• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.15-16
• /
• 2012

General lighting will be replaced into LED due to the high efficiency, low power consumption, long life than conventional light, moreover, since it is a basically semiconductor device that can convert the electric energy to visible light at a very high speed, using these characteristics can be performed communication modulation via the high-speed ON-OFF switching. Recently, visible light communication (VLC: Visible Light Communication) technology is received attention and there have been many researches. This paper is implemented media signal transmission by combining LED with VLC, a transmitter used the LED light-emitting device and receiver used an infrared sensor. In order to increase the efficiency of the communication system to improve the existing LED visible light communication driver of power conversion efficiency and thermal issues that is applied to the visible light communication in order to improve the speed of transmission media to research a new way of LED driver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1117-1125
• /
• 2011

In this paper, as a study of the simple visible light communication(VLC) with LED light, the visible light communication system that are made up with the $3{\times}3$ white LED array for visible light transmission, various photodiodes for visible light reception, and a non-carrier NRZ-OOK modulation scheme is designed and implemented to have a 115.2 kbps data speed at 2.5 m distance between transmitter and receiver. For the performance analysis of the developed VLC system, the maximum distance between VLC transmitter and receiver on the conditions of various transmission speeds, the number of LED array, or the various kind of LED and photodiode is obtained, and various performances are analyzed by experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1108-1116
• /
• 2011

The visible light communication system that transmits data by controlling light emission of LED and receives data through photo detecter is considered as one of the strong candidates of the next generation wireless communication systems. The visible light communication provides both lighting and wireless communication wherever the LED lamps are installed. Due to the feature of visible light communication system, the communication is possible within the area that LED light reaches, and the communication quality depends on the light intensity received at the receiver. In this paper, we analyze the effects of LED panel position and lighting angel on communication channel quality in visible light communication systems. Through computer simulations, we prove that position of LED panel and light angle have a great impact on illuminance and SNR of the visible light communication systems.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.273-276
• /
• 2008

This article describes a LED illumination infrastructure for ubiquitous society based on the Visible Light Communication technology. The VLC is one of the advanced communication system using "Visible Light". The VLC system has a lot of advantageous features and can be used in various places for the next future generation. So, we analyzed ubiquitous service model based on the VLC system and some applications. And we renewed discussion about LED illumination infrastructure for u-Society.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.113-114
• /
• 2012

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.486-492
• /
• 2020

The method for preparing a perovskite-type bismuth ferrite (BFO) photocatalyst which reacts to visible LED light and the characteristics of visible light photocatalysis were investigated. BFO was prepared according to the sol-gel method. The prepared BFO consisted mainly of BiFeO₃ structure and formed a nano-sized crystal including Bi₂₄Fe₂O₃₉ structure. The BFO nano crystallines were identified from the UV-visible diffuse reflectance spectra to absorb UV and visible light up to about 600 nm. The bandgap of the BFO determined from the diffuse reflectance spectrum was about 2.2 eV. Formaldehyde was decomposed by the photoreaction of BFO photocatalysts with the visible light LED lamps with wavelengths of 585 nm and 613 nm. The narrow bandgap of BFO led to elicit BFO photocatalytic activity in visible LED light.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.1
• /
• pp.51-56
• /
• 2013

In this paper, we had design the module of the LED-based media transmission mechanics visible light communication system. To implement the media transmission system through visible light communication transmitter, receiver module the using high brightness, we proposed visible light communication system to implement communication distance of up to a maximum transmitter-receiver distance using a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter. It was increased efficiency of approximately 20% by measuring the performance during lens wearing or not wearing on the LED module to improve the efficiency of the media transmission system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2431-2436
• /
• 2012

This paper is implemented simple visible light communication system by combining the communications through LED lighting. It uses a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter to realize LED visible light communication. Initial distance value of the developed transmission and receiver is more than 0~1.5m for LED visible light communication, the overall system transmission rate is organized with thousands kbps variability visible light media transmission system. It was measured the performance experiment during lens wearing or not wearing in order to increase the overall efficiency of the LED module, configures the LED and PD to existing PC module for the performance analysis of the implemented research, experiments the maximum communication distance of the transmitter/receiver according to LED count and the transmission rate, check about application methods and the possibility.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.641-642
• /
• 2018

LED-based visible light communication requires separate transmission and reception equipment and is capable of communication only in the range of the light source. Also, there is an advantage that it can be used in a frequency sensitive area using a visible light band. Research is needed to apply these advantages and characteristics to various fields. In this paper, we implemented and verified the functions of the visible light communication system using broadcast methods.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.425-432
• /
• 2011

To increase the bit rate over than 1 Gb/s in LED visible light communications, we need to reduce the multipath effect of the light in indoor environment. In this paper, we propose a MAC protocol for LED visible light wireless LAN with beamforming technique. We assumed that spatial light modulator is used for beamforming function. We use polling method since detecting another uplink channel is difficult in visible light communication. We also estimated the performance of the proposed MAC protocol.