 메커니즘과 최소로 단순화시킨 크기의 가스모델로 추천된다.

• 한국가스학회지
• /
• 제8권2호
• /
• pp.54-60
• /
• 2004

본 논문은 완전 밀폐방식의 LNG 저장탱크에서 코너 프로텍션과 2차 바닥판에 걸리는 최대 von Mises 응력과 최대 변위량을 유한요소법으로 해석하였다. LNG 저장탱크의 시운전 과정에서 질소가스로 탱크에 채워져 있는 공기를 퍼징하기 위해 코너 프로텍션에 공급할 수 있는 최대 가스압력은 1,500pa이다. 코너 프로텍션과 2차 바닥판에 공급된 가스압력 1,500pa에 의한 구조물 자체의 안전성은 대단히 높다. 그러나, 내부탱크와 같은 $9\%$ 니켈강재로 제작된 코너 프로텍션과 2차 바닥판에 8,475Pa의 높은 가스압력을 공급하면 2차 바닥판에는 833MPa의 최대 von Mises 응력이 걸리고, 1.9m의 대변형이 2차 바닥판의 중심부에서 발생하여 크게 뒤틀리며, 소성변형 또는 파괴가 일어날 수도 있다는 해석결과를 제시하고 있다.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.285-291
• /
• 2023

In this paper, in order to secure the safety and productivity of pine cone harvest, modeling and structural analysis of the hammering system for pine cone harvest drone that can easily access pine cone of Pinus koraiensis and collide with them to harvest them was performed. It calculate the equivalent stress for the structure of the hammering system and the yield strength of the applied material by applying the shear force of the stalk at which the pine cone is separated from the branch, and it is to verify the safety of the structure and propose an optimal design through appropriate factor of safety and design change. The shear force of the stalk at which the pine cone was separated from the branch was 468 N, and was applied to both ends of the hammering system. The yield strength of SS400 steel used in the hammering system is 245 ㎫, and the design change and structural analysis were performed so that the Von Mises stress could be less than 122.5 ㎫ by applying the factor of safety of 2.0 or more. As a result of the structural analysis of the frist modeling, the Von Mises stress was 220.3 ㎫, the factor of safety was 1.12, and the stress was concentrated in the screw fastening holes. As a result of the design change of the screw fastening holes, the Von Mises stress was 169.4 ㎫, the factor of safety was 1.45, and the stress was concentrated on the side part. As a result of the design change by changing screw fastening holes and adding ribs, the Von Mises stress was 121.6 ㎫, and the factor of safety was 2.02. The safety of the hammering system was secured with an optimal design with little change in mass. There was no deformation or damage as a result of experimenting on pine cone harvest by manufacturing the hammering system with an optimal design.

• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.69-78
• /
• 2007

This study was performed to compare the stress distribution pattern in the crestal cortical bone and cancellous bone using 3-dimensional finite element stress analysis when 2 different Young's modulus(high modulus, model 1; low modulus, model 2) of cancellous bone was assumed. For the analysis, a finite element model was designed to have two square-threaded implants fused together and located at first and second molar area. Stress distribution was observed when vertical load of 200N was applied at several points on the occlusal surfaces of the implants, including central fossa, points 1.5mm, 2mm, 3mm and 3.5mm buccally away from central fossa. The results were as follows; 1. In both model, the maximum Von-Mises stress in the crestal cortical bone was greater when the load was applied at the central point, points 1.5mm and 2mm buccally away from central fossa than other cases. 2. In the cortical bone around first and second molar, model 2 showed greater Von-Mises stress than model 1. It is concluded that when the occlusal contact is afforded, the distribution of stress varies depending on the density of cancellous bone and the location of loading. More favorable stress distribution is expected when the contact load is applied within the diameter of fixtures.

• Communications for Statistical Applications and Methods
• /
• 제24권5호
• /
• pp.519-531
• /
• 2017

We consider goodness-of-fit test statistics for Weibull distributions when data are randomly censored and the parameters are unknown. Koziol and Green (Biometrika, 63, 465-474, 1976) proposed the $Cram\acute{e}r$-von Mises statistic's randomly censored version for a simple hypothesis based on the Kaplan-Meier product limit of the distribution function. We apply their idea to the other statistics based on the empirical distribution function such as the Kolmogorov-Smirnov and Liao and Shimokawa (Journal of Statistical Computation and Simulation, 64, 23-48, 1999) statistics. The latter is a hybrid of the Kolmogorov-Smirnov, $Cram\acute{e}r$-von Mises, and Anderson-Darling statistics. These statistics as well as the Koziol-Green statistic are considered as test statistics for randomly censored Weibull distributions with estimated parameters. The null distributions depend on the estimation method since the test statistics are not distribution free when the parameters are estimated. Maximum likelihood estimation and the graphical plotting method with the least squares are considered for parameter estimation. A simulation study enables the Liao-Shimokawa statistic to show a relatively high power in many alternatives; however, the null distribution heavily depends on the parameter estimation. Meanwhile, the Koziol-Green statistic provides moderate power and the null distribution does not significantly change upon the parameter estimation.