• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.840-845
• /
• 2011

Degradation products of agarose are biologically active and thus used as an ingredient in pharmaceuticals or functional cosmetics. Furthermore, it has been strongly considered as a substrate for bio-ethanol fermentation. Recently, we isolated new agarase-producing microorganism, Pseudoalteromonas sp. from south sea of Korea. In this study, we aimed to separate and purify the agarase from culture broth of this strain. Separation of agarase was performed by ion- exchange chromatography on DEAE-Sepharose resin. Equilibrium pH and volume ratio of resin to the amount of protein were optimized for the efficient adsorption of protein. 410 ${\mu}g$ of protein was completely adsorbed to 3 mL of resin at pH 7.5. The total amount of eluted protein increased as NaCl concentration increased to 400 mM at isocratic elution. Agarase was separated by linear gradient elution of NaCl (0~1,000 mM). Three major protein peaks were observed and the presence or absence of agarase in these eluted proteins was measured by Lugol's staining technique. Only six eluted protein fractions showed strong agarase activity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.2
• /
• pp.63-70
• /
• 2014

Design sensitivity analysis and topology design optimization for a piezoelectric crystal resonator are developed. The piezoelectric crystal resonator is deformed mechanically when subjected to electric charge on the electrodes, or vice versa. The Mindlin plate theory with higher-order interpolations along thickness direction is employed for analyzing the thickness-shear vibrations of the crystal resonator. Thin electrode plates are masked on the top and bottom layers of the crystal plate in order to enforce to vibrate it or detect electric signals. Although the electrode is very thin, its weight and shape could change the performance of the resonators. Thus, the design variables are the bulk material densities corresponding to the mass of masking electrode plates. An optimization problem is formulated to find the optimal topology of electrodes, maximizing the thickness-shear contribution of strain energy at the desired motion and restricting the allowable volume and area of masking plates. The necessary design gradients for the thickness-shear frequency(eigenvalue) and the corresponding mode shape(eigenvector) are computed very efficiently and accurately using the analytical design sensitivity analysis method using the eigenvector expansion concept. Through some demonstrative numerical examples, the design sensitivity analysis method is verified to be very efficient and accurate by comparing with the finite difference method. It is also observed that the optimal electrode design yields an improved mode shape and thickness-shear energy.

• Korean Journal of Veterinary Research
• /
• v.33 no.4
• /
• pp.623-632
• /
• 1993

This study was conducted to develop a sensitized latex-antigen for serodiagnosis of toxoplasmosis in animals. Tachyzoites of T gondii(RH-strain) harvested from mouse peritoneal cavity were purified through the filtraton of polycarbonate membrane(pore size, $3.0{{\mu}m}$, Costar Co.) and disrupted by ultrasonicator. The tachyzoite suspension was ultracentrifuged for 30 min at $60,000{\times}g(4{^{\circ}C})$ and the supernatant was used as a water-lysate antigen. Polystyrene latex particles of $0.8{{\mu}m}$ in diameter(Sigma) were used for the preparation of sensitized latex-antigen suspension. The several parameters including the preparation conditions, incubation buffer. serum dilution buffer and stability of agglutination reactions were evaluated and the results obtained were summarized as follows : 1. The antigen consisting of a water-lysate of T gondii tachyzoites was adsorbed onto polystyrene latex particles of $0.8{{\mu}m}$ in diameter by adding a latex suspension to an equal volume of diluted antigen solution and by incubating the mixture at $37{^{\circ}C}$ under different conditions. 2. The optimum incubation buffer used for the antigen sensitization was 0.1M Tris-HCl buffer(pH 8.0). 3. The optimum serum dilution buffer used for the latex agglutination test was 0.1M Tris-HCl-NaCl buffer(pH 7.4) containing 300 mM NaCl. But 0.1M Tris-HCl-NaCl buffer(pH 7.4) containing 300-600 mM NaCl, 0.5% BSA and 0.01% Tween-20 improved the agglutination pattems and cleared the background of microplate well without the effects on L.A titer. 4. The time required for antigen sensitization was 40 and 60 min in incubation buffer(pH 8.0) at $37{^{\circ}C}$. But the optimun time for antigen sensitization was min at $37{^{\circ}C}$. 5. The optimun quantity of antigen absorbed on latex particles for proper agglutination was the range of 20 to $32{\mu}g$ of latex particles. 6. The optimun concentration of the latex-antigen suspension for the proper agglutination reaction was determined as 0.2%(w/v). 7. The specificity, rapidity and simplicity of the latex-particle agglutination test suggested that it might be adaptable to large scale serum screening.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.556-565
• /
• 2014

