• Title/Summary/Keyword: vitrinite

Search Result 7, Processing Time 0.015 seconds

Relationship between maceral composition and some parameters indicating the degree of coalification (석탄화도의 지표와 석탄조직성분과의 관계)

  • 박홍수
    • Economic and Environmental Geology
    • /
    • v.32 no.1
    • /
    • pp.83-91
    • /
    • 1999
  • Coal properties are controlled by the following two factors : One is the maceral components and the other is the degree of coalification. In other words, even if coals in question indicate the same degree of coalification, their chemical and physical properties considerably vary one another when their maceral components are different. It is well known that virtrinite reflectance is the best single criterion for the degree of coalification covering the whole range of coal rank. Some authors have recently insisted that sporinite fluorescence is more leliable coal rank parameter than vitrinite reflectance in case of low rank coals. In this paper, to examine the relince of sporinite fluorescence as coal rank parameter, fluidity analysis of coals is newly performed and the data are analyzed in comparision with those of virinite reflectance, sporinite fluorescence and maceral components. The results of this study are as follows; 1) Vitrinite reflectance becomes low when degradinite content is high within one columnar samples, and vice versa. 2) variation of vitrinite reflectance depend on degradinite content and on difference of roiginal plant. 3) In dealing with the Japanese paleogene coals, sporinite fluorescence is more reliable parameter indicating the degree of coalification than vitrinite reflectance. 4) Maximum fluidity increases exponetially in proportion to the increases of degradinite content.

  • PDF

Coal Petrological Characteristics of Korean Coal (국내탄의 석탄암석학적 특성)

  • Park, Hong Soo;Park, Suk Whan
    • Economic and Environmental Geology
    • /
    • v.22 no.2
    • /
    • pp.141-150
    • /
    • 1989
  • In order to make economic and geological evaluation of coal in Korea, proximate and ultimate analyses were carried out as well as coal petrological studies such as maceral analyses, vitrinite reflectance and sporinite fluorescence measurement. The coeffcient of correlation between each factor of both conventional utilization and coal petrological parameters were studied as in Table 5 and 6. Their conclusions were as follow: (1) for anthracite, the good parameters of coal rank are mean vitrinite reflectance, carbon content, hydrogen content and H/C atomic ratio: (2) for brown coal and sub-bituminous coal, the good parameters of coal rank are carbon content, calorific value, moisture content, hydrogen content, oxygen content and O/C atomic ratio as well as vitrinite reflectance and sporinite fluorescence. An attempt is made to infer the coalforming environment by utilization of coal petrological analyses and to make comparison of coal analyses with proximate and ultimate analyses throughout the island arc region including Japan, Philippine and Indonesia and continental region including USA, Canada and Australia. As a result, meceral composition of Paleozoic and Mesozoic anthracite are similar to that of the Paleozoic continental coals, which were formed under dry conditions or low water table, but the coalification degree suddenly increased during Daebo orogeny (middle Jurassic to lower Cretaceous). The Tertiary coal resembles those of Tertiary island arc region coal characterized by higher calorific value, volatile matter content and H/C atomic ratio and by the formation of coal under wet conditions or higher water table.

  • PDF

The Role of Organic Matter in Gold Occurrence: Insights from Western Mecsek Uranium Ore Deposit

