• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.43-53
• /
• 2005

This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.

• The Journal of Korean society of community based occupational therapy
• /
• v.6 no.1
• /
• pp.13-23
• /
• 2016

Objective : The aim of the present study was to investigate the effect of aloud reading on handwriting legibility in low-level elementary school children. Methods : The subject of the present study consisted of 45 elementary school 2nd graders who were normally developed checked by the Developmental Test of Visual Perception. Experimental period was conducted total six times that Pre-evaluation once, four times intervention, and Post-evaluation once from November 2 to November 25, 2015. When Pre-evaluation and Post-evaluation was measured the handwriting legibility and speed using Handwriting Skill Test. When intervention divided and implemented to experimental group who handwriting with aloud reading, control group1 who only handwriting, and control group2 who nothing. Pre-evaluation and Post-evaluation identified change the handwriting legibility using Handwriting Skill Test. Result : After intervention, handwriting legibility improve female than male. At word card1, control group1 improve significantly handwriting legibility within group and control group2 come out significant difference but handwriting legibility decrease. At word card2, experimental group and control group1 improve significantly handwriting legibility within group. Experimental group and control group1, control group1 and control group2 come out significant difference between group. Conclusion : The present study demonstrates that handwriting training improve handwriting legibility to elementary school 2nd graders.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.12
• /
• pp.51-57
• /
• 2019

In this paper, we analyzed the performance of IoT based smart wearable mine detection device. There are various mine detection methods currently used by the military. Still, in the general field, mine detection is performed by visual detection, probe detection, detector detection, and other detection methods. The detection method by the detector is using a GPR sensor on the detector, which is possible to detect metals, but it is difficult to identify non-metals. It is hard to distinguish whether the area where the detection was performed or not. Also, there is a problem that a lot of human resources and time are wasted, and if the user does not move the sensor at a constant speed or moves too fast, it is difficult to detect landmines accurately. Therefore, we studied the smart wearable mine detection device composed of human body antenna, main microprocessor, smart glasses, body-mounted LCD monitor, wireless data transmission, belt type power supply, black box camera, which is to improve the problem of the error of mine detection using unidirectional ultrasonic sensing signal. Based on the results of this study, we will conduct an experiment to confirm the possibility of detecting underground mines based on the Internet of Things (IoT). This paper consists of an introduction, experimental environment composition, simulation analysis, and conclusion. Introduction introduces the research contents such as mines, mine detectors, and research progress. It consists of large anti-personnel mine, M16A1 fragmented anti-mine, M15 and M19 antitank mines, plastic bottles similar to mines and aluminum cans. Simulation analysis is conducted by using MATLAB to analyze the mine detection device implementation performance, generating and transmitting IoT signals, and analyzing each received signal to verify the detection performance of landmines. Then we will measure the performance through the simulation of IoT-based mine detection algorithm so that we will prove the possibility of IoT-based detection landmine.

• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.2
• /
• pp.97-117
• /
• 2003

Objective: This study is to examine the validity and reliability of Computerized Neurocognitive Function Test among normal children in elementary school. Methods: K-ABC, K-PIC, and Computerized Neurocognitive Function Test were performed to the 120 body of normal children(10 of each male and female) from June, 2002 to January, 2003. Those children had over the average of intelligence and passed the rule out criteria. To verify test-retest reliability for those 30 children who were randomly selected, Computerized Neurocognitive Function Test was carried out again 4 weeks later. Results: As a results of correlation analysis for validity test, four of continues performance tests matched with those on adults. In the memory tests, results presented the same as previous research with a difference between forward test and backward test in short-term memory. In higher cognitive function tests, tests were consist of those with different purpose respectively. After performing factor analysis on 43 variables out of 12 tests, 10 factors were raised and the total percent of variance was 75.5%. The reasons were such as: 'sustained attention, information processing speed, vigilance, verbal learning, allocation of attention and concept formation, flexibility, concept formation, visual learning, short-term memory, and selective attention' in order. In correlation with K-ABC to prepare explanatory criteria, selectively significant correlation(p<.0.5-001) was found in subscale of K-ABC. In the test-retest reliability test, the results reflecting practice effect were found and prominent especially in higher cognitive function tests. However, split-half reliability(r=0.548-0.7726, p<.05) and internal consistency(0.628-0.878, p<.05) of each examined group were significantly high. Conclusion: The performance of Computerized Neurocognitive Function Test in normal children represented differ developmental character than that in adult. And basal information for preparing the explanatory criteria could be acquired by searching for the relation with standardized intelligence test which contains neuropsycological background.

