• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.1
• /
• pp.31-36
• /
• 1982

Sugars and nitrogen contents and physico-chemical properties of ethanol extracts of fresh, dried, and tail ginsengs with different concentrations of the solvent were investigated. The transmittance at 550nm of fresh, dried and tail ginseng extracts (1% D.Wsoln) respectively, and all the extracts were slightly viscous-sticky, brown and pH of 4.8-6.2 Total sugars, sucrose and starch contents of the extracts were decreased with increasing of enthanol concentration as a solvent. Total sugar content of the extracts were decreased in the order of dried, tail and fresh ginseng and sucrose content were decreased in the order of fresh, driedcand tail ginsengs and starch content were decreased in the order of tail, dried and fresh ginsengs. The reducing sugar contents of the extracts were 4.9-3.8 %, 8.6-12.8 % and 7.6-9.1% in fresh, dried and tail ginsengs, respectively. Total nitrogen contents of the extracts were 2.3-4.6% in average and decreased in the order of dried, fresh and tail ginsengs.

• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.838-844
• /
• 2015

The purpose of this study was to perform a functional components analysis and investigate the physical properties of powders made from the stems or fruit of freeze-dried Cheonnyuncho cactus (Opuntia humifusa). The functional components analysis showed that the stem and fruit powders han vitamin C levels of 42.14 mg and 105.21 mg, respectively. The stems powder contained more lutein than the fruit powder. The fruit powder contained more vitamin C than the stem powder. The SDF (soluble dietary fiber) and IDF (insoluble dietary fiber) in the stem powder were 45.24% and 22.15%, respectively, which were higher then the values for the fruit powder. The stem and fruit powders contained 19.30 mg/g and 25.10 mg/g of crude saponin, respectively. The pH of the stem and fruit powders was 5.34 and 5.07, respectively, both indicating low acidity. The L, a and b values of the stem powder color were 78.28, -3.71, and 19.19, respectively. The L, a and b values of the fruit powder color were 55.56, 24.84, and -3.18, respectively. The stems powder had a higher bulk density, water holding capacity, and swelling power than those of the fruit powder, but water-retaining capacity of the stem powder was lower than that of the fruit powder. In addition, the stems powder had a higher viscous material content and water uptake compared to the fruit powder. Based on the above results, we determined that Cheonnyuncho (Opuntia humifusa) powder had potentially useful functional components and physical properties.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.98-133
• /
• 1987

