• 제목/요약/키워드: volume-weighted average method

검색결과 15건 처리시간 0.023초

중앙버스전용차로가 설치된 간선도로의 서비스수준 분석방법에 관한 연구 (A Study of Level of Service Analysis Method of Arterials including Exclusive Median Bus Lanes)

  • 조한선;김태형
    • 한국도로학회논문집
    • /
    • 제15권5호
    • /
    • pp.135-144
    • /
    • 2013
  • PURPOSES : The purpose of this paper is to develop a methodology to estimate level of service of arterial including Exclusive Median Bus Lanes. METHODS : On 6 Exclusive Median Bus Lanes routes in Seoul, bus travel time and number of bus-stop per km were investigated. Also whether or not passing lane exists at bus-stop was checked. Based on the data from sites, bus travel time was estimated according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. RESULTS : A bus travel time table was developed according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. After bus travel speed and passenger car travel speed is estimated based on each travel time table and length of segment, two speeds are combined with weighted average speed using traffic volume of each lane group. Then weighted average speed is a measure of effectiveness of arterial including Exclusive Median Bus Lanes. CONCLUSIONS : It can be concluded that the proposed methodology can estimate level of service of arterial including Exclusive Median Bus Lanes considering the operation characteristics of Exclusive Median Bus Lanes.

교통량 가중평균 방법을 적용한 COSMOS 속도 추정 (Speed Estimation by Applying Volume Weighted Average Methods in COSMOS)

  • 이상수;이승환;오영태;송성주
    • 한국ITS학회 논문지
    • /
    • 제2권1호
    • /
    • pp.63-73
    • /
    • 2003
  • 국내에서 사용되는 실시간 신호제어시스템은 각 차로별로 계산된 지점속도를 산술평균 모형을 적용하여 접근로의 속도로 추정하고, 이를 대기길이 추정 모형 과정에 중요 변수로 사용한다. 본 연구에서는 현재의 산술모형의 적정성을 검토하고 하나의 대안으로서 교통량 가중평균 모형을 제시하였다. 그리고 교통량 가중평균 모형과평균 개별차랑 지점속도의 이론적 관계를 해석하고, 이를 관계식으로 표현하였다. 제시된 관계식으로부터, 가중평균 모형은 각 차로의 교통량 이용비율과 평균속도 차이에 따라 산술평균과 선형적인 차이를 갖는 것을 파악하였다. 두 가지 모형에 대한 평가를 위하여 실시간 신호제어시스템으로 운영되는 한 개 교차로로부터 자료를 수집하여 각각 적용하였다. 분석 결과, 가중평균 모형이 현재의 산술평균 모형보다 현장 상황을 합리적이고 안정적으로 나타내는 대기 행렬 추정값을 제시하였다. 따라서 가중평균 모형을 실제 운영에 적용하는 것이 실시간 신호제어시스템의 기능적 안정성에 도움을 줄 수 있다고 판단된다.

  • PDF

중첩선과 단면형상을 고려한 축류 송풍기 날개의 최적설계 (Optimization of Stacking Line and Blade Profile for Design of Axial Flow Fan Blade)

  • 압두스 사마드;이기상;정상호;김광용
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.420-423
    • /
    • 2008
  • This present work is to find optimum design of a NACA65 axial fan blade with weighted average surrogate model. The numerical analysis by Reynolds-average Navier-Stokes equations with shear stress turbulence(SST) is discretized by finite volume approximations and solved on hexahedral grids for flow analysis. The blade aerodynamic shape is modified by six design variables for the optimization. The blade profile as well as stacking line is modified to enhance blade total efficiency. Six design variables, airfoil maximum camber, maximum camber location, leading edge radius, trailing edge radius, lean angle at 50% span and lean angle at 100% span, are selected for blade profile to enhance the total efficiency. The PBA model which is basically weighted average of the basis surrogates is used to find the optimal design in the design space from the constructed response surface model for the objective function. By the optimization, the total efficiency is increased by 1.4%.