  • Medet Junussov;Ferenc Madai;Janos Foldessy;Maria Hamor-Vido
    • Economic and Environmental Geology
    • /
    • v.57 no.4
    • /
    • pp.371-386
    • /
    • 2024
  • This paper presents analytical insights regarding into the occurrence of gold within organic matter, which is hosted by solid bitumen and closely associated with uranium ores in the Late Permian Kővágószőllős Sandstone Formation in Western Mecsek, South-West Hungary. The study utilizes a range of analytical techniques, including X-ray powder diffraction (XRPD) and wavelength dispersive X-ray fluorescence (WD-XRF) for comprehensive mineralogical and elemental analysis; organic petrography and electron microprobe analysis for characterizing organic matter; and an organic elemental analyzer for identifying organic compounds. A three-step sequential extraction method was used to liberate gold from organic matter and sulfide minerals, employing KOH, HCl, and aqua regia, followed by inductively coupled plasma optical emission spectroscopy (ICP-OES) to quantify gold contents. The organic matter is identified as comprising two vitrinite types (telinite V1 and reworked V2) and three solid bitumen forms: nonfluorescing (B1) and fluorescing (B2) fillings within the V1, as well as homogenous pyrobitumen (PB) occupying narrow cracks and voids within globular quartz. Despite the samples exhibiting low total organic carbon content (<1 wt%), they display high sulfur content (up to 6 wt%) and the sequentially extracted noble metal content from the organic matter is found to total 7.45 ppm gold. The research findings suggest that organic matter plays crucial roles in ore mineralization processes. Organic matter acts as an active component in the migration of gold, uranium, and hydrocarbons within sulfur-rich hydrothermal fluids. Additionally, organic matter contributes to the entrapment and enrichment of gold in hetero-atomic organic fractions, forming metal-organic compounds. Moreover, uranium inclusions are observed as oxide/phosphate minerals within solid bitumen and associated vitrinite particles. These insights into the occurrence and distribution of gold within organic matter highlight substantial exploration potential, guiding additional research activities focused on organic matter within the Kővágószőllős Sandstone Formation at the Western Mecsek deposit.

Thermal Maturation and Diagenesis of the Gyeongsang Supergroup, Euiseong Area, SE Korea (의성지역 경상누층군의 열적진화와 속성작용)

  • Son Byeong-Kook;Cheong Tae-Jin;Oh lae-Ho;Kwak Young-Hoon
    • The Korean Journal of Petroleum Geology
    • /
    • v.2 no.2 s.3
    • /
    • pp.83-90
    • /
    • 1994
  • Thermal maturation and diagenesis of the Gyeongsang Supergroup in the Euiseong area are studied by means of organic geochemical techniques and illite crystallinity. Black mudrocks of the Singdong Group contain organic matter of $0.5{\~}2{\%}$ derived from higher plants, being compared to type Ⅲ. Thermal maturity of organic matter reached dry gas generation phase. Tmax by Rock Eval pyrolysis varies between $578^{\circ}C$ and $593^{\circ}C$ regardless of stratigraphic position and localities, and vitrinite reflectance is about 2.9 and $3{\~}4{\%}Ro$ in the Jinju and the Nagdong Formations, respectively. Vitrinite reflectance measurements indicate that the maturation is mainly due to burial and partly to be affected by post-depositional intrusions. Illite crystallinity values from the Nagdong, Hasandong, Jiniu Formations and part of the Iljig Formation are plotted around the boundary between diagenesis and anchizone, indicating dry gas generation stage. However, the values are not dependent on stratigraphic position. The values from the Iljig, Hupyeongdong, Geomgog, and Sagog Formations fall into the range of anchizone, probably resulted from the post-depositional intrusions which occur locally. Both organic geochemical and illite crystallinity data indicate thermal maturation stage of dry gas generation. Diagenesis of the Gyeongsang strata is mostly controlled by burial, and partly affected by post-depositional intrusions. Paleotemperature of the Sindong Group is estimated at around $200^{\circ}C$ on the basis of illite crystallinity.

  • PDF

Property of the Jurassic anthracite (Anthracite from the Seongju Area of the Chungnam Coalfield) (충남탄전(忠南炭田) 무연탄(無煙炭)의 특성(特性))

