• 설비공학논문집
• /
• 제14권4호
• /
• pp.293-303
• /
• 2002

For successful design of component, performances of one-tank plate type evaporator, gas-liquid separation type condenser, swash plate type compressor and thermostatic expansion valve for automotive air conditioner are investigated experimentally. Heat transfer characteristics in the evaporator are examined by means of air temperature, relative humidity, air volume flow, outlet refrigerant pressure and superheat, and heat transfer characteristics in the condenser are examined by means of air temperature, air velocity and inlet refrigerant pressure. Pressure drops for both evaporator and condenser are measured arid empirical correlations are derived. Volumetric efficiencies and isentropic efficiencies for trio types of compressors with different capacity are measured and compared. Thermostatic expansion valve is tested to investigate the pressure variation according to temperature changes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.301-304
• /
• 2001

This paper considers the research of the hybrid interrupter which adopts both rotating arc and thermal expansion technology. The operating principle of this device defends on rapid arc rotation due to the magnetic field created by the fault current through a coil which is mounted on contacts and also relies on the principle of thermal expansion created by arc energy in extinguishing chamber and finally causes pressure rise in expansion volume. In this research, the principle of the interrupting techniques are given and experimental results of hybrid interrupter which is developed by new technology is introduced.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1083-1090
• /
• 2004

Two noise reduction systems are proposed in order to overcome the geometric restriction of the reactive muffler such as an expansion chamber. First, membrane is installed as a part of a duct wall and an air cavity is covered outside membrane. Second, membrane is installed inside a duct, which gives no volume change of the duct. Structural-acoustic coupling between membrane and fluid inside the cavity and duct causes rapid impedance mismatching and thereby reflected wave. Theoretical prediction is conducted by using modal expansion approach. The results are compared with the experimental results, which show better noise reduction performance than an expansion chamber.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.474-479
• /
• 2004

Two noise reduction systems are proposed in order to overcome the geometric restriction of the reactive muffler such as an expansion chamber. First, membrane is installed as a part of a duct wall and an air cavity is covered outside membrane. Second, membrane is installed inside a duct, which gives no volume change of the duct. Structural-acoustic coupling between membrane and fluid inside the cavity and duct causes rapid impedance mismatching and thereby reflected wave. Theoretical prediction is conducted by using modal expansion approach. The results are compared with the experimental results, which show better noise reduction performance than an expansion chamber.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.44-46
• /
• 2001

This paper describes the use of the PHOENICS CFD package for the simulation of the high-current period of the arcing process in a hybrid rotating arc/auto expansion by interrupter. The operating principle of this device depends on rapid arc rotation due to the magnetic field created by the fault current through a coil which is mounted on contacts and also relies on the principle of thermal expansion created by arc energy in extinguishing chamber and finally causes pressure rise in expansion volume. This paper is divided into three main sections. The first gives a brief overview of the interrupter. The second section gives a full description of the methods used in the calculation. The final section presents some sample results for the hybrid interrupter.

• 자원환경지질
• /
• 제18권2호
• /
• pp.159-166
• /
• 1985

Multipole 확장에 의한 중력이상의 계산식이 유도되고, 직각 prism과 원기둥 모양의 물체에 대하여 중력을 계산하며 정확한 계산과 비교 연구를 한다. 근거리에 있는 source의 multipole확장은 표면적분보다 체적적분이 더 좋은 근사치를 얻게한다. 그렇지만 지구물리탐사의 실제에 있어 흔히 나타나는 원거리의 source에 대해서는 이 두 접근 방법은 서로 일치하게 됨을 알 수 있다.

• 소성∙가공
• /
• 제8권3호
• /
• pp.247-247
• /
• 1999

The segregation (distribution) of nickel and the composition of its constituents influence the low thermal expansion characteristics (Invar effect) in Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy. The change of coefficient of the thermal expansion and magnetic properties were studied as an aspect of carbon addition causing the segregation of Ni in primary austenite of as-cast Fe-30 wt.% Ni-12.5 wt.% Co Invar alloy. The coefficient of thermal expansion of Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy showed its lowest value at 0.08 wt.% carbon, increased with increasing carbon content in the range of 0.08-1.0 wt.%C, kept constant at 1.0-2.0 wt.%C and decreased at carbon higher than 2.0 wt.%. The effective distribution of the coefficient of nickel in as-cast Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy increased with increasing carbon content. The volume fraction of they phase of Fe-30 wt.% Ni-12.5 wt.% Co-xC alloy increased with increasing carbon content. The microstructure of Fe-30 wt.% Ni-12.5 wt.% Co-xC alloy changed with the carbon content was independent of the coefficient of thermal expansion. The Curie temperature changed linearly with the carbon content and was similar to the change of the coefficient of thermal expansion. Moreover, the coefficient of thermal expansion decreased when the ratio of saturation magnetization to Curie temperature ($\sigma_s/T_c$) increased, decreasing the Curie temperature and showed a specific relationship with the magnetic properties of the Fe-30 wt.% Ni-12.5 wt.% Co-xCInvar alloy.