The mechanical and rheological properties of agricultural materials are important for engineering design and analysis of their mechanical harvesting, handling, transporting and processing systems. Agricultural materials, which composed of structural members and fluids do not react in a purely elastic manner, and their response when subjected to stress and strain is a combination of elastic and viscous behavior so called viscoelastic behavior. Many researchers have conducted studies on the mechanical and rheological properties of the various agricultural products, but a few researcher has studied those properties of rice plant, and also those data are available only for foreign varieties of rice plant. This study are conducted to experimentally determine the mechanical and the rheological properties such as axial compressive strength, tensile strength, bending and shear strength, stress relaxation and creep behavior of rice stems, and grain detachment strength. The rheological models for the rice stem were developed from the test data. The shearing characteristics were examined at some different levels of portion, cross-sectional area, moisture content of rice stem and shearing angle. The results obtained from this study were summarized as follows 1. The mechanical properties of the stems of the J aponica types were greater than those of the Indica ${\times}$ Japonica hybrid in compression, tension, bendingand shearing. 2. The mean value of the compressive force was 80.5 N in the Japonica types and 55.5 N in the Indica ${\times}$ Japonica hybrid which was about 70 percent to that of the Japonica types, and then the value increased progressively at the lower portion of the stems generally. 3. The average tensile force was about 226.6 N in the Japonica types and 123.6 N in the Indica ${\times}$ Japonica hybrid which was about 55 percent to that of the Japonica types. 4. The bending moment was $0.19N{\cdot}m$ in the Japonica types and $0.13N{\cdot}m$ in the Indica ${\times}$ Japonica hybrid which was 68 percent to that of the Japonica types and the bending strength was 7.7 MPa in the Japonica types and 6.5 MPa in the Indica ${\times}$ Japonica hybrid respectively. 5. The shearing force was 141.1 N in Jinju, the Japonica type and 101.4 N in Taebaeg, the Indica ${\times}$ Japonica hybrid which was 72 percent to that of Jinju, and the shearing strength of Taebaeg was 63 percent to that of Jinju. 6. The shearing force and the shearing energy along the stem portion in Jinju increased progressively together at the lower portions, meanwhile in Taebaeg the shearing force showed the maximum value at the intermediate portion and the shearing energy was the greatest at the portion of 21 cm from the ground level, and also the shearing strength and the shearing energy per unit cross-sectional area of the stem were the greater values at the intermediate portion than at any other portions. 7. The shearing force and the shearing energy increased with increase of the cross-sectional area of the rice stem and with decrease of the shearing angie from $90^{\circ}$ to $50^{\circ}$. 8. The shearing forces showed the minimum values of 110 N at Jinju and of 60 N at Taebaeg, the shearing energy at the moisture content decreased about 15 percent point from initial moisture content showed value of 50 mJ in Jinju and of 30 mJ in Taebaeg, respectively. 9. The stress relaxation behavior could be described by the generalized Maxwell model and also the compression creep behavior by Burger's model, respectively in the rice stem. 10. With increase of loading rate, the stress relaxation intensity increased, meanwhile the relaxation time and residual stress decreased. 11. In the compression creep test, the logarithmic creep occured at the stress less than 2.0 MPa and the steady-state creep at the stress larger than 2.0 MPa. 12. The stress level had not a significant effect on the relaxation time, while the relaxation intensity and residual stress increased with increase of the stress level. 13. In the compression creep test of the rice stem, the instantaneous elastic modulus of Burger's model showed the range of 60 to 80 MPa and the viscosities of the free dashpot were very large numerical value which was well explained that the rice stem was viscoelastic material. 14. The tensile detachment forces were about 1.7 to 2.3 N in the Japonica types while about 1.0 to 1.3 N in Indica ${\times}$ Japonica hybrid corresponding to 58 percent of Japonica types, and the bending detachment forces were about 0.6 to 1.1 N corresponding to 30 to 50 percent of the tensile detachment forces, and the bending detachment of the Indica ${\times}$ Japonica hybrid was 0.1 to 0.3 N which was 7 to 21 percent of Japonica types. 15. The detachment force of the lower portion was little bigger than that of the upper portion in a penicle and was not significantly affected by the harvesting period from September 28 to October 20. 16. The tensile and bending detachment forces decreased with decrease of the moisture content from 23 to 13 percent (w.b.) by the natural drying, and the decreasing rate of detachment forces along the moisture content was the greater in the bending detachment force than the tensile detachment force.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.718-726
• /
• 2016

Sweet pumpkin paste (SPP) was fermented by Leuconostoc mesenteroides SM at $25^{\circ}C$ for 3 days for enhancing its physicochemical properties. SPPs with 5%, 10%, and 15% solid contents (SC) were fortified with 20% sucrose and 0.5% yeast extract. The unfermented SPP with 15% SC indicated L, a, and b color values of 25.02, 4.66, and 13.35, respectively, and a consistency index of $48.6Pa{\cdot}s^n$. During the 3 days of fermentation, both the a and b color values decreased slightly, whereas the consistency index increased to $188.8Pa{\cdot}s^n$, giving the fermented product a pudding-like consistency. This fermented SPP (15% SC) showed the highest acid production and viable cell counts among samples, indicating pH 3.85, 1.30% acidity and $9.2{\times}10^8CFU/mL$ respectively. The added sucrose was completely utilized after 1 day of fermentation. After 3 days, the insoluble and soluble dextran contents were 8.9% and 4.5%, respectively. Furthermore, the contents of mannitol and fructose were 3.11% and 1.76%, respectively. Regarding the sensory evaluation, this fermented sample also indicated the highest color, taste and texture scores, and was the overall preferred sample. In conclusion, the fermented SPP with 15% SC was carotinoid-rich a wholesome pumpkin-based product that is rich in probiotics and lactic bacteria-produced mannitol and dextran, which gave the product an acceptable viscous pudding-like consistency and good organoleptic properties.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.2
• /
• pp.25-35
• /
• 2011

The objectives of this study were to evaluate the sensory characteristic quality of commercial milk brands selling in the market under the preservation at the temperature of $7^{\circ}C$ and $10^{\circ}C$ stored during the period of shelf-life. Quantitative descriptive analysis after developing of descriptive terms and cluster characterization by PCA analysis over a total of 128 LTLT, HTST, UHT and UHT-ESL milks, were conducted by 8 trained panelists. A total of fourteen attributes; three aroma attributes (grassy, milky, cultured milk aroma) and seven flavor/taste attributes (sweet, salty, sour, milk, cooked, cheesy, paper board) and one aftertaste attributes (rancid flavor) and one texture attributes (viscous), were developed as descriptive terms. Significant differences (P<0.01) in the sensory attributes; sweet, milky, cheesy etc. in UHT milk and sour, cheesy, paper board, rancid etc. in UHT-ESL milk were also found between the two different temperatures within the shelf life, but both type of pasteurized milk samples (LTLT and HTST) showed significant differences (P<0.01) in the attributes, such as cultured milk aroma, salty, sour, cheesy, rancid in LTLT milk and grassy, milky, salty in HTST milk and difference (P<0.05) in cultured milk aroma for HTST milk. Therefore, from the viewpoint of not only hygienic quality but also sensory characteristics, it is required for the better acceptance of milk consumers to amendment on the regulation in relation to the preservation standard of pasteurized milk as well as UHT milk to lower than $7^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.2
• /
• pp.146-154
• /
• 2021

