• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.499-503
• /
• 2008

As the conference result of MEPC in IMO, development of ballast water management system corresponding to newly established ballast water management standard (D2 regulation) of shipping is being made an active progress over the whole world. The ballast water management system should treat particular material of more than $10{\mu}m$ in high capacity of more than 500t per hour in the event of filtration process. Also, it is very difficult to develop a practical management system since a limited element which a narrow space of the ship should be designed in the minimal volume is assumed. Therefore, the study promoted a study on the next generation auto back wash media filter to overcome such a limited element. Also, the study performed pressure and flux measurement test followed by thickness of each filter medium for filtration by each size to grasp a relation between absorption and pressure at the time of vacuum filtration and mechanical analysis and turbidity change observation of filtered water after vacuum filtration.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.303-316
• /
• 2005

Strong radar returns were observed in oyster sea farms, and coherent interferometric pairs were successfully constructed. Tide height in coastal area is possible to be measured by using interferometric phase and intensity of SAR data. This SAR application technique for measuring the tide height in the near coastal zone can be further improved when applied to double bounce dominant areas. In this paper, we investigate the characteristics of polarimetric signature in the oyster farm structures. Laboratory experiments were carried out using Ku-band according to the target scale. Radar returns from vertical poles are stronger than those from horizontal Pole by 10.5 dB. Single bounce components were as strong as double bounce components and more sensitive to antenna look direction. Double bounce components show quasi-linear relation with the height of vertical poles, which implies double bounce is more useful to determine water level than total power. A L-band NASA/IPL airborne SAR (AIRSAR) image was classified into single-, double-bounce, and volume scattering components. It is observed that oyster farms are not always characterized by double bounced scattering. Double bounce is a main scattering mechanism in oyster farms standing above seawater, while single bounce is stronger than double bounce when bottom tidal flats are exposed to air. Ratios of the normalized single to double bounce components in the former and latter cases were 0.46 and 5.62, respectively. It is necessary to use double bounce dominant sea farms for tide height measurement by DInSAR technique.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.471-483
• /
• 1994

A sodium fire facility with a test chamber of 1.7㎥ volume was constructed and operated to carry out experiments of sodium fires such as pool, spray, and columnar fires which might take place in sodium-related facilities. The experimental results of pool fires showed that the increase of temperature and pressure in the test chamber was much smaller than that of spray and columnar fires even though their amount of sodium injection in the chamber was much larger compared to other types of fires. And it was found in pool fires that the temperatures of sodium pool and the gas temperature in the test chamber had been maintained much longer than other types of fires, and that the chamber pressure had come to vacuum due to depletion of the oxygen for a large amount of sodium injection in the chamber. The experimental results of spray fires showed that sprayed sodium of small particles instantly reacted with oxygen, and that its reaction heat increased gas temperature and pressure of the test chamber rapidly and decreased them shortly. And the maximum gas temperature and pressure of the test chamber in spray fires ore greatly changed according to the inlet sodium temperature in the test chamber. The characteristics of the columnar fires were almost similar to those of spray fires, but the maximum temperature and pressure of the test chamber were much smaller even for a large amount of sodium injection. And it was shown in spray and columnar fires that the temperatures at each measurement position in the test chamber were quite different due to the instantaneous sodium oxidation in comparision with pool fires. Finally, the graphex powder was proved to be a very effective extinguisher against sodium pool fires.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.13-25
• /
• 2021

The most widely used method for determining the blast effects of explosives is the Trauzl test. This test is used to measure the explosive power (strength) of a substance by determining volume increase, which is produced by the detonation of a tested explosive charge in the cavity of a lead block with defined quality and size. In this paper, Trauzl lead block test and High speed 3D-DIC (Digital Image Correlation) system were conducted to evaluate the stemming effect of the blast hole. The effects of stemming materials can be expressed as the expansion of the cavity in a standard lead block through explosion of the explosives. The blasting experiment was conducted with emulsion explosives. The stemming material in the blast hole of lead block, which was adopted in this study, were using sand and stone chips. Results of blasting experiment and numerical analysis showed that the expansion rates of lead block were most affected by stone chips followed by sand. Also, as result of dynamic strain measurement on the lead block surface of High speed 3D-DIC system, the displacement and surface strain on the block were the highest in the experiment case of stone chips stemming.