  • Park, Suk Whan;Park, Hong Soo
    • Economic and Environmental Geology
    • /
    • v.22 no.2
    • /
    • pp.129-139
    • /
    • 1989
  • The anthracite coalfields of Korea are confined to the areas where sedimentary rocks of Permian and Jurassic are preserved. The Chungnam coalfield lies in the sedimentary rocks of Jurassic which belongs to the Daedong Supergroup (the Nampo group). For the property analysis of each coal seam interbeded in Daedong Supergroup, Seongju area is chosen and twelve coalseams are taken. Many standard tests have been established for optical analysis (maceral analysis, coalification degree measurement), chemical analysis (proximate, ultimate analysis) and physical analysis (ignition temperature, ash fusion temperature, hardgrove grindability index and X-ray diffraction). The Jurassic anthracite mainly consist of vitrinite and macrinite and the range of the reflectance is $R_{max}$ 5.0-6.5 which means metaanthracite rank. By the chemical composition analysis, it shows low H/C and high O/C value compare with international average value. By the physical analysis, it has very high ignition temperature ($531-584^{\circ}C$) and ash fusion temperature ($1510-1700^{\circ}C$) and very low combustion velocity (0.2-1.9 mg/min). The very wide range of the hardgrove grindability index (46-132) means that the grindability controlled mainly by the structural conditions of coal bearing strata.

  • PDF

Comparison Study for Domestic Coal and Material Characteristics of Coal from the Shipwreck of Koryo Dynasty (고려시대 선체출토 석탄의 재료학적 특성 및 국산 석탄과의 비교 연구)

  • Lee, JangJon;Park, SukWhan;Lim, SungTae;Han, MinSu
    • Journal of Conservation Science
    • /
    • v.29 no.4
    • /
    • pp.345-354
    • /
    • 2013
  • This study analyses geochemistrical, microscopic, mineralogical characteristics of coals which have been collected from in and out of the shipwreck No 1 of Mado island during underwater excavation in Taean. The result from mineralogical and geochemical analysis reveals that the specific gravity of the coals is $1.28g/cm^3$. Considering that coals contains 10% mineral of it and the specific gravity of the pure is $1.15g/cm^3$, it is believed that the collected coals would be lignite or biturminous coal. The X-ray diffraction analysis which displays the peak of $2{\theta}$ is 20~25C degree, proves that the collected coals would be categorised as low rank coal. The collected coals is composed of: 93%-94%(93.5%) of vitrinite maceral group, 5%-6%(5.5%) of exinite maceral group, and 1% of inertinite maceral group. In addition, the average of reflection rate is $R_{mean}$: 0.627 showing that it would be either high volatile bituminous C coal or sub-bituminous C coal. Such result confirms that the coal is sub-bituminous C or high volatile bituminous C coal in accordance with the U.S Bureau of Mine(USBM) classification system. The element analysis reveals that the coal is the coking coal which is grouped as the bituminous coal. Comparative analysis between the coals of Mado Shipwreck No 1 and domestic coals shows that the coals of Mado Shipwreck is similar to the bituminous coal used in the area of Janggi in Pohang city.

Mineralogical and Drying Characteristics of Chinese Low Rank Coal for Coal Gasification (석탄가스화를 위한 중국산 저급 석탄의 광물학적 및 건조 특성)

  • Park, Chong-Lyuck;Kim, Byoung-Gon;Jeon, Ho-Seok;Kim, Sang-Bae;Park, Suk-Hwan;Lee, Jae-Ryeong
    • Journal of the Mineralogical Society of Korea
    • /
    • v.23 no.3
    • /
    • pp.199-209
    • /
    • 2010
  • Coal gasification technology in the sector of domestic clean coal technologies is being into the limelight since recent dramatic rise of international oil price. In this study, we used a low rank coal from Inner Mongolia, China as a starting material for gasification. Various properties including optical, mineralogical, X-ray spectroscopic, X-ray diffraction, and drying property were measured and tested in order to estimate the suitability of the coal to gasification. The coal was identified as a brown coal of lignite group from the measurement of vitrinite reflectance. The coal has very low slagging and fouling potentials, and the ignition temperature is about $250^{\circ}C$. The major impurities consist of quartz, siderite, and clay minerals. Additionally, the coal had moisture content above 28%. Tests for finding effective drying method showed that the microwave drying is more effective than thermal drying.