  • PDF

Lee's 메뉴엔지니어링 분석법(LME)의 적용 - 이탈리아 피자류를 중심으로 - (The Application of the Lee's Menu Engineering Method for Italian Pizzas)

  • 이성호
    • 한국식품영양학회지
    • /
    • 제33권1호
    • /
    • pp.111-115
    • /
    • 2020
  • The purpose of this study is an application of Lee's Menu Engineering (LME) method for menu analysis on the eight kinds of pizza selected from 17 kinds of pizza served by an Italian restaurant near by the Keimyung College University campus. The eliminated nine items were in the third quadrant or below the trend line. The LME method is more efficient than generally used methods such as the Miller, Kasavana & Smith, Uman, Pavesic and Merricks & Jones method. The LME method comprises reference lines and four quadrants created by x, y axes and its average values. The x and y axes comprise the sales ratio (MM%, percentage of the Menu Mix) and the weighted contribution margin (WCM%, percentage of the Weighted Contribution Margin) respectively. The obtained results are such that total sales increased by 1.59% from 58,747,200 won to 59,684,000 won, despite the decrease in sales volume. Total contribution margin also increased from 35,248,320 won to 35,810,400 won. The trend line also shows from y=0.9147x (R2=0.703) to y=0.9944x (R2=0.9893). These results indicate that the LME method is superior in practical applications.

가동물체형 구조물 해석을 위한 Simplified Immersed Boundary법의 개발 (Development of Simplified Immersed Boundary Method for Analysis of Movable Structures)

  • 이광호;김도삼
    • 한국해안·해양공학회논문집
    • /
    • 제33권3호
    • /
    • pp.93-100
    • /
    • 2021
  • 고정된 격자시스템에서 임의형상의 불투과 경계를 갖는 물체와 유체와 연성해석이 가능한 IB(Immersed Boundary)법이 개발 된 이후로 다양한 CFD 모델에서 IB법의 활용이 증가하고 있다. 기존의 IB법의 대부분은 구조물의 경계면에서 산정되는 유체력으로부터 수치적으로 경계조건을 만족시키는 directing-forcing법이나 구조물 내부에 가상셀을 위치시켜 보간을 통해 경계조건을 만족시키는 ghost-cell법들로 알고리즘이 복잡하다. 본 연구에서는 고정된 격자시스템에서 가동물체형 구조물 해석이 가능함과 더불어 3차원으로의 확장도 용이한 SIB(Simplified Immersed Boundary)법을 제안하였다. 본 연구에서 제안한 SIB법은 각 상(phase)의 밀도함수가 국소질량의 중심과 함께 이동하는 것으로 가정한 단일유체모델(one-field model for immiscible two-phase fluid)을 기초로 하였다. 또한 이동하는 고체상태의 구조물을 취급하기 위해 고체의 밀도함수를 이용한 체적가중평균법을 적용하고, 수치확산을 방지하기 위해 이류계산에는 CIP법을 적용하였다. 제안된 SIB법의 해석성능을 검토하기 위해 자유수면으로 낙하하는 물체에 대한 수치모의를 수행하였다. 수치해석결과는 자유수면으로 낙하하는 물체를 양호하게 재현하였다.

Quantitative Evaluation Method for Etch Sidewall Profile of Through-Silicon Vias (TSVs)

  • Son, Seung-Nam;Hong, Sang Jeen
    • ETRI Journal
    • /
    • 제36권4호
    • /
    • pp.617-624
    • /
    • 2014
  • Through-silicon via (TSV) technology provides much of the benefits seen in advanced packaging, such as three-dimensional integrated circuits and 3D packaging, with shorter interconnection paths for homo- and heterogeneous device integration. In TSV, a destructive cross-sectional analysis of an image from a scanning electron microscope is the most frequently used method for quality control purposes. We propose a quantitative evaluation method for TSV etch profiles whereby we consider sidewall angle, curvature profile, undercut, and scallop. A weighted sum of the four evaluated parameters, nominally total score (TS), is suggested for the numerical evaluation of an individual TSV profile. Uniformity, defined by the ratio of the standard deviation and average of the parameters that comprise TS, is suggested for the evaluation of wafer-to-wafer variation in volume manufacturing.

가중평균대리모델을 이용한 환기용 축류송풍기의 고효율 최적설계 (High-Efficiency Design of a Ventilation Axial-Flow Fan by Using Weighted Average Surrogate Models)