• Journal of the Korea Convergence Society
• /
• v.12 no.9
• /
• pp.185-191
• /
• 2021

In our study, we evaluated possibility of distillation process introduction for Korean Rubus coreanus balsamic vinegar production development, has a less complicated and more rapid process leading to higher production volumes and cost savings. In order to investigate the applicability of concentrated vinegar fraction (CVF) and distilled vinegar fraction (DVF) obtained from the distillation process as balsamic and distillation vinegar, acidity, pH, and specific gravity (S.G.) were measured for the vinegar fraction obtained from the distillation process. The acidity of final CVF (60% of initial volume) obtained 4 types of vinegar (acidity; 4.42, 4.84, 5.61, and 6.35) were increased mean 38.1%, compared to initial acidities. Especially, acidity and pH of the final CVF was similar to balsamic vinegar. In addition, acidity of DVF also increased and it of the final fraction was 4.41%, 4.95%, 5.88%, and 6.72%, respectively. And it was suggested that the final DVF could be used as distilled vinegar. In this study, it was confirmed that vinegar can be effectively concentrated through the distillation process, and distilled vinegar can be produced at the same time. However, it is thought that the introduction of the distillation process can be decided only after additional biochemical characteristics such as organic acid content and antioxidant activity measurement for each vinegar fraction are analyzed.

• Journal of Oriental Neuropsychiatry
• /
• v.32 no.3
• /
• pp.185-206
• /
• 2021

Objectives: The objective of this study was to perform a systematic review and meta-analysis of pharmacopuncture treatment for insomnia disorder to derive clinical evidence and recommendation grades. Methods: Studies that verified effects of pharmacopuncture on primary insomnia were included. Characteristics and quality of included studies were assessed using Risk of Bias (RoB). Results: A total of 25 studies were selected. Pittsburgh Sleep Quality Index (PSQI) and effective rate were primarily used for outcome measurement. Vitamin B12 was the most used pharmacopuncture material. The most frequently used acupuncture point was Anmian (Ex-HN). The volume of the acupuncture solution ranged from 0.25 mL to 2 mL. Acupuncture treatment depth was 0.5 cm to 2 cm. In three studies, the procedure was performed at 16:00. Meta-analysis of studies revealed that the effective rate of the pharmacopuncture group was significantly higher than the group using sleeping pills group (RR: 1.21, 95% CI: 1.01 to 1.45, p=0.04, I²=69%). PSQI was decreased in the intervention group (MD=-2.19, 95% CI: -2.90 to -1.48, p<0.00001, I²=0%). Effective rates of pharmacopuncture and acupuncture groups were higher than that of the acupuncture group (RR: 1.11, 95% CI: 1.05 to 1.17, p=0.0002, I²=0%). PSQI was decreased in the intervention group (MD=-1.87, 95% CI: -2.36 to -1.38, p<0.00001, I²=0%). Although the effectiveness rate of the pharmacopuncture group was not significantly higher than that of the acupuncture group (RR: 1.12, 95% CI: 0.98 to 1.27, p=0.1, I²=9%), the PSQI was decreased in the pharmacopuncture group (MD=-2.10, 05% CI: -3.29 to -0.91, p=0.0005, I²=34%). The quality of clinical studies was poor. Conclusions: Based on results of this study, it is proper to use 0.5 to 2 mL of pharmacopuncture solution such as Danshen and Ciwujia with a depth of 0.5 to 2 cm at around 4 p.m. to treat insomnia disorder, focusing on Anmian (Ex-HN) and Sameumgyo (SP6).

