• Title/Summary/Keyword: virtue-property

Search Result 28, Processing Time 0.024 seconds

A problem of authenticity in the chapter 'Confucius became aged, and liked "The Book of Changes"' of yao 要, "essentials," seen throughout 『帛書周易』 the Mawangdui Boshu Zhouyi Manuscript. -in relation to Confucius and 『易』"The Changes"- (『백서주역(帛書周易)』 「요(要)」의 '부자노이호역(夫子老而好易)'장의 진위(眞僞) 문제 -공자와 『역』의 관계를 중심으로-)

  • Kim, Sang-sup
    • Journal of Korean Philosophical Society
    • /
    • v.129
    • /
    • pp.1-22
    • /
    • 2014
  • Columns 12-18 record a conversation between an aged Confucius and his disciple Zi Gong concerning the Changes and especially the role of divination in its use. The last section, from the bottom of column 24, concerns the hexagrams Sun損, "Decrease," and Yi益, "Increase," which Confucius is here made to regard as the culmination of wisdom in the Zhouyi. The conversation between Confucius and Zi Gong, and especially Zi Gong's apparent misunderstanding of Confucius's interest in the text, has already attracted considerable scholarly interest. Zi Gong criticizes Confucius for changing his teaching about the importance of the Zhouyi and for performing divinations. Confucius responds that while he does indeed perform divinations. there is a major difference between his use of the text and that of others: he regards the I Ching as a repository of an ancient wisdom. This would seem to signal recognition of a dramatic change in the function and status of the text. Zi Gong said: "Does the Master also believe in milfoil divination?" The Master said: "I am right in only seventy out of one hundred prognostications. Even with the prognostications of Liangshan of Zhou one necessarily follows it most of the time and no more." The Master said: "As for the Changes, I do indeed put its prayers and divinations last, only observing its virtue and property. Intuiting the commendations to reach the number, and understanding the number to reach virtue, is to have humaneness and to put it into motion properly. If the commendation do not lead to the number, then merely acts as a magician; if the number does not lead to virtue, then one merely acts as a scribe. The divinations of scribes and magicians tend toward it but are not yet there; delight in it but are not correct. Perhaps it will be because of the Changes that sires of later generations will doubt me. I seek its virtue and nothing more. I am on the same road as the scribes and magicians but end up differently. The conduct of the gentleman's virtue is to seek blessings; that is why he sacrifices, but little; the righteousness of his humaneness is to seek auspiciousness; that is why he divines, but rarely. Do not the divinations of priest and magicians come last!" Although Confucius says two ways of the symbolic numbers and virtue-property, he emphasizes his way of virtue and property more important. In fact he who wrote in Yao 要, "essentials," Confucius's saying describes his own viewpoints of the Changes throughout the conversations between Confucius and his disciple Zi Gong, and is only to borrow the name of Confucius. Furthermore, quoting the original text in Yao 要, "essentials," in sequence, also comparing the materials of "the Analects of Confucius論語," with "the Shih chi史記," this thesis will be centered to a great extent on the relative similarity and differences between the Mawangdui Boshu Zhouyi Manuscript and the received text, and discussed the authencity of Yao 要, "essentials," of the contents shown in the chapter of 'Confucius became aged, and liked "The Book of Changes."' the relation of Confucius and the Changes will be clarified naturally through this progress.

A Study on the Seller's Liability regarding Property in Goods on the International Sale of Goods

  • Oh, Won-Suk;Min, Joo-Hee
    • THE INTERNATIONAL COMMERCE & LAW REVIEW
    • /
    • v.52
    • /
    • pp.3-22
    • /
    • 2011
  • This study examines the seller's liability to transfer the property to the buyer. Even though contracting parties choose CISG as the governing law regulating their obligations and rights by means of their contract, CISG does not concern with the effect generated by the transfer of property. Thus, the issues of the property is settled in conformity with the domestic law applicable by virtue of the rules of private international law. By considering the general rules of the transfer of property in goods under SGA and KCC as the lex rei sitae, the difference of requirements to pass the property between them is analyzed and then the reasons why the transfer of property is importantly considered are discussed. In addition, as CISG does not exclude completely the matters concerning the property and provides the provision like Art 41, the seller's liability to deliver goods free from the third party right or claim is examined under Art 41. Lastly, the practical advice is suggested.

