• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.519-528
• /
• 2004

Most of ferrous b.c.c weld materials may experience martensitic transformation during rapid cooling after welding. And it is well known that volume expansion due to phase transformation could influence in the case of welding of high tensile strength steels on the relaxation of welding residual stress. To apply this effect practically, it is a prerequisite to establish a numerical model which is able to estimate the effect of phase transformation on residual stress relaxation quantitatively. In this study, we investigated the effect of phase transformation on the relaxation of welding residual stress through experiment. And three-dimensional thermal elastic-plastic FEM analysis is conducted to reproduce the effect of phase transformation on the relaxation of welding residual stress. Also we carried out the analysis of welding residual stress in welds of similar or dissimilar steels considering the effect of residual stress relaxation due to phase transformation.

• Journal of Trauma and Injury
• /
• v.23 no.2
• /
• pp.142-150
• /
• 2010

Purpose: In this study, patients in whom two computed tomography (CT) scans had been obtained within 24 hours of injury were analyzed to determine the incidence, risk factors and clinical significance of a progressive intracerebral hematoma (PIH). Methods: Participants were 182 patients with a traumatic intracerebral hematoma and contusion who underwent a repeat CT scan within 24 hours of injury. Univarite and multivariate statistics were used to define growth (volume increase) and to examine the relationship between the risk factors and hemorrhage expansion. Results: Fifty-four percent of the patients experienced progression in the size of the lesion in the initial 24 hours postinjury. A PIH was independently associated with worsened Glasgow coma scale (GCS) score (2.99, 1.04~8.60), the presence of subarachnoid hemorrhage (6.29, 2.48~16.00), the presence of a subdural hematoma (6.18, 2.13~17.98), the presence of an epidural hematoma (5.73, 1.18~27.76), and the presence of a basal cistern effacement (10.93, 1.19~99.57). Conclusion: For patients undergoing scanning within 2 hours of injury, the rate of PIH approaches 61%. Early repeated CT scanning is indicated in patients with a nonsurgically-treated hemorrhage revealed on the first CT scan. Worsened GCS score, significant hematoma growth and effacement of the basal cisterns on the initial CT scan are powerful predictors of which patients will require surgery. These findings should be important factors in understanding and managing of PIH.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.820-825
• /
• 1989

Yukwa (one of most popular Korean traditional popped rice snacks) was made by four different varieties of rice, Shinsun (Japonica) and Hangang $(Japonica{\times}Indica)$ which are waxy rice and Dongjin (Japonica) and Samgang $(Japonica{\times}Indica)$ which are non waxy rice, for their quality by total expansion volume, hardness and brittleness. It was notified that hydration rate of waxy and non waxy rice for preparation of Yukwa were different by 30% and 42% in moisture content respectively soaked at $12^{\circ}C$ for 12 hours and the gelatinization temperature of their starch was $64.5-67.5^{\circ}C$ with no big difference by varieties. The quality of Yukwa was deeply related with amylose contents ranging from 18.5% of non waxy rice to 2-3% of waxy rice. Superior quality (p<0.05) was got from waxy rice. Lactic acid bacterial fermentation didn't improve the quality, and soybean and rice bran oil can be used for popping in even value.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.5
• /
• pp.428-436
• /
• 2014

