• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.44-56
• /
• 2008

Previous hardware devices to capture human motion have many limitations; expensive equipment, complexity of manipulation or constraints of human motion. In order to overcome these problems, real-time motion capture algorithms based on computer vision have been actively proposed. This paper presents an efficient analysis method of multiple view images for real-time motion capture. First, we detect the skin color regions of human being, and then correct the image coordinates of the regions by using camera calibration and epipolar geometry. Finally, we track the human body part and capture human motion using kalman filter. Experimental results show that the proposed algorithm can estimate a precise position of the human body.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.133-141
• /
• 2008

As interactive multimedia have come into wide use, user interfaces such as remote controllers or classical computer mice have several limitations that cause inconvenience. We propose a vision-based pointing device to resolve this problem. We analyzed the moving image from the camera which is embedded in the pointing device and estimate the movement of the device. The pose of the cursor can be determined from this result. To process in the real time, we used the low resolution of $288{\times}208$ pixel camera and comer points of the screen were tracked using local optical flow method. The distance from screen and device was calculated from the size of screen in the image. The proposed device has simple configurations, low cost, easy use, and intuitive handhold operation like traditional mice. Moreover it shows reliable performance even in the dark condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.697-705
• /
• 2014

This paper presents a vision based object width measurement method and its application where the light sectioning method is employed. The target object for measurement is a tread, which is the most outside component of an automobile tire. The entire system applying the measurement method consists of two processes, i.e. a calibration process and a detection process. The calibration process is to identify the relationships between a camera plane and a laser plane, and to estimate a camera lens distortion parameters. As the process requires a test pattern, namely a jig, which is elaborately manufactured. In the detection process, first of all, the region that a laser light illuminates is extracted by applying an adaptive thresholding technique where the distribution of the pixel brightness is considered to decide the optimal threshold. Then, a thinning algorithm is applied to the region so that the ends and the shoulders of a tread are detected. Finally, the tread width and the shoulder width are computed using the homography and the distortion coefficients obtained by the calibration process.

• The Journal of Korea Robotics Society
• /
• v.1 no.1
• /
• pp.17-24
• /
• 2006

Though the final goal of mobile robot navigation is to be autonomous, operators' intelligent and skillful decisions are necessary when there are many scattered obstacles. There are several limitations even in the camera-based tele-operation of a mobile robot, which is very popular for the mobile robot navigation. For examples, shadowed and curved areas cannot be viewed using a narrow view-angle camera, especially in bad weather such as on snowy or rainy days. Therefore, it is necessary to have other sensory information for reliable tele-operations. In this paper, sixteen ultrasonic sensors are attached around a mobile robot in a ring pattern to measure the distances to obstacles. A collision vector is introduced in this paper as a new tool for obstacle avoidance, which is defined as a normal vector from an obstacle to the mobile robot. Based on this collision vector, a virtual reflection force is generated to avoid the obstacles and then the reflection force is transferred to an operator who is holding a joystick to control the mobile robot. Relying on the reflection force, the operator can control the mobile robot more smoothly and safely. For this bi-directional tele-operation, a master joystick system using a hall sensor was designed to resolve the existence of nonlinear sections, which are usual for a general joystick with two motors and potentiometers. Finally, the efficiency of a force reflection joystick is verified through the comparison of two vision-based tele-operation experiments, with and without force reflection.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.417-428
• /
• 2017

In this paper, we describe the architectural design, unit component hardware design and core software design(Helmet Pose Tracking Software and Terrain Elevation Data Correction Software) of IHDS(Intelligent Helmet Display System), and describe the results of unit test and integration test. According to the trend of the latest helmet display system, the specifications which includes 3D map display, FLIR(Forward Looking Infra-Red) display, hybrid helmet pose tracking, visor reflection type of binocular optical system, NVC(Night Vision Camera) display, lightweight composite helmet shell were applied to the design. Especially, we proposed unique design concepts such as the automatic correction of altitude error of 3D map data, high precision image registration, multi-color lighting optical system, transmissive image emitting surface using diffraction optical element, tracking camera minimizing latency time of helmet pose estimation and air pockets for helmet fixation on head. After completing the prototype of all system components, unit tests and system integration tests were performed to verify the functions and performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.384-389
• /
• 2005