This study was conducted to determine the degree of reduction in the yield of sweetpotato subjected to different shading treatments according to the growing season of the typical viscous sweetpotato 'Hogammi' and the powdery sweetpotato 'Jinyulmi'. Shading was provided using commercially available shading nets (55% and 75% shading level), and the treatments were applied at the following stages of storage root growth: SFS: the storage root formation stage (planting-50^th day), SSS: the storage root swelling stage (50-90^th day), and SAS: the storage root actively swelling Stage (90-120^th day). The growth characteristics according to shading treatments during each growth period, the number of tubers obtained at harvest, and sugar contents were investigated. For both assessed cultivars, there was no significant difference between the control group and the 55% shading treated group with respect to the maximum quantum yield (Fv/Fm) of photosystem II under different shading treatments, whereas the 75% shading group showed slightly higher values than the control group. In both cultivars, the contents of chlorophyll a and b tended to increase in plants subjected to shading treatments compared with the control plants, particularly that of chlorophyll b. Compared with the control group, the chlorophyll b content of 'Hogammi' subjected to 55% and 75% shading increased by 47% and 41%, respectively, whereas that of 'Jinyulmi' increased by 39% and 34%, respectively. We also detected reductions in the dry weights of the above- and belowground parts of the two varieties in response to shading compared with the control, with the reduction in the dry weight of belowground parts being significant. Furthermore, in both varieties, the T/R rate tended to increase in response to shading treatment. Owing to the lack of sunlight, both cultivars tended to suppress the formation and enlargement of tuber roots. Consequently, post-harvest yield analysis revealed that under shading treatments, both cultivars were characterized by poor tuber root growth according to growing season, with the yield of 'Hogammi' showing a greater reduction compared with that of 'Jinyulmi'. In addition, we found that the higher shading level also significantly reduced yields. Compared with the storage root formation and storage root actively swelling stages, shading treatments during the storage root swelling stage significantly affected yield reduction in both varieties.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.105-115
• /
• 2021

The geological CO2 sequestration in underground geological formation such as deep saline aquifers and depleted hydrocarbon reservoirs is one of the most promising options for reducing the atmospheric CO2 emissions. The process in geological CO2 sequestration involves injection of supercritical CO2 (scCO2) into porous media saturated with pore water and initiates CO2 flooding with immiscible displacement. The CO2 migration and distribution, and, consequently, the displacement efficiency is governed by the interaction of fluids. Especially, the viscous force and capillary force are controlled by geological formation conditions and injection conditions. This study aimed to estimate the effects of surfactant on interfacial tension between the immiscible fluids, scCO2 and porewater, under high pressure and high temperature conditions by using a pair of proxy fluids under standard conditions through pendant drop method. It also aimed to observe migration and distribution patterns of the immiscible fluids and estimate the effects of surfactant concentrations on the displacement efficiency of scCO2. Micromodel experiments were conducted by applying n-hexane and deionized water as proxy fluids for scCO2 and porewater. In order to quantitatively analyze the immiscible displacement phenomena by n-hexane injection in pore network, the images of migration and distribution pattern of the two fluids are acquired through a imaging system. The experimental results revealed that the addition of surfactants sharply reduces the interfacial tension between hexane and deionized water at low concentrations and approaches a constant value as the concentration increases. Also it was found that, by directly affecting the flow path of the flooding fluid at the pore scale in the porous medium, the surfactant showed the identical effect on the displacement efficiency of n-hexane at equilibrium state. The experimental observation results could provide important fundamental information on immiscible displacement of fluids in porous media and suggest the potential to improve the displacement efficiency of scCO2 by using surfactants.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.1
• /
• pp.27-33
• /
• 2023

