• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.1-11
• /
• 2011

The typical truss-lattice material successively packed by repeated cubic symmetric unit cells consists of sub-elements (SE) proposed in this study. The representative continuum model for this truss-lattice material such as the effective strain and stress relationship can be formulated by the homogenization procedure based on the notation of averaged mechanical properties. The volume fractions of micro-scale struts have a significant influence on the effective strength as well as the relative density in the lattice plate with replicable unit cell structures. Most of the strength contribution in the lattice material is induced by axial stiffness under uniform stretching or compression responses. Therefore, continuum based constitutive models composed of homogenized member stiffness include these mechanical characteristics with respect to strength, internal stress state, material density based on the volume fraction and even failure modes. It can be also recognized that the stress state of micro-scale struts is directly associated with the continuum constitutive model. The plastic flow at the micro-scale stress can extend the envelope of the analytical stress function on the surface of macro-scale stress derived from homogenized constitutive equations. The main focus of this study is to investigate the basic topology of unit cell structures with the cubic symmetric system and to formulate the plastic models to predict pressure dependent macro-scale stress surface functions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.167-176
• /
• 1991

Finite element programs are developed, adopting the hyperbolic model and the Cam-clay model. In the hyperbolic model, a new model taking into account the volume change during shear is proposed and a new technique considering the density change underneath a footing is proposed. And a computing algorithm considered as more reasonable than existing one is presented. In the Cam-clay model, the deveoloped program is applied to sand, the case not recorded much, and then it is tried to analiza the behavior of sand from the viewpoint of the critical state concept. For this, the conventional CD triaxial compression tests and the footing model tests are carried out. The results are improved by 60 percent by using the modified hyperbolic model proposed. When the Cam-clay model is applied to sand, a model reflecting the overconsolidation effects and a computing algorithm accounting for the strain softening are needed. The results obtained by using the Cam-clay model are not much influenced by the value of the initial poisson's ratio, but those of the modified hyperbolic model are much influenced by that. So th values of the initial poisson's ratio must be selected deliberately in the numerical analysis.

• Korean Journal of Food Science and Technology
• /
• v.47 no.6
• /
• pp.687-697
• /
• 2015

With the shortage of edible fats and oils and depletion of fossil fuels in many countries, microbial lipids is emerging as one of the most promising sources of fats and oils in the global market. Oleaginous microorganisms, also called single cell oils (SCOs), can accumulate lipids more than 25% in the cell volume. Triacylglycerols are the major storage lipids. SCOs offer several advantages for lipid production as follows: SCOs have short life span which would shorten production time, cultivation conditions are not affected by climate and place; the production process is easy to control. There are a number of oleaginous yeasts, molds, and microalgae. Furthermore, the lipid productivity of SCOs can be enhanced through strain improvement and the optimization of cultivation conditions. The new strains developed using recent advanced biotechnical methods showed greatly improved oleaginicity. Further, hydrolysates of lignocellulosic materials can be used as carbon sources for economic production of SCO.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.758-761
• /
• 2001

In this study, the nar promoter of E. coli was characterized to see whether the nar promoter cloned onto pBBR122 can be used as an expression promoter of gram negative microbes. For this purpose, a plasmid with lacZ gene expressing ${\beta}-galactosidase$ instead of the structural genes of nar operon in a gram negative host strain(Agrobacterium.tumefaciens) was used to simplify an assay of induction of the nar promoter. The following effects were investigated to find optimal conditions: methods of inducing the nar promoter, optimal nitrate concentration, maximally inducing the nar promoter, the amount of expressed ${\beta}-galactosidase$ and induction ratio(specific ${\beta}-galactosidase$ activity after maximal induction/specific ${\beta}-galactosidase$ activity before induction). The following results were obtained from the experiments: the growth of Agrobacterium with E.coli nar promoter was not much affected by nitrate concentration in the shake-flask; induction of nar promoter was optimal when Agrobacterium was grown in the presence of 1% nitrate ion at the beginning of culture and when overnight culture was completely grown in the shake-flask before being transferred to other shake-flask; the amount of ${\beta}-galactosidase$ per cell and per medium volume was maximal when Agrobacterium was grown under aerobic condition to $OD_{600}$ of 1.7; then the nar promoter was induced under microaerobic and anaerobic condition made by lowering dissolved oxygen level(DO). After 2-3h of induction in the YEP medium selected as a main culture medium, the specific ${\beta}-galactosidase$ activity became about 17,000 Miller units in the fermentor cluture.

• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.503-509
• /
• 2011

ECC is a micro-mechanically designed cementitious composite which exhibits tightly controlled crack width and strain hardening behavior in uniaxial tension while using a moderate amount of reinforcing fiber, typically less than 2% fiber volume fraction. Recently, a variety of applications of this material ranging from repair and retrofit of structures, cast-in-place structures, to precast structural elements requiring high ductility are developed. In the present study, a retrofitting method using ECC reinforced with high strength rebar was proposed to enhance load-carrying capacity and crack control performance of deteriorated reinforced concrete (RC) beams. Six beam specimens were designed and tested under a four-point loading setup. The flexural test revealed that load-carrying capacity and crack control performance were significantly enhanced by the use of ECC and high strength rebar. This result will be useful for practical field applications of the proposed retrofitting method.