The objective on this project is to develop a cooperative Field Robot (FR), by using a customize Open Control Platform (OCP) as design and development process. An OCP is a CORBA-based solution for networked control system, which facilitates the transitioning of control designs to embedded targets. In order to achieve the cooperation surveillance system, two FRs are distributed by navigation messages (GPS and sensor data) using CORBA event-channel communication, while graphical information from IR night vision camera is distributed using CORBA Asynchronous Method Invocation (AMI). The QoS features of AMI in the network are to provide the additional delivery method for distributing an IR camera Images will be evaluate in this experiment. In this paper also presents an empirical performance evaluation from the variable chunk sizes were compared with the number of clients and message latency, some of the measurement data's are summarized in the following paragraph. In the AMI buffers size measurement, when the chuck sizes were change, the message latency is significantly change according to it frame size. The smaller frame size between 256 bytes to 512 bytes is more efficient fur the message size below 2Mbytes, but it average performance in the large of message size a bigger frame size is more efficient. For the several destination, the same experiment using 512 bytes to 2 Mbytes frame with 2 to 5 destinations are presented. For the message size bigger than 2Mbytes, the AMI are still able to meet requirement far more than 5 clients simultaneously.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.10
• /
• pp.385-390
• /
• 2021

The gantry is a device that moves fine chips from the feeder to the PCB. While the gantry is moving the part, the camera checks the condition of the part. The purpose of this paper is to find the path with the shortest travel time of the gantry and calculate the travel time according to the path. stop_motion is a way to check the status of the parts currently in use. This paper presents the moving_motion method and the fly_motion method with maximum speed in front of the camera. In addition the signature method was used to inspect the condition of the parts. When comparing the moving time of the three types of gantry, the moving_motion method improved by 9.42% and the fly_motion method by 17.73% compared to stop_motion. When the fly_motion method proposed in this paper is used for the gantry movement path, it is expected that productivity will be improved.

• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.117-122
• /
• 2019

In the field of fluid dynamics, the sloshing effects are most common and significant problem. It is usually appeared in the tank filled with fluid which is on the main structure, thus, sloshing effects and its impact load may affect to entire system. For the sloshing effects analysis, impact loads due to tank motion is generally investigated theocratically, experimentally and numerically. The difficulty of sloshing phenomenon is non-linearity induced by large deformation at the free-surface. In this regard, it is well known issue that the repeatability on the sloshing problems is very low. In this study, moving particle semi-implicit method was employed to simulate sloshing problem and then the results were compared with corresponding experiments captured by high accuracy high speed camera. The results from numerical simulation was compared to experimental results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.507-514
• /
• 2022

Mobile manipulators are getting lime light in the field of home automation due to their mobility and manipulation capabilities. In this paper, we developed a small size manipulator system that can be mounted on a mobile robot as a preliminary study to develop a mobile manipulator. The developed manipulator has four degree-of-freedom. At the end-effector of manipulator, there are a camera and a gripper to recognize and manipulate the object. One of four degree-of-freedom is linear motion in vertical direction for better interaction with human hands which are located higher than the mobile manipulator. The developed manipulator was designed to dispose the four actuators close to the base of the manipulator to reduce rotational inertia of the manipulator, which improves stability of manipulation and reduces the risk of rollover. The developed manipulator repeatedly performed a pick and place task and successfully manipulate the object within the workspace of manipulator.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.629-638
• /
• 2023

This study introduces an innovative approach to monitor the whereabouts of workers within indoor construction settings. While traditional modalities such as GPS and NTRIP have demonstrated efficacy for outdoor localizations, their precision dwindles in indoor environments. In response, this research advocates for the adoption of Aruco markers. Leveraging computer vision technology, these markers facilitate the quantification of the distance between a worker and the marker, subsequently pinpointing the worker's instantaneous location with heightened accuracy. The methodology's efficacy was rigorously evaluated in a real-world construction scenario. Parameters including system stability, the influence of lighting conditions, the extremity of measurable distances, and the breadth of recognition angles were methodically appraised. System stability was ascertained by maneuvering the camera at a uniform velocity, gauging its marker recognition prowess. The impact of varying luminosity on marker discernibility was scrutinized by modulating the ambient lighting. Furthermore, the camera's spatial movement ascertained both the upper threshold of distance until marker recognition waned and the maximal angle at which markers remained discernible.