• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.719-726
• /
• 1997

This research was conducted to analyze the change of surface tension, viscosity, streaming current and conductivity of transformer oil when it were injected with the interface active substances.(anionic:S-111, cationic:S-121, amphoteric:S-131) The changes properties of the surface tension and viscosity of the oil which were injected with the interface active substances were divided into the changes area and the minimum reduction area. The surface tension and viscosity of the oil which were injected with three different kinds of interface active substances showed remarkable change at the point where the concentration of the substance in anionic, in cationic and in amphoteric were 100[ppm], 10[ppm] and 1[ppm] respectively. The streaming current and conductivity of the same sample oil were also changed at the same densities of the surface tension and viscosity. For this factor, it was possibile for us to interpret the mechanism of the streaming current and conductivity. Therefore the interface active substances of the three kinds were injected into the oil within the limit of optimal volume, prevention effects of electrification were showed more excellence than unmixed insulating oil.

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.148-151
• /
• 2006

In order to examine the process parameters for the vitrification of Low and Intermediate Level radioactive Waste (LILW) generated from nuclear power plants, measurements of several melt properties was performed for four selected glasses containing simulated waste. Electrical conductivity and viscosity were determined at temperatures ranging from 1123 to $1673^{\circ}C$. The temperature dependences of both properties in the molten state showed a similar behavior in which their values decrease as the temperature increases. The values of the electrical conductivity and viscosity at a temperature of 1423K adopted in an induction cold crucible melter process were $0.27{\sim}0.42$ S/cm and $9.8{\sim}42$ dPas, respectively.

• 한국세라믹학회지
• /
• 제40권10호
• /
• pp.936-942
• /
• 2003

In order to develop glass formulations for vitrifying Low-and Intermediate-Level radioactive Wastes (LILW) from nuclear power plants of Korea Hydro & Nuclear Power (KHNP) Co., Ltd., promising glass formulations were selected based on glass property model predictions for viscosity, electrical conductivity and leach resistance. Laboratory measurements were conducted to verify the model predictions. Based on the results, the models for electrical conductivity, US DOE 7-day Product Consistency Test (PCT) elemental release, and pH of PCT leachate are accurate for the LILW glass formulations. However, the model for viscosity was able to provide only qualitative results. A leachate conductivity test was conducted on several samples to estimate glass leach resistance. Test results from the leachate conductivity test were useful for comparison before PCT elemental release results were available. A glass formulation K11A meets all the KHNP glass property constraints, and use of this glass formulation on the pilot scale is recommended. Glass formulations K12A, K12B, and K12E meet nearly all of the processing constraints and may be suitable for additional testing. Based on the comparison between the measured and predicted glass properties, existing glass property models may be used to assist with the LILW glass formulation development.

• 폴리머
• /
• 제36권3호
• /
• pp.364-371
• /
• 2012

폴리스티렌(PS)/단일벽 탄소나노튜브(SWCNT) 나노복합재료를 라텍스 기술로 제조하여 계면활성제(SDS) 첨가에 따른 SWCNT의 분산 정도와 나노복합재료의 유변학적, 전기적 물성을 고찰하였다. 나노복합재료는 단분산 PS 입자에 SDS를 첨가한 SWCNT 분산액을 혼합한 후 동결건조하여 제조하였다. SDS 함량이 증가함에 따라 나노튜브의 분산성이 향상되어 나노복합재료의 저장 탄성률과 복소 점도는 증가하지만, 지나치게 증가시킨 경우에는 저분자량의 SDS로 인해 감소하는 결과를 보여주었다. 전기 전도도는 SDS를 첨가함에 따라 급격히 향상된 후 큰 변화를 보이지 않았다. 이는 나노튜브의 분산성 향상에 의한 전기 전도도 증가와 SDS 도포에 의한 SWCNT의 전기 전도도 저하의 경쟁에 의한 것으로 추론된다. SDS를 SWCNT 함량의 2배로 첨가한 경우가 나노복합재료의 전기 전도도 및 사용 물성 향상에 최적 조건이었다. 이 경우 전도성을 부여하는 SWCNT의 임계 함량은 1 wt% 이하에서 나타났다.