This study was conducted to investigate the use of sugar alcohols (sorbitol, erythritol, and xylitol) as alternative sweeteners for replacing sucrose in Yukwa (traditional Korean oil-puffed rice snack). The moisture contents of Bandegi (dried Yukwa dough) and Yukwa containing sugar alcohols were higher than that of control (containing only sucrose). The microstructures of control and Bandegi containing sugar alcohols showed uniformly and finely distributed air holes. Expansion ratio and oil absorption of Yukwa containing sorbitol and 30% erythritol were higher than those of control. Appearance and cross section of control and Yukwa containing sorbitol, 30% erythritol, and 30% xylitol showed a good shape. The lightness (L) of control was significantly lower than Yukwa containing sugar alcohols, whereas redness (a) and yellowness (b) were higher than those in Yukwa containing sugar alcohols. Hardness of Yukwa containing sugar alcohols was significantly lower than that of control, and that of Yukwa containing sorbitol was the lowest. Peak number of Yukwa containing sugar alcohols was significantly lower than that of control, and that of Yukwa containing 60% erythritol and 60% xylitol was the lowest among all samples. In the sensory evaluation, color of control was deepest, whereas that of Yukwa containing 60% xylitol was lightest. Volume and air hole uniformity of Yukwa containing 60% erythritol and 60% xylitol were inferior than those of other samples. Sweetness of Yukwa containing sugar alcohols was lower than that of control, whereas oily flavor was stronger. Hardness of Yukwa containing sugar alcohols was lower than that of control, and Yukwa containing xylitol showed the lowest hardness among the samples. Crispness of Yukwa containing sugar alcohols was lower than that of control. There were no significant differences in overall acceptability between control and Yukwa containing 30% sorbitol and 30% erythritol. Overall, sorbitol and erythritol were appropriate as a 30% replacement for sucrose when preparing Yukwa.

• Korean journal of food and cookery science
• /
• v.18 no.1
• /
• pp.30-33
• /
• 2002

The quality of an angel food cake prepared with albumen of irradiated eggs was investigated. Fresh shell eggs were irradiated at various doses up to 3 kGy. Egg white from irradiated eggs decreased the specific gravity and increased the pH of cake batter. The specific volume and expansion ratio of the cake increased by the use of albumen from irradiated eggs. Egg white from irradiated eggs made the crust color of cake darker, more reddish and yellowish. The textural characteristics of the cake were also affected by irradiation. Irradiation caused a decrease in hardness, gumminess and brittleness and an increase in cohesiveness and springiness. Overall, egg white from irradiated eggs apeared to make an angel food cake softer than that of non-irradiated egg white.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.154-163
• /
• 2009

The groutability depends on the properties of the grout, its injection processes, and on the mechanical properties of the soil formation. During the process of pouring cement-based grouting into a porous medium, a variation with time occurs in the viscosity of grout suspension. In addition the particle filtration phenomenon will limit the expansion of the grouted zone because cement particles are progressively stagnant within the soil matrix. In this paper, a closed-form solution was derived by implementing the mass balance equations and the generalized phenomenological filtration law, which can be used to evaluate the deposition of cement-based grout in the soil matrix. The closed-form solution relevant to a particular spherical flow was modified by a step-wise numerical calculation, considering the variable viscosity caused by a chemical reaction, and the decrease in porosity resulting from grout particle deposition in the soil pores. A series of pilot-scale chamber injection tests was performed to verify that the developed step-wise numerical calculation is able to evaluate the injectable volume of grout and the deposition of grout particles. The results of the chamber injection tests concurred well with that of the step-wise numerical calculation. Based on the filtration phenomenon, a new groutability criterion of cement-based grout in a porous medium was proposed, which might facilitate a new insight in the design of the grouting process.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.3
• /
• pp.325-331
• /
• 2002

Postpneumonectomy syndrome is a rare complication that usually occurs in younger patients within the first year after a right total lung resection. Its clinical presentations are stridor, dyspnea, and recurrent pulmonary infections. An airway obstruction secondary to the extreme mediastinal shift and ratation after a pneumonectomy is the main mechanism. It is commonly complicated with tracheobronchomalacia due to longstanding airway compression. The management modalities involve a repositioning of the mediastinum with volume expansion of the pneumonectomy site by a expandable prosthesis. however, other methods including an endobronchial stent insertion should be considered in the presence of a tracheobronchomalacia or in poor surgical candidates. Here we describe a case of postpneumonectomy syndrome complicated by a bronchomalacia, which was successfully treated with a self-expandable endobronchal stent.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.17 no.3
• /
• pp.163-181
• /
• 2017