• 한국의상디자인학회지
• /
• 제25권3호
• /
• pp.165-184
• /
• 2023

The purpose of this study is to analyze the expanded characteristics that can be found in the fashion designs of JUUN. J. For the study, the concept and discourse related to theme expansion have been theoretically reviewed, and various types of expansive characteristics were derived by reviewing prior research related to the keyword expanded characteristics. Photo data required for the analysis were collected through the official website of JUUN. J and Vogue, a worldwide fashion magazine. The scope of the survey was limited to 983 photographs collected from 28 collections from 2009 S/S through 2022 F/W. The results are as follows. First, the expansion of the human body, which is achieved by adding an empty space between the body and the clothing or using various materials to express the volume of the body, is expressed through two different forms in the designs of JUUN. J. Second, the expansion of time expresses the combination of different timelines, the meeting of the past and present or awe toward the unpredictable future. Third, the expansion of style, which is expressed by reinterpreting existing costumes or styles, is a type of expansion' that appears individually in the fashion designs of JUUN J. Such expansion of style can be found in the military inspired designs. Fourth, the expansion of space, which diversifies our perception of space by re-recognizing the concept of space, was implemented into the works and designs of JUUN. J through the convergence of different cultural aspects. Fifth, the expansion of gender, which is expressed through the continuous exploration of the borders of gender and the delivery of social messages, has appeared in the works of JUUN J. in the form of genderless design.

• Composites Research
• /
• 제28권6호
• /
• pp.340-347
• /
• 2015

VARTM 공정에서 고분자 수지가 함침 될 때 시간에 따라 섬유보강재가 팽창하여 섬유체적율이 감소하는 현상이 발생한다. 풍력 블레이드와 같은 대형 복합재료 구조물의 경우 섬유체적율의 변동 폭이 커져 제품의 치수가 변하고 기계적 물성이 저하될 뿐 아니라 예측하지 못한 고분자 수지의 사용량이 증가하는 등의 문제점과 경제적인 손실이 발생할 여지가 증가할 수 있다. 본 연구에서는 VARTM 공정에서 수지 함침에 따른 섬유 보강재의 팽창 현상에 관한 분석을 통하여 복합재료 액상 성형 공정에서의 섬유 체적율을 조절하는 방안을 모색하였다. 그 결과 유동 선단의 진행에 따라 섬유의 팽창 현상이 크게 두 단계로 구분되어 나타나는 것을 확인하였고 각각의 단계에서 작용하는 힘을 분석함으로써 섬유의 체적율 변화에 관한 현상학적 모델을 제시하였고 1차원 편미분 수치 해석과 연계하여 VARTM공정에서 수지 함침에 따른 섬유 체적율의 변화를 예측하였다.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.139-142
• /
• 2018

Silicon (Si) is a promising anode material for next-generation lithium ion batteries (LIBs) because of its high capacity of 4,200 mAh/g ($Li_{4.4}Si$ phase). However, the large volume expansion of Si during lithiation leads to electrical failure of electrode and rapid capacity decrease. Generally, a binder is homogeneously mixed with active materials to maintain electrical contact, so that Si needs a particular binding system due to its large volume expansion. Polyvinyl alcohol (PVA) is known to form a hydrogen bond with partially hydrolyzed silicon oxide layer on Si nanoparticles. However, the decrease of its cohesiveness followed by the repeated volume change of Si still remains unsolved. To overcome this problem, we have introduced the electrospinning method to weave active materials in a stable nanofibrous PVA structure, where stresses from the large volume change of Si can be contained. We have confirmed that the capacity retention of Si-based LIBs using electrospun PVA matrix is higher compared to the conservative method (only dissolving in the slurry); the $25^{th}$ cycle capacity retention ratio based on the $2^{nd}$ cycle was 37% for the electrode with electrospun PVA matrix, compared to 27% and 8% for the electrodes with PVdF and PVA binders.