• Geomechanics and Engineering
• /
• v.29 no.1
• /
• pp.53-63
• /
• 2022

Simplified analytical solutions are developed for the dynamic analyses of an axially loaded pile foundation embedded in a transverse-isotropic, fluid-filled, poro-visco-elastic soil with rigid substratum. The pile is modeled as a viscoelastic Rayleigh-Love rod, while the surrounding soil is regarded as a transversely isotropic, liquid-saturated, viscoelastic, porous medium of which the mechanical behavior is represented by the Boer's poroelastic media model and the fractional derivative model. Upon the separation of variables, the frequency-domain responses for the impedance function of the pile top, and the vertical displacement and the axial force along the pile shaft are gained. Then by virtue of the convolution theorem and the inverse Fourier transform, the time-domain velocity response of the pile head is derived. The presented solutions are validated, compared to the existing solution, the finite element model (FEM) results, and the field test data. Parametric analyses are made to show the effect of the soil anisotropy and the excitation frequency on the pile-soil dynamic responses.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.3
• /
• pp.23-28
• /
• 1997

The phase diagram for the surfactant mixture system of N-dodecanocyl-N-methyl amido polyolcarboxyl alkyl ether(DGC)/N-dodecanocyl-N-alkyl glucamine(DG)/water was studied usingpolarized microscopy, differential scanning calorimetry(DSC) and rheological measurements respectively. Using polarized microscopy, the textures of liquid crystal phases obtained at various surfactantconcentrations were investigated as a function of surfactant concentration and temperature, and phasetransitions between anisotropic liquid crystal phases and isotropic liquid phase were examined usingDSC measurements. Viscoelastic properties of surfactant solutions determined between hexagonal andlamellar liquid crystal phase by rheological measurements were approximately consistent with the resultsobtained by polarized microscopy and DSC. In the study for the phase of DGC/DG(5:5 mol ratio)/water system. It could be found that the hexagonal liquid crystal phase appeared at 25${\sim}$60wt％ ofsurfactant, the cubic liquid crystal phase at 50${\sim}$65wt％ and the lamellar crystal phase at above 70wt％.

• Archives of Pharmacal Research
• /
• v.25 no.6
• /
• pp.770-780
• /
• 2002

The airway surface liquid (ASL), often referred to as mucus, is a thin layer of fluid covering the luminal surface of the airway. The major function of mucus is to protect the lung through mucociliary clearance against foreign particles and chemicals entering the lung. The mucus is comprised of water, ions, and various kinds of macromolecules some of which possess the protective functions such as anti-microbial, anti-protease, and anti-oxidant activity. Mucus glycoproteins or mucins are mainly responsible for the viscoelastic property of mucus, which is crucial for the effective mucociliary clearance. There are at least eight mucin genes identified in the human airways, which will potentially generate various kinds of mucin molecules. At present, neither the exact structures of mucin proteins nor their regulation are understood although it seems likely that different types of mucins are involved in different functions and might also be associated with certain airway diseases. The fact that mucins are tightly associated with various macromolecules present in ASL seems to suggest that the defensive role of ASL is determined not only by these individual components but rather by a combination of these components. Collectively, mucins in ASL may be compared to aircraft carriers carrying various types of weapons in defense of airborne enemies.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.737-744
• /
• 2021

An investigation is conducted to study a solid-liquid mixture vertically upward hydraulic transport of solid particles by non-Newtonian fluids in the Mud system. Rheology of particulate suspensions in viscoelastic fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, etc. In this study a clear acrylic pipe was used in order to observe the movement of solid particles. Annular velocities varied from 0.4 m/s to 1.2 m/s. The mud systems which were utilized included aqueous solution of sodium carboxymethyl cellulose (CMC) solutions. Main parameters considered in the study were inner-pipe rotary speed, fluid flow regime and particle injection rate. Solid volumetric concentration and pressure drops were measured for the various parameters such as inclination angle, flow rate, and rotational speed of inner cylinder.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.269-274
• /
• 2002

