• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.1009-1018
• /
• 1994

An attempt is made to develop a kind of hybrid numerical method for computations of the thermal stresses during a solidification process. In this algorithm, the phase-change heat transfer analysis is perrformed by a finite volume method(FVM) and the thermal stress analysis in a solidifying body by a finite element method(FEM). The temperatures at the grid points calculated in the heat transfer analysis are transferred to those of gauss points in elements by a bi-cubic surface patch technique for the thermal stress analysis. A hyperbolic-sine constitutive law is used to prescribe the inelastic strain rate of material. Results for the unidirectional solidification process of a pure aluminum are compared with those of others and shows good agreement.

• Korean Journal of Metals and Materials
• /
• v.46 no.9
• /
• pp.572-576
• /
• 2008

Elastostatic compression tests were carried out on amorphous alloys to evaluate their energy absorption capability during homogeneous deformation at room temperature. Experiments demonstrated that a compressive stress below the global yield imposed on amorphous alloys for extended periods causes homogeneous plastic strain associated with the irreversible structural disordering. During the disordering process, free volume was created, dissipating the externally applied strain energy and the rate of creation was found to converge to a saturated value. We evaluated the capability of energy absorption of amorphous alloys during homogeneous deformation using recent theories on the evolution of the structural state.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.10
• /
• pp.1337-1350
• /
• 2023

Caproic acid is a precursor substance for the synthesis of ethyl caproate, the main flavor substance of nongxiangxing baijiu liquor. In this study, Clostridium butyricum GD1-1, a strain with high caproic acid concentration (3.86 g/l), was isolated from the storage pit mud of nongxiangxing baijiu for sequencing and analysis. The strain's genome was 3,840,048 bp in length with 4,050 open reading frames. In addition, virulence factor annotation analysis showed C. butyricum GD1-1 to be safe at the genetic level. However, the annotation results using the Kyoto Encyclopedia of Genes and Genomes Automatic Annotation Server predicted a deficiency in the strain's synthesis of alanine, methionine, and biotin. These results were confirmed by essential nutrient factor validation experiments. Furthermore, the optimized medium conditions for caproic acid concentration by strain GD1-1 were (g/l): glucose 30, NaCl 5, yeast extract 10, peptone 10, beef paste 10, sodium acetate 11, L-cysteine 0.6, biotin 0.004, starch 2, and 2.0% ethanol. The optimized fermentation conditions for caproic acid production by C. butyricum GD1-1 on a single-factor basis were: 5% inoculum volume, 35℃, pH 7, and 90% loading volume. Under optimal conditions, the caproic acid concentration of strain GD1-1 reached 5.42 g/l, which was 1.40 times higher than the initial concentration. C. butyricum GD1-1 could be further used in caproic acid production, NXXB pit mud strengthening and maintenance, and artificial pit mud preparation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.43-48
• /
• 2010

In this paper, structural analysis was conducted by designing a ultra low volume sprinkler applied to spray liquid and applying a ANSYS commercial code for three dimensional finite element method to the ultra low volume sprinkler. Based on this numerical structural analysis, stress, strain and total deformation were obtained and the structure improvement of the ultra low volume sprinkler was made along with improved productivity and shorten design period.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.438-451
• /
• 1996

This study was performed to provide basic data for design of maternity brassiere. In order to find out transformation of breast size, shape and volume properties during the period of pregnancy, direct measurements of 306 subjects using Martin's anthropometer and indirect measurements using photography were conducted. And also breast surface area, volume and assumed weight using the molding of adhisive sheet are calculated. The results are as follows; 1) Size (breast widths, depths, girths and lengths) of the breast of pregnant woman are gradually increased during pregnancy. But underbust girth is decreased after delivery. 2) Front view of the breast is gradully dropped and widened. 3) Surface area, volume were measured for each stage of pregnancy, and weights of breasts were estimated. The surface area of breast of latter stage of prgnancy was increased 1.7 times comparing with the early stage. 4) Changes of bust girth, breast depth, underbust girth, volume and estimated breast weight during pregnancy should be considered for cup size, cup shape, width and strain of strap, and width of the wings.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.4
• /
• pp.339-343
• /
• 1999

A strain of gas-producing and volume-expanding yeast was isolated from Gochujang made in Sunchang by the traditional ways and was identified to be a Saccharomyces sp. This yeast was detected only in malt among the several ingrediants of Gochujang which means that the volume-expanding yeast comes into Gochujang at the time of making products through malt one of the major ingredients. However boiling of the malt-saccharified rice could not prevent the occurrence of the volume-expanding yeast in Gochuj-ang. This yeast was contained in the range of 5.67∼7.75 log10CFU/g in products made and aged between 1 monty and 3 year in Sunchang area.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.139-142
• /
• 2002