• Korea Science and Art Forum
• /
• v.19
• /
• pp.281-292
• /
• 2015

For this study, I conducted a survey investigating current situation, user preference, and field experiment. Hospitals utilizing digital sign systems at least five years were selected, which are connected with visual elements (layout, typo, color) used in waiting areas and elements of the systems (time, video time line). The results obtained from the field survey showed that digital sign systems used the color of typo and background contrasted to one another to increase explicitness and to ensure easy understanding of contents. In addition, the Gothic typo with relatively high legibility was adopted. Time and video timeline, which characterize digital sign systems, showed the advertising screens of the hospitals and the guidance of medical treatment at regular intervals. Moreover, survey results on user satisfaction showed that a majority of respondents indicated they had difficulty in understanding digital information conveyed from digital sign systems due to time setting for rotational speed or the small size of typo although most of the users had previous experience with digital sign systems. The highest proportion of respondents (n=86, 86%) answered that information related to medical departments was what they sought most frequently and that this kind of information should be importantly considered in digital sign systems. For the experiment, new samples with restructured contents of current digital sign systems were created and tested while keeping its design unchanged as well as applying these new samples. Study participants were in their 20s through 50s. When the size of typo was larger under the same conditions for all age groups, study participants found the desired information approximately 3.5 seconds faster. In addition, those in their 20-30s and 40-50s showed the time difference of 4.7 seconds for small typo and 6 seconds for large typo, which suggested that there was a difference by age in the amount of time taken in the experiment to find the desired information from the rotating digital sign system regardless of age and the size of typo.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.55-79
• /
• 2013

In this paper, we propose a hybrid genetic algorithm (HGA) approach to effectively solve the reverse logistics network with centralized centers (RLNCC). For the proposed HGA approach, genetic algorithm (GA) is used as a main algorithm. For implementing GA, a new bit-string representation scheme using 0 and 1 values is suggested, which can easily make initial population of GA. As genetic operators, the elitist strategy in enlarged sampling space developed by Gen and Chang (1997), a new two-point crossover operator, and a new random mutation operator are used for selection, crossover and mutation, respectively. For hybrid concept of GA, an iterative hill climbing method (IHCM) developed by Michalewicz (1994) is inserted into HGA search loop. The IHCM is one of local search techniques and precisely explores the space converged by GA search. The RLNCC is composed of collection centers, remanufacturing centers, redistribution centers, and secondary markets in reverse logistics networks. Of the centers and secondary markets, only one collection center, remanufacturing center, redistribution center, and secondary market should be opened in reverse logistics networks. Some assumptions are considered for effectively implementing the RLNCC The RLNCC is represented by a mixed integer programming (MIP) model using indexes, parameters and decision variables. The objective function of the MIP model is to minimize the total cost which is consisted of transportation cost, fixed cost, and handling cost. The transportation cost is obtained by transporting the returned products between each centers and secondary markets. The fixed cost is calculated by opening or closing decision at each center and secondary markets. That is, if there are three collection centers (the opening costs of collection center 1 2, and 3 are 10.5, 12.1, 8.9, respectively), and the collection center 1 is opened and the remainders are all closed, then the fixed cost is 10.5. The handling cost means the cost of treating the products returned from customers at each center and secondary markets which are opened at each RLNCC stage. The RLNCC is solved by the proposed HGA approach. In numerical experiment, the proposed HGA and a conventional competing approach is compared with each other using various measures of performance. For the conventional competing approach, the GA approach by Yun (2013) is used. The GA approach has not any local search technique such as the IHCM proposed the HGA approach. As measures of performance, CPU time, optimal solution, and optimal setting are used. Two types of the RLNCC with different numbers of customers, collection centers, remanufacturing centers, redistribution centers and secondary markets are presented for comparing the performances of the HGA and GA approaches. The MIP models using the two types of the RLNCC are programmed by Visual Basic Version 6.0, and the computer implementing environment is the IBM compatible PC with 3.06Ghz CPU speed and 1GB RAM on Windows XP. The parameters used in the HGA and GA approaches are that the total number of generations is 10,000, population size 20, crossover rate 0.5, mutation rate 0.1, and the search range for the IHCM is 2.0. Total 20 iterations are made for eliminating the randomness of the searches of the HGA and GA approaches. With performance comparisons, network representations by opening/closing decision, and convergence processes using two types of the RLNCCs, the experimental result shows that the HGA has significantly better performance in terms of the optimal solution than the GA, though the GA is slightly quicker than the HGA in terms of the CPU time. Finally, it has been proved that the proposed HGA approach is more efficient than conventional GA approach in two types of the RLNCC since the former has a GA search process as well as a local search process for additional search scheme, while the latter has a GA search process alone. For a future study, much more large-sized RLNCCs will be tested for robustness of our approach.