• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.127-131
• /
• 2006

본 연구는 VGIS(Virtual Geographic Information System)을 이용, 환경친화적인 도로건설을 위해 실제 좌표를 사용하므로 3차원 도로의 선형과 구조물을 설계하였다. 그리고 시공 중에 발생 할 수 있는 민원문제 및 설계변경 시 효율적인 의사결정 할 수 있도록 하였다. 대상지역은 전라남도 장흥군의 최대 역점사업인 관광을 테마로 한 정남진 가는 길을 컨셉으로 한 '가고 싶은 길', '보고싶은 다리', '기억하고픈 터널'을 주제로 설계하였으며 명실공히 남도의 새로운 관광명소가 될 자연관광도로가 될 것으로 기대된다. 기존의 3차원 설계에서는 평면적인 선형과 구조물의 형상을 이해하는데 상당한 시간이 소요되었지만, 구조물을 3차원으로 설계함으로써, 비전문가라도 구조물을 쉽게 파악할 수 있었다. 그리고 3차원 설계는 기존 구조물과 신설될 구조물 사이에 공사 중 발생할 수 있는 환경 및 민원문제를 사전에 파악할 수 있었다. 또한, 실제와 같이 구현된 도로와 구조물의 시뮬레이션을 통하여 기존의 각종 의사 결정에 있어 보다 시각적 효과를 증진시켜 효율적인 의사결정을 가능하게 하였다. 본 연구에서는 실제 평면 설계에 쓰이는 좌표 값을 3차원설계에 적용하였다. 도로 노선 및 경관분석에 많은 도움이 될 것으로 보이며 VGIS를 이용하므로 도시계획, 식물, 토양, 수로 또는 도로형태, 홍수계획 등 많은 일들이 평가에 사용된다. 여기서는 구조물 3차원 설계에 관한 기초적인 연구를 시행하였으며, 3차원설계를 통해 의사결정 시 효율적인 판단을 할 수 있었고, 환경 친화적 시공 및 설계에 대한 연구가 이루어 져야 될 것으로 판단된다.상의 "일반원칙의 통용"을 계약성립(Formation of Contract)의 과정별로 정리하였다.의 가치, 생활의 편익 등을 증대한다는 믿음 때문이다. 한편 현실은 여러 가지 역기능이 함께 나타나고 있다. '네티즌 윤리강령'까지 선포했지만, 진정한 네티즌 윤리는 강령을 선포했다고 저절로 확립되는 것이 아니다. 네티즌 각자의 실천의지가 있어야 한다. 인류가 새로운 이상향이라고 추구하는 가상사회는 윤리적인 사고와 행동으로 질서를 유지하지 못하면 인류의 밝은 미래는 보장할 길이 없다. 21세기 정보화 사회, 인터넷 사회를 맞이한 우리는 이 세상을 참으로 살기 좋은 세상으로 만들어야 할 고귀한 책무를 안고 있다. 아무리 험한 길, 어려운 과제라 할지라도 그 목표를 잃어서는 안 되며, 그 해답을 얻는 노력을 결코 게을리 해서는 안 된다.기여한 것으로 평가되고 있다. 이들 프로그램은 특히 보조금을 통해 어선의 제3국 영구이전과 낡고 비효율적인 어선의 신조를 가속화시킨 것으로 보고되고 있다.받고 그 의견에 대한 결과를 게시하여 학생들이 제공되기 원하는 식단을 급식 시 제공하여 학생들이 식단선택에 동참할 수 있는 기회를 주는 것이 바람직하겠다. 또한 영양사는 학급의 반대표와의 정기적인 모임을 가짐으로서 학생들의 불만사항 및 개선 요구사항에대해 서로 의견을 교환하여 설문지조사가 아닌 직접적인 대화를 하여 문제점을 파악하고자 하는 적극적인 자세가 필요하겠다. 특히 아침식사의 결식 빈도가 높았고 이는 급식성과에 부정적인 영향을 줄 뿐 아니라 학교에서 제공하는 음식의 섭취정도에도 영향을 주고 있으므로 학생들에게 학부모와 전담교사 및 학교영양사는 학생들에게 이상적

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.238-243
• /
• 2011

In this study, we attempted a structural analysis in order to design a balloon type extracorporeal membrane oxygenator that can induce blood flow without using blood pumps for the purpose of complementing the weakness in the existing extracorporeal membrane oxygenator. To analyze the flow characteristic of the blood flow within the virtual model of extracorporeal membrane oxygenator, computational fluid dynamics(CFD) modeling method was used. The operating principle of this system is to make the surface of the extracorporeal membrane oxygenator keep contracting and dilating regularly by applying pressure load using a balloon, and the 'ime Function Value'that changes according to the time was applied by calculating a half cycle of sine waveform and a cycle of sine.waveform Under the assumption that the uni-directional blood flow could be induced if the balloon type extracorporeal membrane oxygenator was designed as per the method described above, we conducted a structural analysis accordingly. We measured and analyzed the velocity and pressure of blood flow at both inlet and outlet of the extracorporeal membrane oxygenator through CFD simulation. As a result of the modeling, it was confirmed that there was a flow in accord with the direction of the blood by the contraction/dilation. With CFD simulation, the characteristics of blood flow can be predicted in advance, so it is judged that this will be able to provide the most optimized design in producing an extracorporeal membrane oxygenator.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.2
• /
• pp.21-28
• /
• 2018