This study presents a mathematical model predicting the stress-strain behavior of fiber reinforced (FMMCs) and fiber/particle reinforced metal matrix composites (F/P MMCs). MMCs were fabricated by squeeze casting method using Al2O3 short fiber and particle as reinforcement, and A356 aluminum alloy as matrix. The fiber/particle ratios of F/P MMCs were 2:1, 1:1, 1:2 with the total reinforcement volume fraction of 20 vol.%, and the FMMCs were reinforced with 10 vol,%, 15 vol. %, 20 vol. % of fibers. Tensile tests were conducted and compared with predictions which were derived using laminate analogy theory and multi-failure model of reinforcements. Results show that the tensile strength of FMMCs with 10 vol.% of fiber was well matched with prediction, and as the fiber volume increases, predictions become larger than experimental results. The difference between the prediction and experiment is considered to be a result of matrix allowance of fiber damage in tensile loading. As the fiber volume fraction in FMMCs increases, the fiber damage increases and so that the tensile strength is reduced. The strength of F/P MMCs approaches more closely to the prediction than FMMCs reinforced with 20 vol.% of fibers because F/P MMCs contains small quantity of fibers and thus has a positive effect in fiber strengthening.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.4
• /
• pp.171-180
• /
• 2015

The variation in microstructure and texture during continuous annealing was examined in a series of 1.6% Mn-0.1% Cr-0.3% Mo-0.005% B steels with carbon contents in the range of 0.010 to 0.030%. It was found that microstructure of hot band consisted of ferrite and pearlite as a consequence of high coiling temperature, and eutectoid carbon content was between 0.011% and 0.016%. Martensite ranged in volume fraction from 1.5% to 4.0% when annealed at $820{\circ}C$ according to the typical continuous annealing cycle. The critical martensite content for the continuous yielding was about 4% from stress-strain curves. The continuous yielding was obtained in the 0.030% carbon steel and 0.010% to 0.020% carbon steels revealed some yield point elongation ranging from 0.8% to 2.2% in as-annealed conditions. Higher tensile strength in the higher carbon steel is due to both increase in the martensite volume fraction and ferrite grain refinement. Decreasing the carbon content to 0.01% strengthened the intensities of ${\gamma}$-fiber textures, resulting in the increase in the $r_m$ value, which was caused by the lower volume fraction of martensite. The higher carbon steels showed the lower $r_m$ value of about 1.0.

• Microbiology and Biotechnology Letters
• /
• v.25 no.6
• /
• pp.580-585
• /
• 1997

We selected two mutants namely strain D5 and Nu23 by mutagenesis of anthracycline producing Streptomyces: the former is an $\varepsilon$-rhodomycinone overproducing mutant selected from Streptomyces sp. C5, a baumycin producer and the latter, a blocked mutant of early pathway for doxorubicin biosynthesis obtained from Streptomyces peucetius ATCC 27952, a doxorubicin producer. The mutant strain Nu23 does not produce anthracycline metabolites but retains the most of enzyme activities converting aklavinone to doxorubicin and the mutant strain D5 produced $\varepsilon$-rhodomycinone at a level of 150 $\mu$g/ml. These strains were grown separately in NDYE medium and each was mixed at day 3 by equal volume of culture broth but the quantity of doxorubicin produced was far below an estimation based on the level of $\varepsilon$-rhodomycinone normaly produced by the strain D5. On the other hand doxorubicin was reached at maximum level after 4 days in the mixed culture condition which was composed of culture broth of strain D5 grown for 6 day and that of strain Nu23 grown for 3 day. It was turned out that the growth of mutant strain D5 was inhibited by the accumulation of daunorubicin and doxorubicin in mixed culture broth, which cause the limitation of $\varepsilon$-rhodomycinone.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1772-1782
• /
• 1993

The characteristics of metal matrix composite under dynamic tension at high strain rates up to the order of $10^3/sec$ is studied by using newly developed apparatus. The composite material processed in this research is aluminum-alumina metal matrix composites, arid fabricated by compocasting with the fiber volume fraction from 5 to 20%. The whisker and matrix material used in this paper were ${\delta}-Al_2O_3$ and Al-6061, respectively. The mechanical tests performed in this research are low and high strain rate tensile test. At low strain-rate tensile test, the modulus of elasticity and the ultimate tensile strength of the composites were improved about 77 pct. and 55 pct., respectively comparing with the unreinforced materials. At strain-rate from $10^{-3}\;to\;10^3/s$, the effect of strain-rate on the modulus, ultimate strength, flow stress is determined. Also the effect of strain rate on the modulus, ultimate tensile strength, flow stress and elongation to failures were investigated.