  • 김재우;김진혁;이찬;김광용
    • 대한기계학회논문집B
    • /
    • 제35권8호
    • /
    • pp.763-771
    • /
    • 2011
  • 본 연구에서는 환기용 축류송풍기에 대하여 효율을 목적함수로 하는 수치최적설계를 수행하였다. 유동해석은 삼차원 Reynolds-averaged Navier-Stokes(RANS) 방정식을 통하여 이뤄졌으며, 난류모델로는 Shear Stress Transport 모델을 사용하였다. 최적설계를 위한 설계변수로는 허브비, 날개의 중간 및 팁 스팬에서의 엇갈림각을 사용하였다. 실험계획법으로 라틴하이퍼큐브 샘플링 방법을 사용하여 설계영역 내에서 25개의 실험점을 추출하였다. 최적설계기법인 가중평균대리모델과 삼차원 RANS 해석을 결합하여 수치최적설계를 수행하였으며, 가중평균대리모델로는 WTA1, WTA2 및 WTA3 모델을 사용하였다. 수치 최적설계에 의해 얻어진 최적형상들의 성능을 기준형상과 비교하였으며, 성능이 가장 좋은 모델에 대하여 기준형상과의 내부유동장 비교 및 분석을 통해 성능이 향상된 원인을 규명하였다.

서울 지역에 내린 우수 pH 특성 (PH Characteristics of Precipitation in Seoul Area)

  • 이민희;에이지 히라이;모토이치 미야자키;테츠리 차지;전호
    • 환경위생공학
    • /
    • 제9권2호
    • /
    • pp.1-7
    • /
    • 1994
  • Rainwater was collected in Seoul area from January 1991 to December 1993 (over 3years) and by the analysis of the chemical components contained in rainwater, investigated the components that effect on rainwater pH Through the above studies the following conclusions were obtained. 1) Method for Averaging pH Volume weighted method is considered to be acceptable providing that precipitation is measured at the same time when the samples are taken, without precipitation data a simple averaging method should be the next choice. 2) Annual average rainwater pH was 4.98 in 1991, 4.80 in 1992, 4.67 in 1993, measurement range was 3.6-8.1. 3) In the relationship between rainwater pH and rainfall amounts rainwater pH for light rain(<15mm rainfall) was existent in the wide range(pH 4-7), but for heavy rain was corresponded to the annual average values. 4) Annual frequency of pH was Birrndat the frequency($\gamma $) between the density of the [$H^{+}$] and pH in the rainwater(over 3years ), $NO_{3}^{-}$ was excellent and the obtained results was 0.62 in 1992. Also In the correlation coefficient($\gamma $) according to the pH range $SO_{4}^{2-}, NO_{3}^{-}$, were 0.85 ,0.68 at 3.6 $Cl^-$ was 0.99(1993). At 4.1$NO_{3}^{-}(\gamma=0.48)$ in 1992, SO_4^{2-}($\gamma$=0.54), $NO_{3}^{-}(\gamma$=0.72), $Cl^- (\gamma$=0.49) in 1993. 6) pH values gradually increased with increase in $Ca^{2+}/SO_{4}^{2-}$.

  • PDF

Ecosysteme de I′Etang de Berre (Mediterranee nord-occidentale) : Caracteres Generales Physiques, Chimiques et Biologiques

  • Kim, Ki-Tai
    • 환경생물
    • /
    • 제22권2호
    • /
    • pp.247-258
    • /
    • 2004
  • Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.

분할격자체계를 이용한 천수흐름 수치모형의 개발 (Development of a Numerical Model of Shallow-Water Flow using Cut-cell System)

  • 김형준;이승오;조용식
    • 한국방재학회 논문집
    • /
    • 제8권4호
    • /
    • pp.91-100
    • /
    • 2008
  • 본 연구는 Cartesian 격자망을 기본으로 하여 복잡한 지형을 위한 격자를 간편하고 효율적으로 생성할 수 있는 기법인 분할격자체계를 제안하고자 한다. 분할격자기법은 전반적인 흐름영역의 격자는 균일한 크기의 Cartesian 격자로 표현하지만 수치모형의 정확성, 적용성 및 효율성을 증대시키기 위하여 흐름의 특성이 변하는 격자를 분할하여 처리하는 기법이다. 분할격자체계에 의한 격자망은 다양한 크기 및 형상을 지니게 되므로, 유한체적기법을 적용하여 복잡한 흐름영역을 위한 수치모형을 구성한다. HLLC Riemann 근사해법을 이용하여 지배방정식을 이산화하였으며, 수치해의 안정성을 기하기 위하여 TVD-WAF기법을 적용하였다. 분할격자체계를 이용한 수치모형을 검증하기 위하여 해석해가 존재하는 사각형수조의 자유진동흐름을 모의하였다. 해석해와 수치모의 결과를 비교하여 본 연구에서 제안된 기법이 균일격자 및 분할격자체계에서 자유수면변위 및 x-축 및 y-축 방향의 유속을 정확히 모의함을 확인하였다.