In the field of orofacial surgery, a red blood cell transfusion (RBCT) is occasionally required during double jaw and oral cancer surgery. However, the question remains whether the effect of RBCT during the perioperative period is beneficial or harmful. The answer to this question remains challenging. In the field of orofacial surgery, transfusion is performed for the purpose of oxygen transfer to hypoxic tissues and plasma volume expansion when there is bleeding. However, there are various risks, such as infectious complications (viral and bacterial), transfusion-related acute lung injury, ABO and non-ABO associated hemolytic transfusion reactions, febrile non-hemolytic transfusion reactions, transfusion associated graft-versus-host disease, transfusion associated circulatory overload, and hypersensitivity transfusion reaction including anaphylaxis and transfusion-related immune-modulation. Many studies and guidelines have suggested RBCT is considered when hemoglobin levels recorded are 7 g/dL for general patients and 8-9 g/dL for patients with cardiovascular disease or hemodynamically unstable patients. However, RBCT is occasionally an essential treatment during surgeries and it is often required in emergency cases. We need to comprehensively consider postoperative bleeding, different clinical situations, the level of intra- and postoperative patient monitoring, and various problems that may arise from a transfusion, in the perspective of patient safety. Since orofacial surgery has an especially high risk of bleeding due to the complex structures involved and the extensive vascular distribution, measures to prevent bleeding should be taken and the conditions for a transfusion should be optimized and appropriate in order to promote patient safety.

• Journal of the Korean Ceramic Society
• /
• v.32 no.11
• /
• pp.1269-1275
• /
• 1995

Effects of GeO2 addition on the thermal and structural stabilities of PbO-Bi2O3-Ga2O3 glasses were studied. Thermal stabilities, as assessed by the weighted thermal stability factors [(Tx-Tg)/Tg], increased with GeO2 concentraton from 0.097 to 0.210 with the addition of 20 mol% GeO2. Increasing GeO2 content resulted in the decrease of apparent density, molar volume, refractive index and thermal expansion. On the other hand, IR transmission cut-off (λT=50%) moved from 6.73${\mu}{\textrm}{m}$ for the ternary PbO-Bi2O3-Ga2O3 glass to shorter wavelength side, 5.98${\mu}{\textrm}{m}$ for a glass containing 20mol% GeO2. There were little change with GeO2 content, however, in the activation energies for the viscous flow of approximately 140 kcal/mole within the temperature interval of 300~50$0^{\circ}C$. Addition of GeO2 to PbO-Bi2O3-Ga2O3 glasses enhanced the thermal and structural stabilities significantly at the expense of their infrared transmittance. An appropriate compsomise between these two opposite trends should be made following the specifications of the final applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.499-499
• /
• 2011

Silicon nanowires (Si NWs) have been extensively studied for nanoelectronics owing to their unique optical and electrical properties different from those of bulk silicon. For the development of Si NW devices, better understanding of oxidation behavior in Si NWs would be an important issue. For example, it is widely known that atomic scale roughness at the dielectric (SiOx)/channel (Si) interface can significantly affect the device performance in the nano-scale devices. However, the oxidation process at the atomic-scale is still unknown because of its complexity. In the present work, we investigated the oxidation behavior of Si NW in atomic scale by simulating the dry oxidation process using a reactive molecular dynamics simulation technique. We focused on the residual stress evolution during oxidation to understand the stress effect on oxidation behavior of Si NWs having two different diameters, 5 nm and 10 nm. We calculated the charge distribution according to the oxidation time for 5 and 10 nm Si NWs. Judging from this data, it was observed that the surface oxide layer started to form before it is fully oxidized, i.e., the active diffusion of oxygen in the surface oxide layer. However, it is well-known that the oxide layer formation on the Si NWs results in a compressive stress on the surface which may retard the oxygen diffusion. We focused on the stress evolution of Si NWs during the oxidation process. Since the surface oxidation results in the volume expansion of the outer shell, it shows a compressive stress along the oxide layer. Interestingly, the stress for the 10 nm Si NW exhibits larger compressive stress than that of 5 nm Si NW. The difference of stress level between 5 an 10 anm Si NWs is approximately 1 or 2 GPa. Consequently, the diameter of Si NWs could be a significant factor to determine the self-limiting oxidation behavior of Si NWs when the diameter was very small.