We present interactive methods for visualizing the cloud height data and the backscatter data collected from ceilometers in the three-dimensional virtual space. Because ceilometer data is high-dimensional, large-size data associated with both spatial and temporal information, it is highly improbable to exhibit the whole aspects of ceilometer data simply with static, two-dimensional images. Based on the three-dimensional rendering technology, our visualization methods allow the user to observe both the global variations and the local features of the three-dimensional representations of ceilometer data from various angles by interactively manipulating the timing and the view as desired. The cloud height data, coupled with the terrain data, is visualized as a realistic cloud animation in which many clouds are formed and dissipated over the terrain. The backscatter data is visualized as a three-dimensional terrain which effectively represents how the amount of backscatter changes according to the time and the altitude. Our system facilitates the multivariate analysis of ceilometer data by enabling the user to select the date to be examined, the level-of-detail of the terrain, and the additional data such as the planetary boundary layer height. We demonstrate the usefulness of our methods through various experiments with real ceilometer data collected from 93 sites scattered over the country.

• Journal of Forest and Environmental Science
• /
• v.34 no.3
• /
• pp.224-234
• /
• 2018

An efficient method to select drought tolerant Korean native plants using in vitro culture system was established in this study. While the plant growths and root inductions of each plant were proportionately affected by concentrations of mannitol on in vitro culturing seven plant species to test tolerance to osmotic stress, growth index (GI) and number of root induction of Chrysanthemi zawadskii var. latilobum and Dianthus chinensis var. semperflorens plantlets were higher than the others in 125mM mannitol. In test with polyethylene glycol (PEG), plantlets of C. zawadskii var. latilobum and D. chinensis var. semperflorens showed higher GI and number of root induction than the others in 33.3mM. On testing whether the well grown plants under osmotic stress are tolerant to virtual drought stress, there were significant differences in the withering rates of C. zawadskii var. latilobum and D. chinensis and those of were Aster yomena and Centaurea cyanus after 12 days without watering. It was found that significantly lower stomata numbers were shown in both drought tolerant plants than the sensitive plants. Averages of the stomata circumferences and the stomata area in the plantlets of the tolerant species were larger than those of the sensitive plants D. chinensis var. semperflorens showed the lowest transpiration level per unit area. The highest stomatal area per unit area was found in C. zawadskii, followed by D. chinensis var. semperflorens, Aster yomena and C. cyanus. In conclusion, C. zawadskii var. latilobum and D. chinensis var. semperflorens were more tolerant to drought than other two species. Furthermore in vitro selection was successfully used to screen drought tolerance species of native plant species.

• 전자공학회논문지 IE
• /
• v.49 no.1
• /
• pp.18-23
• /
• 2012

In this paper, a potable device application for DC-DC converter was designed for voltage protection circuit. Voltage protection circuit to offer the under voltage lock out and over voltage protection consists of a comparator and bais circuits were implemented using. XFAB 1um CMOS process, SPICE simulations was confirmed through the characteristics. Simulation results, under voltage lock out input voltage is 4.8 V higher when the turn-on and, 4.2 V less when turn-off. When the input voltage is low voltage is applied can be used to prevent malfunction of the circuit. Over voltage protection is 3.8 V reference voltage when the output voltage caused by blocking circuit prevents device destruction can be used to improve the stability and reliability. The virtual control circuits of the DC-DC converter connected. According to the results of the abnormal voltage, voltage protection circuit behavior was confirmed. The proposed voltage protection circuit of the DC-DC converter cell is useful are considered.

• Journal of KIISE:Software and Applications
• /
• v.34 no.10
• /
• pp.900-909
• /
• 2007

This paper describes an experiment on the evaluation of human sensibility by monitoring responses to changes In the frequency and amplitude of a tactile display system. Preliminary tasks were performed to obtain effective adjectives concerning texture perception. The number of collected adjectives was originally 33. This number of adjectives was reduced to 14 by a suitability survey that asked whether an adjective is suitable for expressing a texture feeling. Finally after performing a semantic similarity evaluation, the number of adjectives was further reduced to ten and these ten were used in the main experiment. In the main experiment, selected sandpaper types and 15 selected combinations of frequencies and amplitudes of a tactile display were utilized to quantitatively evaluate the ten adjectives using a bipolar seven-point scale. The data show that a relationship exists between the independent variables(frequency, amplitude, and grit site) and the dependent variable(perceived texture). That is, the change of frequency and amplitude is directly related to perceived roughness or essential elements of human tactile sensitivity found in the preliminary experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.552-557
• /
• 2020