  • PDF

On Nominalist Paraphrase (유명론적 번역에 대하여)

  • Joo, Yo-Han
    • Korean Journal of Logic
    • /
    • v.14 no.1
    • /
    • pp.77-102
    • /
    • 2011
  • This paper is about the problems that Quine's criterion of ontological commitment creates for Nominalists. Quine's clear criterion of ontological commitment, summarized as "to be is to be the value of a variable", means that when we accept a sentence to be true, we are committed to the existence of things that must exist for the sentence to be true. The criterion causes problems for Nominalists. According to Quine's criterion, Nominalists who consider "Humility is a virtue" as true should accept the existence of the property, humility. However, Nominalists are reluctant to accept that properties such as humility exist, although they wish to accept what is meant by "humility is a virtue". The way out of this predicament is presenting a paraphrase which delivers what Nominalists wanted to say through the original sentence without ontological commitment to the property. Several attempts were made to paraphrase such sentences, only to fail. In this paper, successful paraphrases will be presented to cope with previously discussed difficulties. Beforehand, several issues involved in the Quine's criterion will be clarified. Also, Lewis's critical objection that we should give up the business of paraphrase will be discussed.

  • PDF

New Appraisal Method for Blocking Effects in Subimage Coding

  • Park, Jae-Ho;Kwak, Hoon-Sung
    • Journal of Electrical Engineering and information Science
    • /
    • v.1 no.1
    • /
    • pp.77-81
    • /
    • 1996
  • Considering the human visual masking property, a modified relationship between the activity function and the visibility threshold is developed. This leads to a novel objective appraisal method for blocking effects in a lossy subimage coding by virtue of the human visual sensitivity. The appraisal criterion is examined using a series of reconstructed images that are DCT-coded at various bit rates. Experimental results show that the presented blocking effect measure well agrees with the subjective ranking.

  • PDF

Development of Control System of Twin-Fluid Nozzles for Controlling Spraying Rate and Droplet Size (이류체노즐을 이용한 분무량과 분무입경 제어시스템 개발)

  • 이중용;안형철;정창주
    • Journal of Biosystems Engineering
    • /
    • v.25 no.1
    • /
    • pp.11-18
    • /
    • 2000
  • In precision chemical application increment of biological efficacy with less chemical is the virtue. spraying rate and droplet size is closely related to biological efficacy. this study was performed to develope a spray-control-system that could control spraying rate and droplet size independently. Twin-fluid nozzles were selected and tested to certify if the nozzles were suitable for the objective of this study. Characteritics of the nozzles i.e., spraying rte and droplet size change u8nder the changes of spraying pressure and air pressure were statistically modeled. The model had I to 1 matching property between dependent variables and independent variables. Using the property and the model, inverse relationship could be determined between variables. A feedback spray control system was developed and tested with predetermined error of 5 % in pressure. The system showed 4 % error in spraying rate and 9 % error in droplets size. Performance of the system could be upgraded by fine tuning but, in practical sense keeping air pressure in the field sprayer was the bottle neck of commercialization of the spray system.

  • PDF

An Extended AND-OR Graph-Based Expert System in Electronic Commerce

  • 이건창;조형래;권순재
    • Proceedings of the Korea Inteligent Information System Society Conference
    • /
    • 1999.10a
    • /
    • pp.281-289
    • /
    • 1999
  • The objective of this paper is to propose a brand new interface mechanism to provide more intelligent decision making support for EC problems. Its main virtue is based on a numerical process mechanism by using an Extended AND-OR Graph (EAOG)-based logic algebra. Using this mechanism, decision makers engaged in electronic commerce (EC) can effectively deal with complicated decision making problems. In the field of traditional expert systems research, AND-OR Graph approach has been suggested as a useful tool for representing the logic flowchart of the forward and/or backward chaining inference methods. However, the AND-OR Graph approach cannot be effectively used in the EC problems in which real-time problem-solving property should be highly required. In this sense, we propose the EAOG inference mechanism for EC problem-solving in which heurisric knowledge necessary for intelligent EC problem-solving can be represented in a form of matrix. Finally, we have proved the validity of our approach with several propositions and an illustrative EC example

  • PDF

A Study on the Identification of Cutter Offset by Cutting Force Model in Milling Process (밀링가공에서 절삭력 모델을 이용한 커터 오프셋 판별에 관한 연구)

  • 김영석
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.7 no.2
    • /
    • pp.91-99
    • /
    • 1998
  • This paper presents a methodology for identifying the cutter runout geometry in end milling process. Cutter runout is common but undesirable phenomenon in multi-tooth machining because it introduces variable chip loading to insert which results in a accelerated tool wear. amplification of force variation and hence enlargement vibration amplitude From understanding of chip load change kinematics, the analytical cutting force convolution model was formulated as the angular domain convolution model was formulated as the angular domain convolution of three dynamic cutting force component functions. By virtue of the convolution integration property, the frequency domain expression of the local cutting forces and the chip width density of the cutter. Experimental study is presented to validate the analytical model. This study provides the in-process monitoring and compensation of dynamic cutter runout to improve machining tolerance and surface quality for industrial application.