• 한국재료학회지
• /
• 제31권2호
• /
• pp.108-114
• /
• 2021

In the manufacturing of bulk graphite, pores produced by vaporization and discharge of volatile materials in binders during carbonization reduce the density of bulk graphite, which adversely affects the electrical conductivity, strength and mechanical properties. Therefore, an impregnation process is introduced to fill the pores and increase the density of bulk graphite. In this study, bulk graphite is prepared by varying the viscosity of the impregnant. The microstructure of bulk graphite is observed. The flexural strength and electrical resistivity are measured. As the viscosity of the impregnants decreases and the number of impregnations increases, it is shown that the number of pores decreases. The density before impregnation is 1.62 g/㎤. The density increases to 1.67 g/㎤ and porosity decreases by 18.6 % after three impregnations using 5.1 cP impregnant, resulting in the best pore-filling effect. After three times of impregnation with a viscosity of 5.1 cP, the flexural strength increases by 55.2 % and the electrical resistivity decreases by 86.76 %. This shows that a slight increase in density due to the pore-filling effect improves the properties of bulk graphite.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.283-289
• /
• 2009

In level set method, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We showed here that the weighted harmonic mean (WHM) method for rate constants of various rate processes, including viscosity, thermal conductivity, electrical conductivity, and permittivity, gives much more accurate results than the WAM method. The selection of interpolation scheme is particularly important in multi-phase electrohydrodynamic problems in which driving force for fluid flow is electrical force exerted on the phase interface. Our analysis also showed that WHM method for both electrical conductivity and permittivity gives not only more accurate, but also more physically realistic distribution of electrical force at the interface. Our arguments are confirmed by numerical simulations of drop deformation under DC electric field.

• 폴리머
• /
• 제26권5호
• /
• pp.644-652
• /
• 2002

전자파 차폐용 개스킷으로 적용할 수 있는 금속계 입자와 상온경화형 실리콘 수지의 페이스트계에 대한 정량적인 해석을 수행하였다. 금속입자 충전 복합재료의 전기 전도성 및 유변학적 거동은 입자의 형상, 크기, 분산상태에 많은 영향을 받는다. 고충전계에서 입자들은 매우 복잡한 응집상태를 형성하며 전단속도와 같은 외부요인에 의해 응집구조가 변하고 이에 따라 전기 전도도가 달라지게 된다. 본 연구에서는 금속입자의 평균직경 및 분산성에 따른 영향을 점도측정 및 전기 전도도 측정 방법을 통해 해석하였으며 이를 통해 금속입자의 선정기준을 제시하였다. 금속입자의 종류에 따라 점도분포, 전단응력의 영향, 전기 전도성의 변화 등이 차이를 보였다. 상대적으로 직경이 큰 입자에서 전단응력에 의한 영향이 두드러지게 나타났으며 동일 함량에서 분산성의 제어를 통해 점도 및 전기 전도도의 개선이 가능함을 보였다.

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.33-39
• /
• 2004

In order to vitrify the W1 waste (ion-exchange resin(IER), zeolite, and dry active waste(DAW)) generated from Korean Nuclear Power Plants, a glass formulation development based on waste compositions and production rates was performed. A aluminoborosilicate glass, AG8W1, was formulated to vitrify the W1 waste in an induction cold crucible melter(CCM). The processability, product performance, and economics of the candidate glass were calculated using a computer code and were measured experimentally in the laboratory and CCM. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. Start-up and maintaining glass melt of the candidate glass were favorable in the CCM. The product quality of the glass such as chemical durability, phase stability, etc. was satisfactory. The vitrification process using the candidate glass was also evaluated to be operated as economically as possible.

• 방사성폐기물학회지
• /
• 제2권3호
• /
• pp.175-180
• /
• 2004

In order to vitrify the combustible dry active waste (DAW) generated from Korean Nuclear Power Plants, a glass formulation development based on waste composition was performed. A borosilicate glass, DG-2, was formulated to vitrify the DAW in an induction cold crucible melter (CCM). The processability, product performance, and volume reduction effect of the candidate glass were evaluated using a computer code and were measured experimentally in the laboratory and CCM. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. Start-up and maintaining glass melt of the candidate glass were favorable in the CCM. The product of the glass product such as chemical durability, phase stability, and density was satisfactory. The vitrification process using the candidate glass was also evaluated assuming that it was operated as economically as possible.

• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.387-397
• /
• 2021

Deep eutectic solvents have been established as feasible metal electroplating solvent alternatives over traditional toxic aqueous plating baths. However, water, either added intentionally or unintentionally, can significantly influence the solvent's physical properties and performance, thereby hindering its industry application. In this study, the hygroscopicity, or the ability to absorb moisture from the environment, of synthesized ethaline (1:2 choline chloride:ethylene glycol) was investigated. The kinematic viscosity, electrical conductivity, electrochemical window, and water content of ethaline were monitored over a 2-week period. Karl Fischer titration tests showed that ethaline exposed to the atmosphere displayed significant hygroscopicity compared to its unexposed counterpart. ¹H NMR spectroscopy revealed that water vapor was readily absorbed at the surface due to the hydrophilic groups present in the ethaline molecule. Water uptake resulted in the decrease in viscosity, increase in electrical conductivity and narrowing of the electrochemical window of ethaline. Solution heating at 100℃ removed the absorbed moisture and allowed the recovery of the solvent's initial properties.