The Radar Cross Section (RCS) is a virtual region indicating the strength of a wavelength at which a radar signal is reflected and received. As the ship's RCS represents its own stealth performance and survivability, efforts have been made in various areas from design to construction to reduce the RCS. The RCS can be predicted using design drawings and CAD models, but it is necessary to measure the RCS at sea since sea clutter and multipath reflections occur in the sea environment. However, such RCS predictions and measured values provide only a simple relative magnitude to the user, and there has not been much research on this topic. In this paper, a missile countermeasure technique was studied using 3D RCS measurement data in an operating environment. The elevation and azimuth angle of the ship viewed from the missile were estimated using the location information of the missile, and the RCS value was inverted by mapping it to previously measured 3D RCS measurement data. In addition, by using the movement information of the missile, the RCS observed by the missile could be predicted in advance, and this method can be used to propose a response plan based on the maneuvering and chaff system.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.27-50
• /
• 2016

The present study argues that documentary-animation films, which are based on actual human voices, on the level of representation, constitute a new expansion for the medium of animation films, which serve as testimonies to the real world. Animation films are produced using very diverse techniques so that they are complex to the degree of being indefinable, and documentary films, though based on objective representation, increase in complexity in that there exist various types of artificial interventions such as direction and digital image processing. Having emerged as a hybrid genre of the two media, documentary-animation films draw into themselves actual events and elements so that they conceptually share reality-based narratives and are visually characterized by the trappings of animation films. Generally classified as 'animated documentaries', this genre triggered discussions following the release of , a work that is mistaken as having used rotoscoping transforming live action in terms of the technique. When analyzed in detail, however, this work is presented as an ambiguous medium where the characteristics of animation films, which are virtual simulacra without reality, and of documentaries, which are based on the objective indexicality of the referents, coexist because of its mixed use of typical animation techniques, 3D programs, and live-action images. Discussed in the present study, , , and share the characteristics of the medium of documentaries in that the narratives develop as testimonies of historical figures but, at the same time, are connected to animation films because of their production techniques and direction characteristics. Consequently, this medium must be discussed as a new expansion rather than being included in the existing classification system, and such a presupposition is an indispensable process for directly facing the reality of the works and for developing discussions. Through works that directly use the interviewees' voices yet do not transcend the characteristics of animation films, the present study seeks to define documentary-animation films and to discuss the possibility of the medium, which has expanded as a testimony to the real world.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.5
• /
• pp.443-450
• /
• 2009

Purpose: Conventional image reconstruction uses simplified physical models of projection. However, real physics, for example 3D reconstruction, takes too long time to process all the data in clinic and is unable in a common reconstruction machine because of the large memory for complex physical models. We suggest the realistic distributed memory model of fast-reconstruction using parallel processing on personal computers to enable large-scale technologies. Materials and Methods: The preliminary tests for the possibility on virtual manchines and various performance test on commercial super computer, Tachyon were performed. Expectation maximization algorithm with common 2D projection and realistic 3D line of response were tested. Since the process time was getting slower (max 6 times) after a certain iteration, optimization for compiler was performed to maximize the efficiency of parallelization. Results: Parallel processing of a program on multiple computers was available on Linux with MPICH and NFS. We verified that differences between parallel processed image and single processed image at the same iterations were under the significant digits of floating point number, about 6 bit. Double processors showed good efficiency (1.96 times) of parallel computing. Delay phenomenon was solved by vectorization method using SSE. Conclusion: Through the study, realistic parallel computing system in clinic was established to be able to reconstruct by plenty of memory using the realistic physical models which was impossible to simplify.

• Journal of Korea Water Resources Association
• /
• v.46 no.7
• /
• pp.745-754
• /
• 2013

The systematic analysis and evaluation of required energy in the processes of drinking water production and supply have attracted considerable interest considering the need to overcome electricity shortage and control greenhouse gas emissions. On the basis of a review of existing research results, a practical method is developed in this study for evaluating energy in water supply networks. The proposed method can be applied to real water supply systems. A model based on the proposed method is developed by combining the hydraulic analysis results that are obtained using the EPANET2 software with a mathematical energy model on the MATLAB platform. It is suggested that performance indicators can evaluate the inherent efficiency of water supply facilities as well as their operational efficiency depending on the pipeline layout, pipe condition, and leakage level. The developed model is validated by applying it to virtual and real water supply systems. It is expected that the management of electric power demand on the peak time of water supply and the planning of an energy-efficient water supply system can be effectively achieved by the optimal management of energy by the proposed method in this study.