statement of problem The viscoelastic property is the most important and peculiar characteristics of soft liners. But the authorized standard is not certainly established than other dental materials. purpose of study This study is aimed to compare the initial flow of gelation of the modified soft liner with 4-META with that of PMMA soft liners using dynamic method and evaluate the clinical acceptance of the trial materials. materials and method This study consists of 3 groups with the given % of 4-META powder in the Coe soft liquid; 0%, 5%, 10% Each group was tested for 10 times to record the change of G′values during 3 hours. the gelation time was recorded by the oscillating rheometer with parallel plate with 1 rad/sec. results As the results of this study, the gelation time of modified soft liner was elongated by 5 to 6 minutes. conclusion The mean gelation time of modified soft liner could be within the range of clinically acceptable.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.101-113
• /
• 1996

In general, printing inks are mainly composed of pigments and vehicles. Its characteristics are affected, to a greater or lesser extent, by the size and distribution of the pigment particles in the dispersion. Color strength, transparency and gloss generally increases with an decrease in particle size of pigments. On the contrary, opacity, lightfastness tend to increases with an increase in particle size of pigments In this work, we have investigated an effect of surface area of pigments on the physical properties of printing of printing ink which made up vehicles for sheet fed and organic pigment Lake Red C(C.I.Pigment Red 53:1) that different surface area and particle size. It was found that gloss, tack and yield value increases with an increase in surface are of pigments, but grindness is reduced.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.89-114
• /
• 1996

Liquid crystal-polymer composite(LCPC) films consisting of a continuous LC phase embedded in a three-dimensional network of polymer matrix are formed by photopolymerization-induced phase separ on. The LCPC films are switched from a light-scattering stats to a highly transparent stats on the application of electric fields. Since the alignment of LC molecular determines the electro-optical properties of films, the requirement for good contrast is to generate the nematic phase at high concentration. On the other hand, the concentration of UV-curable monomer must be increased above some critical value to from the flexible matrix of unbounded polymer. The mixing ratio of LC and UV-curable monomer affects the electro-optical and viscoelastic properties of LCPD films in two opposing ways. By controlling the phase separation process, at an LC fraction of 0.7, the maximum performance of LCPC films has been achieved, the response time of which is 2ms on the application of electric fields.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.465-470
• /
• 2006

An experimental investigation is carried out to study 2-phase vertically upward hydraulic transport of solid particles by water and non-Newtonian fluids in a slim hole concentric annulus with rotation of the inner cylinder. Rheology of particulate suspensions in viscoelastic fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, etc. In this study a clear acrylic pipe was used in order to observe the movement of solid particles. Annular fluid velocities varied from 0.2 m/s to 3.0 m/s. Pressure drops and average flow rate and particle rising velocity are measured. For both water and 0.2% CMC solutions, the higher the concentration of the solid particles is, the larger the pressure gradients become.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1863-1868
• /
• 2008

In an electrospinning process, nanofibers are produced from a droplet of a viscoelastic polymer solution subjected to strong electric field. To date, intrinsic bending instability of the electrical jets has resulted in random piles of nanofibers on a grounded collector plate. Here we report a novel electrospinning process where a hollow micropillar is constructed by the coiling of nanofibers on a sharp grounded collector. We show that the hollow microstructure formation can be explained by the viscous fluid rope coiling theory. The current process can be employed for the fabrication of three-dimensional scaffolds for cell culturing and the three-dimensional nanoprinting.

• Journal of computational fluids engineering
• /
• v.14 no.4
• /
• pp.101-108
• /
• 2009

We present a new finite-element scheme for direct numerical simulation of particle suspensions in simple shear flow of a viscoelastic fluid in 3D. The sliding tri-periodic representative cell concept has been combined with DEVSS/DG finite element scheme by introducing constraint equations along the domain boundary. Rigid body motion of the freely suspended particle is described by the rigid-shell description and implemented by Lagrangian multipliers on particle boundaries. We present the bulk rheology of suspensions through the numerical examples of single-, two- and many-particle problems, which represent a large number of such systems in simple shear flow. We report the steady bulk viscosity and the first normal stress coefficient, which show shear-thickening behavior for both properties.