Several domestically consumed sweetpotato derivatives, such as sweetpotato starch for processing raw materials, frozen and refrigerated paste, and powder are dependent on imports. This study was conducted to examine the suitability of sweetpotato cultivars of twelve varieties (powdery-type and viscous type) cultivated in paddy fields, for use in starch, chips, dried products, and beverages. The two-year average yield results of the four cultivars suitable for starch (in order of highest to lowest yield) was as follows: Gogeonmi (4,018 kg/10a); Daeyumi (3,615 kg/10a); Jinhongmi (3,426 kg/10a); Singeonmi (2,837 kg/10a). The starch content was 20.2%, 18.2%, 21.2%, and 20.6% in Daeyumi, Gogeonmi, Singeonmi, and Jinghongmi, respectively. The total amount of starch was higher in Daeyumi (730 kg/10a) and Gogeonmi (731 kg/10a) than that in Singeonmi and Jinghongmi. The yield of Pungwonmi and Shinjami were 4,443 and 3,602 kg/10a, respectively. Powdery-type sweetpotatoes (Daeyumi and Gogeonmi) showed the low decay rates of all cultivars (0.8 and 0%, respectively). The yield of the storage root formation and storage root swelling stages by water-logging treatment decreased by 16.5% and 15.4% for Pungwonmi, and by 17.2% and 10.0% for Shinjami. Drainage management of paddy fields is necessary to reduce the damage caused by water-logging. Our results suggest that cultivation of sweetpotato varieties suitable for processing raw materials in paddy fields will enable stable yields of sweetpotato with a high starch content.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.1
• /
• pp.20-26
• /
• 2023

Fiber content in the storage roots of sweetpotato varies between different varieties. For examples, the high fiber content of certain types has a poor texture when steamed or roasted. This study was conducted to evaluate the optimal sieve mesh size for separating fibers, the chemical composition of fibers and differences in fiber content among different varieties. We found that the separated fiber content (dry weight) of mashed and steamed sweetpotato was higher after washing three times (143.3 mg/100 g) compared with that washed five times (128.4 mg/100 g). The Hogammi variety remained 85.9% of total fiber content at 10 mesh (2,000 ㎛) and 9.6% of total fiber content at 30 mesh (600 ㎛), and Jinyulmi remained 74.9 and 16.7% of total fiber content , respectively. Therefore, a 30 mesh sieve was considered the most suitable for fiber separation. Among the 10 studied cultivars, Jinhongmi showed the lowest amount of fiber (24.8 mg/100 g) and Hogammi had the highest amount (111.4 mg/100 g), which was 4.5 times larger than that of Jinhongmi. Cellulose, hemicellulose and lignin content of separated fibers showed no difference between the viscous-type Hogammi and powdery-type Jinyulmi varieties, with averages of 32.5, 22.3 and 29.6%, respectively. Correlation results using the Image J program showed a significant correlation between the distribution of the stained area and the fiber content (R = 0.74, p < 0.05). Staining distribution differed among varieties, suggesting that a simple fiber content test could be performed using the staining method on raw sweetpotato. These results provide useful information to help inform farmers on the fiber content of different sweetpotato varieties.

• Economic and Environmental Geology
• /
• v.57 no.1
• /
• pp.1-15
• /
• 2024

The Melanesian region in the western Pacific is dominated by complex plate tectonics, with the largest oceanic plateau, the OntongJava plateau, and a hotspot, the Caroline Islands. To better understand the complex geodynamics of the region, we estimate P- and S-velocity models and 𝛿 (V_P/V_S) model by using relative teleseismic travel times measured at seismometers on land and the seafloor. Our results show high-velocity anomalies in the subduction zones of the Melanesian region to a depth of about 400 km, which is thought to be subducting Solomon Sea, Bismarck, and Australian plates along plate boundaries. Along subduction zones, positive 𝛿 (V_P/V_S) anomalies are found, which may be caused by partial melting due to dehydration. A broad high-velocity anomaly is observed at 600 km depth below the Ontong-Java plateau, with a negative 𝛿 (V_P/V_S) anomaly. This is thought to be a viscous and dry remnant of the Pacific plate that subducted at 45-25 Ma, with a low volume of fluids due to dehydration for a long period in the mantle transition zone. Beneath the Caroline Islands, a strong low-velocity anomaly is obseved to a depth of 800 km and appears to be connected to the underside of the remnant Pacific plate in the mantle transition zone. This suggests that the mantle plume originating in the lower mantle has been redirected due to the interaction with the remnant Pacific plate and has reached its current location. The mantle plume also has a positive 𝛿 (V_P/V_S) anomaly, which is thought to be due to the influence of embedded fluids or partial melting. A high-velocity anomaly, interpreted as an effect of the thick lithosphere beneath the Ontong-Java plateau, is observed down to 300 km depth with a negative 𝛿 (V_P/V_S) anomaly, which likely indicate that little fluid remains in the melt residue accumulated in the lithosphere.