  • PDF

Reactivity of the Biheterocyclic Betaine with the para-Substituted Phenacyl Bromides for the Ring Transformation Reaction

  • Yoo, Kyung-Ho;Kim, Dong-Jin;Kim, You-Seung;Park, Sang-Woo
    • Bulletin of the Korean Chemical Society
    • /
    • v.9 no.3
    • /
    • pp.164-166
    • /
    • 1988
  • 7-Dithiocarboxy-3-phenyl-5,6-dihydro imidazo[2,1-b]thiazolium-betaine (2) was prepared by treatment of 3-phenyl-5,6-dihydro imidazo[2,1-b]thiazole (1) with carbon disulfide in acetone at room temperature. On the reaction of 2 with para-substituted phenacyl bromides (4) having the electron withdrawing property by virtue of (+) resonance (R) < (-) inductive (I) or (-) resonance (R), (-) inductive (I) effect, ring transformation product p-substituted-2-[2-[7-(p-substituted benzoyl)-5-thioxo-2,3-dihydro-1H-imidazo[1,2-c] thiazol-1-yl]-2-phenylvinylthio] acetophenone (6) was obtained; however, when R is electron donating grops with (+) resonance (R) > (-) inductive (I) effect the quarternary ammonium salt 7-(p-substituted phenyl) carbonyl methyl-3-phenyl-5,6-dihydro imidazo [2,1-b] thiazolium bromide (8) is formed. The reaction of 2 with unsubstituted-phenacyl bromide (R = H), on the other hand, gives 6a and 8a to the similar ratio, respectively.

Hume's Justice as an artificial Virtue (흄의 인위적 덕으로서의 정의)

  • Lee, Nam-won
    • Journal of Korean Philosophical Society
    • /
    • v.141
    • /
    • pp.133-166
    • /
    • 2017
  • The main aim of this paper is to show why justice is based on convention, not nature, in David Hume. Most philosopher, since Aristotle, have considered justice in relation to distribution. This understanding of justice continues up to modern times, and is handled especially in relation to ownership or private property in modern times. In modern times, private property is regarded as an absolute right that should not be violated in any case. Hume identifies this private property with justice. The absolute inviolability of private property is equivalent to never violate to justice. Hume is concerned with the question of where this justice originate. In other words, Hume is not concerned with the Kantian justification of justice, but rather with the psychological discussion of the genesis process of the idea of justice. Hume's answer is that "social utility" is its origin. Public societies are necessary conditions for human being. In other words, if public societies do not exist, humans can not exist. How then can a public society, which is a prerequisite for human being, exist or can be maintained? According to Hume, it is maintained by means of justice. So where is the ground for justice? Hume argues that the basis of justice is not nature, but human conventions. Man accepts justice tacitly and by doing so man can maintains his being. This is a rough insight of Hume. Hume uses a wide variety of concepts to carry out his argument. In this paper, we focus on how the idea of justice in human mind, based on these various concepts presented by Hume, is formed.

Leather's Environment-friendly Adhesion Surface Treatment of shoe's material by Plasma (플라즈마를 이용한 신발소재의 환경 친화적인 접착 표면 처리(I))

  • Ha, Soon-Hee;Jang, U-Jin;Seul, Soo-Duk
    • Journal of Adhesion and Interface
    • /
    • v.6 no.2
    • /
    • pp.6-12
    • /
    • 2005
  • The plasma generally, ionized gas state, is the 4th material state composed the universe. Generating the plasma artificially has been studied by spending energy and it has a lot of applications in human's life. There are several merits to modify the surface of polymer using plasma. Above all, plasma maintains the property of polymer because of it changes the property of surface only. Also, it doesn't use a organic solvent and it is the environment friendship because of there are no waste under processing. Furthemore, in case of high-pressure plasma, it is possible that automated-processing continuously. In this study, we tried the reforming of surface to rise the adhesive strength between the material of polymer, experimented the rising of adhesive strength through a experiment of peel strength by virtue of processing time and using gas, confirmed the change of polymer's surface through measuring the surface contact angle analyzer and scanning electron microscopy (SEM).

  • PDF