• Journal of Korea Trade
• /
• v.25 no.7
• /
• pp.92-107
• /
• 2021

Purpose - This paper analyzes the relationship between trade facilitation and agricultural products exports and estimates the effects of trade facilitation in importing countries on Chinese agricultural products exports, which is of great significance for promoting agricultural trade between China,Japan and Korea and the governments of the three countries to formulate targeted trade facilitation policies. Design/methodology - Based on Wilson (2003) theoretical framework, this paper sets up its own trade facilitation level measurement system by involving four primary indicators and fifteen secondary indicators to evaluate the trade facilitation levels of Japan and Korea from 2011 to 2018 respectively. The paper selected the data on China's agricultural exports at the HS4 level from 2011-2018 and used a fixed-effects model to estimate the effect of changes in trade facilitation levels in trading partner countries on China's agricultural trade. Findings - Our main findings can be summarized as follows: the level of trade facilitation in importing countries has a significantly positive effect on China's agricultural exports. The higher the level of trade facilitation in trading partner countries, the more Chinese agricultural exports trade, i.e. for every 1 percentage point increase in the level of trade facilitation, the volume of exports will increase by 2.299%.The sub-sample test shows that China's main agricultural products exported to Japan and Korea, such as aquatic products, vegetables, fruits and other perishable fresh products, are particularly significantly affected by the level of trade facilitation. Originality/value - First, from the innovation of the research perspective, which is different from the analysis of the existing paper on the overall trade facilitation of all traded commodities. This article is based on the close trade relations between China, Japan and Korea, and the particularity of agricultural products, from the perspective of China's agricultural exports to Japan and Korea, discuss the impact of importing countries-Japan and Korea's trade facilitation levels on China's agricultural exports;Secondly, in this paper, the hierarchical data of the HS4 quartile is used to avoid the information loss of the industry, and to analyse the impact of the importing country's trade facilitation level on the export of different types of agricultural products more scientifically.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.322-327
• /
• 2010

Wheat is widely used in food industry because of its low price, convenience, protein-rich resource, easy processibility, and so on. However, people who have wheat-gluten allergy need gluten-free products. Especially, gluten-free products are desirable to early childhood even though they may or may not be sensitive to wheat-gluten. As the alternative of wheat flour, recently, rice flour is gaining popularity. Hence, we developed the puffed rice snack for the baby. In order to prepare for rice extrudate, 1 kg rice flour, 450 g water, and 6 g salt were mixed together and then steamed for 1 hr. The rice extrudate was shredded into pieces (0.5 cm${\times}$0.5 cm) and dried up to 4.5% moisture content. The dried rice shreds were puffed at $257^{\circ}C$ in a puffing machine. The puffed rice snack was oval-shaped having thickness of 0.5 cm, white in color with brown flakes. Appearance and texture of the puffed rice snacks were evaluated by the measurement of the texture, isothermal water absorption, expansion, and the color. Puffed rice was more porous, because rice increased up to about two times larger than its original volume. Texture of the rice puffing snack was suitable for early childhood. Rice puffing snack showed potentials including soft, low-allergenic, and easily digestible properties. It is concluded that rice puffing snack has potential in the food markets for early childhood.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.153-159
• /
• 2012

CFC-12 used in mobile air conditioning(MAC) system has been replaced by R-134a, a type of HFC refrigerant, from 1991 to 1994. R-134a has since been widely used as a refrigerant of a mobile air conditioner. However, it is one of the six main green house gases listed in Kyoto Protocol, which makes it imperative to regulate its emission and develop alternative refrigerants. In this study, the concentration of leaked R-134a was measured using VT(Variable Temperature) shed and Running loss test shed to analyze the level of air conditioner refrigerant leaked in a vehicle. According to the analysis of the concentration of R-134a leaked from a vehicle parked, annual leakage amount of R-134a was in the range of 6.46~13.28 g/yr. The figure was similar with the leakage from the mobile air conditioning system currently used. In a study using the same vehicle model, a vehicle equipped with dual evaporation system had a higher leakage rate of refrigerant than a vehicle with a single evaporation system. It appears that the added fittings and joints of the dual evaporator system led to higher leakage rate. Besides, the analysis of the change in R-134a concentration under various car speed found that more refrigerant leaked under high speed(100km/hr) and but the volume of the wind did not affect to the variation of refrigerant leakage.