In this study, we evaluated changes in physicochemical properties, total phenol and isoflavone contents, and antioxidant activity during soymilk fermentation by a potential probiotic Lactobacillus plantarum P1201. The P1201 strain showed survival rates of 58.14% and 62.22% after 4 h exposure to acid and artificial gastric acid conditions (pH 2.5), respectively. The optimal conditions for soy-yogurt fermentation by L. plantarum were determined to be as follows: temperature of $35^{\circ}C$, seed volume of 5.0%, and sucrose content of 10.0%. The total phenol and isoflavone contents and antioxidant activity were higher in soy-powder milk (SPM) yogurt than soymilk yogurt. In particular, the highest levels of isoflavone-aglycones, such as daidzein, glycitein, and genistein (91.50, 12.34, and $61.39{\mu}g/g$, respectively), were observed after 48 h of SPM fermentation. Thus, these results suggest that the soy-yogurt extract could be used as a potential source of natural antioxidants in food.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.37-44
• /
• 2019

A bond-based peridynamic model has been reported dynamic fracture characteristic of brittle materials through a simple constitutive model. In the model, each bond is assumed to be a simple spring operating independently. As a result, this simple bond interaction modeling restricts the material behavior having a fixed Poisson's ratio of 1/4 and not being capable of expressing shear deformation. We consider a state-based peridynamics as a generalized peridynamic model. Constitutive models in the state-based peridynamics are corresponding to those in continuum theory. In state-based peridynamics, thus, the response of a material particle depends collectively on deformation of all bonds connected to other particles. So, a state-based peridynamic theory can represent the volume and shear changes of the material. In this paper, the perfect plasticity is considered to express plastic deformation of material by the state-based peridynamic constitutive model with perfect plastic flow rule. The elastic-plastic behavior of the material is verified through the stress-strain curves of the flat plate example. Furthermore, we simulate the high-speed impact on 3D granite model with a nonlocal contact modeling. It is observed that the damage patterns obtained by peridynamics are similar to experimental observations.

• Advances in nano research
• /
• v.10 no.2
• /
• pp.115-128
• /
• 2021

In this article, free vibration behavior of electro-magneto-thermo sandwich Timoshenko beam made of porous core and Graphene Platelet Reinforced Composite (GPLRC) in a thermal environment is investigated. The governing equations of motion are derived by using the modified strain gradient theory for micro structures and Hamilton's principle. The magneto electro are under linear function along the thickness that contains magnetic and electric constant potentials and a cosine function. The effects of material length scale parameters, temperature change, various distributions of porous, different distributions of graphene platelets and thickness ratio on the natural frequency of Timoshenko beam are analyzed. The results show that an increase in aspect ratio, the temperature change, and the thickness of GPL leads to reduce the natural frequency; while vice versa for porous coefficient, volume fractions and length of GPL. Moreover, the effect of different size-dependent theories such as CT, MCST and MSGT on the natural frequency is investigated. It reveals that MSGT and CT have most and lowest values of natural frequency, respectively, because MSGT leads to increase the stiffness of micro Timoshenko sandwich beam by considering three material length scale parameters. It is seen that by increasing porosity coefficient, the natural frequency increases because both stiffness and mass matrices decreases, but the effect of reduction of mass matrix is more than stiffness matrix. Considering the piezo magneto-electric layers lead to enhance the stiffness of a micro beam, thus the natural frequency increases. It can be seen that with increasing of the value of WGPL, the stiffness of microbeam increases. As a result, the value of natural frequency enhances. It is shown that in hc/h = 0.7, the natural frequency for WGPL = 0.05 is 8% and 14% less than its for WGPL = 0.06 and WGPL = 0.07, respectively. The results show that with an increment in the length and width of GPLs, the natural frequency increases because the stiffness of micro structures enhances and vice versa for thickness of GPLs. It can be seen that the natural frequency for aGPL = 25 ㎛ and hc/h = 0.6 is 0.3% and 1% more than the one for aGPL = 5 ㎛ and aGPL = 1 ㎛, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.7
• /
• pp.57-65
• /
• 2011

Numerical simulations by three-dimensional Particle Flow Code($PFC^{3D}$, Itasca) considering distinct element method (DEM) were carried out for prediction of triaxial compression test with sand material. The effect of scale conditions for numerical model and distinct material on final prediction results was analyzed by numerical models under various scale conditions, and following observations were made from the numerical experiments. It is very useful to model the initial material condition without any porosity conversion from 2-D to 3-D DEM. Numerical experiments have shown that in all cases considered, 3D distinct element modeling could provide good agreement on stress-strain behavior, volume change and strength properties with laboratory testing results. It was important thing to assess reasonable scale ratio of numerical model and distinct elements for saving calculation time and securing calculation efficiency under condition with accuracy and appropriateness as numerical laboratory. As results of DEM simulations under various scale conditions, most of results show that shear strength properties as cohesion and internal friction angle are similar in condition of $D_{mod}/D_{gmax}$ < 10. It shows that 3-D distinct element method could be used as efficient tool to assess strength properties by numerical laboratory technique.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.87-97
• /
• 2008