• Journal of Environmental Science International
• /
• v.6 no.2
• /
• pp.153-163
• /
• 1997

In order to fad the most fitted biodegradation model, biodegradation kinetics model to the initial phenol and p-cresot concentrations were investigated and had been fitted by the linear regression. Bacteria capable of degrading p-cresol were isolated from soil by enrichment culture technique. Among them, strain Ml capable of degradillg p.rcresol has also degraded phenal and was identified as the genus Micrococcus from the results from of taxonomical studies. The optimal tonditlons for the biodegradation of phenal and p-cresol by Micrococcus sp. Ml were $NH_4NO_3$ 0.05%, pH 7.0, 3$0^{\circ}C$, respectively, and medium volume 100m1/250m1 shaking flask. iwicrococcus sp. Ml was able to grow on phenal concentration up to 14mM and p-cresol concelltration up to 0.8mM. With increasing substrate concentraction, the lag period increased, but the maximum specific growth rates decreased. The yield coefficient decreased with increasing substrate concentation. The biodegradation kinetics of phenol and p-cresol were best described by Monod with growth model for every experimented concentration. In cultivation of mixed substrate, p-cresol was degraded first and phenol was second. This result implies that p-cresol and phenol was not degraded simultaneously.

• Applied Microscopy
• /
• v.20 no.1
• /
• pp.90-104
• /
• 1990

This study was carried out to investigate the ultrastructural changes of the proximal epiphyseal plate of the femur in young chickens that had been treated with monosodium glutamate(MSG). Eighty 1-day old broiler chickens(Hubbard strain) were divided into control and experimental groups. The experimental group received daily administration of MSG(3mg/g of body weight in 0.75% saline) per orally for 1, 3, 6, 9, 12, 15, 18 and 21 days, and were sacrificed with exanguination. The control group received an equal volume of 0.75% saline. For the transmission electron microscopy, the prehypertrophic cartilage zone of epiphyseal plate was cleaved, fixed with 2% glutaraldehyde(containing 0.2% ruthenium red), postfixed with 1 % osmium tetroxide, embedded in Epon 812, and stained with uranyl acetate and lead citrate. For the scanning electron microscopy, the calcified zone of epiphyseal plate was cleaved and coated with gold palladium. The results obtained were as follows; 1. On transmission electron microscopic examination, the sacculation decreased from 12 day to 21 day MSG administrated groups, and the vesiculation decreased in 18 and 21 day MSG administrated groups in rough endoplasmic reticulum of chondrocytes in prehypertrophic cartilage zone. The ruthenium red binding particles in pericellular rim, territorial matrix and interterritorial matrix increased from 9 day to 21 day MSG administrated groups, but the crystalloid materials decreased. 2. On scanning electron microscopic examination, the trabecular formation and calcospherites of calcification zone decreased in 18 and 21 day MSG administrated groups. The resorption cavities widened from 15 day to 21 day MSG administrated groups.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.200-205
• /
• 1998

A probiotic-strain of Lactobacillus sp. was cultured in bovine blood plasma-based (BBPB) medium and freeze-dried to prepare a probiotic product as an animal feed additive. The cell mass produced in the medium, $5.2{\times}10^9$ CFU/ml, was high enough to be commercialized and was 74% of that in MRS medium. The survival rate of tactobacillus sp. against freeze-drying was affected by the conditions for treatment of cultured BBPB broth before freeze-drying such as pH adjustment, volume reduction and freezing rate. It was also found that the blood protein hydrolysate remaining in broth also enhanced the survival rate. Among various protective substances, sucrose showed a high stabilizing effect with 10% (w/v) addition, by which the maximum survival rate (48.3%) and viable cell count ($3.0{\times}10^{10}$ CFU/g) were obtained.

• Transactions of Materials Processing
• /
• v.14 no.8 s.80
• /
• pp.681-688
• /
• 2005

The high-temperature deformation mechanisms of a ${\alpha}+{\beta}$ titanium alloy (Ti-6Al-4V), near-a titanium alloy (Ti-6.85Al-1.6V) and a single-phase a titanium alloy (Ti-7.0Al-1.5V) were deduced within the framework of inelastic-deformation theory. For this purpose, load relaxation tests were conducted on three alloys at temperatures ranging from 750 to $950^{\circ}C$. The stress-versus-strain rate curves of both alloys were well fitted with inelastic-deformation equations based on grain matrix deformation and grain-boundary sliding. The constitutive analysis revealed that the grain-boundary sliding resistance is higher in the near-${\alpha}$ alloy than in the two-phase ${\alpha}+{\beta}$ alloy due to the difficulties in relaxing stress concentrations at the triple-junction region in the near-${\alpha}$ alloy. In addition, the internal-strength parameter (${\sigma}^*$) of the near-${\alpha}$ alloy was much higher than that of the ${\alpha}+{\beta}$ alloy, thus implying that dislocation emission/ slip transfer at ${\alpha}/{\alpha}$ boundaries is more difficult than at ${\alpha}/{\beta}$ boundaries.

• Korean Journal of Materials Research
• /
• v.28 no.10
• /
• pp.539-543
• /
• 2018

We report the structural, morphological and magnetic properties of the $Ni_{70}Mn_{30}$ alloy prepared by Planetary Ball Mill method. Keeping the milling time constant for 30 h, the effect of different ball milling speeds on the synthesis and magnetic properties of the samples was thoroughly investigated. A remarkable variation in the morphology and average particle size was observed with the increase in milling speed. For the samples ball milled at 200 and 300 rpm, the average particle size and hence magnetization were decreased due to the increased lattice strain, distortion and surface effects which became prominent due to the increase in the thickness of the outer magnetically dead layer. For the samples ball milled at 400, 500 and 600 rpm however, the average particle size and hence magnetization were increased. This increased magnetization was attributed to the reduced surface area to volume ratio that ultimately led to the enhanced ferromagnetic interactions. The maximum saturation magnetization (75 emu/g at 1 T applied field) observed for the sample ball milled at 600 rpm and the low value of coercivity makes this material useful as soft magnetic material.