Behaviors of cemented engineered soils, composed of rigid sand particle and soft rubber particle, are investigated under $K_o$ condition. The uncemented and cemented specimens are prepared with various sand volume fractions to estimate the effect of the cementation in mixtures. The vertical deformation and elastic wave velocities with vertical stress are measured. The bender elements and PZT sensors are used to measure elastic wave velocities. After cementation, the slope of vertical strain shows bilinear and is similar to that of uncemented specimen after decementation. Normalized vertical strains can be divided into capillary force, cementation, and decementation region. The first deflection of the shear wave in near field matches the first arrival of the primary wave. The elastic wave velocities dramatically increase due to cementation hardening under the fixed vertical stress, and are almost identical with additional stress. After decementation, the elastic wave velocities increase with increase in the vertical stress. The effect of cementation hinders the typical rubber-like, sand-like, and transition behaviors observed in uncemented specimens. Different mechanism can be expected in decementation of the rigid-soft particle mixtures due to the sand fraction. a shape change of individual particles in low sand fraction specimens; a fabric change between particles in high sand fraction specimens. This study suggests that behaviors of cemented engineered soils, composed of rigid-soft particles, are distinguished due to the cementation and decementation from those of uncemented specimens.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4A
• /
• pp.353-359
• /
• 2010

Cementitious matrix based composites are vulnerable to the drying shrinkage crack during the curing process. In this study, the drying shrinkage induced fracture behavior of the fiber reinforced concrete is simulated and the effects of the fiber reinforcement conditions on the fracture characteristics are analysed. The numerical model is composed of conduit elements and rigid-body-spring elements on the identical irregular lattice topology, where the drying shrinkage is presented by the coupling of nonmechanical-mechanical behaviors handled by those respective element types. Semi-discrete fiber elements are applied within the rigid-body-spring network to model the fiber reinforcement. The shrinkage parameters are calibrated through the KS F 2424 free drying shrinkage test simulation and comparison of the time-shrinkage strain curves. Next, the KS F 2595 restrained drying shrinkage test is simulated for various fiber volume fractions and the numerical model is verified by comparison of the crack initiating time with the previous experimental results. In addition, the drying shrinkage cracking phenomenon is analysed with change in the length and the surface shape of the fibers, the measurement of the maximum crack width in the numerical experiment indicates the judgement of the crack controlling effect.

• Journal of Korean Neurosurgical Society
• /
• v.67 no.3
• /
• pp.333-344
• /
• 2024

Objective : Markers of neuroinflammation during ischemic stroke are well characterized, but additional markers of neural damage are lacking. The study identified associations of behavioral disorders after stroke with histologic neural damage and molecular biological change. Methods : Eight-week-old, 25 g male mice of the C57BL/6J strain were subjected to middle cerebral artery occlusion (MCAO) to induce ischemic stroke. The control group was a healthy wild type (WT), and the experimental group were designed as a low severity MCAO1 and a high severity MCAO2 based on post-stroke neurological scoring. All groups underwent behavioral tests, realtime polymerase chain reaction, triphenyltetrazolium chloride (TTC) staining and Hematoxylin and Eosin staining. One-way analysis of variance was used to analyze statistical significance between groups. Results : In TTC staining, MCAO1 showed 29.02% and MCAO2 showed 38.94% infarct volume (p<0.0001). The pro-inflammatory cytokine interleukin (IL)-1β was most highly expressed in MCAO2 (WT 0.44 vs. MCAO1 2.69 vs. MCAO2 5.02, p<0.0001). From the distance to target in the Barnes maze test, WT had a distance of 178 cm, MCAO1 had a distance of 276 cm, and MCAO2 had a distance of 1051 (p=0.0015). The latency to target was 13.3 seconds for WT, 27.9 seconds for MCAO1, and 87.9 seconds for MCAO2 (p=0.0007). Prospero homeobox 1 (Prox1) was most highly expressed in MCAO2 (p=0.0004). Doublecortin (Dcx) was most highly expressed in MCAO2 (p<0.0001). Conclusion : The study demonstrated that histological damage to neural cells and changes in brain mRNA expression were associated with behavioral impairment after ischemic stroke. Prox1 and Dcx may be biomarkers of neural damage associated with long-term cognitive decline, and increased expression at the mRNA level was consistent with neural damage and long-term cognitive dysfunction.