• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.237-246
• /
• 2021

This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressure depending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the design-X program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large space length at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for the waist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting lines should consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmed that the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length was small in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could be used for 3D virtual garment evaluation.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.347-353
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a suitable basic bodice pattern of Male Sports Athletes by using the 3D virtual twin and virtual garment simulation system. The results were as follows; 1. By using 3D virtual twin and garment simulation, new bodice pattern considered male sports athletes was development. The basic numerical formula were as follows ; surplus of chest girth=9, surplus of back length=1, armhole depth=back length/4+13, half back width=chest girth/5+2.5, front chest width=chest girth/5+3. 2. Wearing test by 3D virtual garment simulation system was useful to evaluate wearing outline, surplus of clothes and garment space. Also it estimated more highly than existing pattern in silhouette and ease amount, confirming that new bodice pattern is appropriate for the male sports athletes. New bodice pattern was evaluated to allow proper space length of chest and waist. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• 문화기술의 융합
• /
• 제4권3호
• /
• pp.191-196
• /
• 2018

본 연구의 목적은 여성 재킷의 실제착의와 컴퓨터 시뮬레이션으로 재현된 가상착의 A, B 간의 차이를 비교분석하여 가상착의 시스템의 개선 방향을 제안하는 것이다. 연구 방법은 아래와 같다. 기본 사이즈 재킷을 입은 표준사이즈의 피험자 사진을 찍고, 피험자 인체사이즈의 아바타에게 재킷을 가상 착의하여 이미지를 얻었다. 여성 재킷 고객 20명에게 이미지를 제시 한 후 설문 조사 방법으로 외관 평가를 실시하였다. 이 외관 평가에서 실제 재킷과 가상 재킷 A간의 일치정도를 비교했고, 실제 재킷과 가상 재킷 B간의 일치정도를 비교했다. 그 후 실제착의/가상착의 A와 실제착의/가상착의 B간의 외관 평가 차이를 t-test하였다. 그 결과 원단에 대한 1개 항목, 앞면에 대한 9개 항목, 옆면에 대한 3개 항목, 뒷면에 대한 6개 항목에서 외관 평가에 대한 차이가 있었다.

• 한국멀티미디어학회논문지
• /
• 제15권7호
• /
• pp.941-950
• /
• 2012

본 연구에서는 PC상에서 인체 3차원 데이터에 상하의 의류를 중첩 착의하는 가상 착의 시스템을 소개한다. 이를 위하여, 레이저 스캔 방식으로 얻은 인체 3차원 데이터와 의류 앞뒷면의 모습을 촬영하여 얻은 의류 디지털 데이터를 이용한다. 2차원의 앞뒷면 의류 디지털 데이터에는 의류 소재 내 질점 간의 장력이 반영되었고, 인체 데이터에의 착의 과정에는 마찰력과 중력을 적용해 주었다. 하의 착용 시에는 마찰력과 중력에 추가적으로 혁대 개념을 도입하여 흘러내리는 의류를 고정하였고, 하의를 착의한 인체데이터위에 상의를 착의하는 중첩 착의 방법을 제시하였다. 본 시스템이 지닌 장점은 복잡한 패턴을 이용하여 착의하는 다른 연구와 달리, 의류의 앞뒷면만을 이용하여 착의하면서도 현실감은 뒤지지 않는다는 것에 있다. 현재 의류전자상거래 시 의류의 앞뒷면만을 전시하여 판매하는 방법과 유사한 방식으로 온라인 판매가 이루어지나, 착의 모습을 제공할 수 없는 기존 방식과 달리 3차원의 착의 모습까지 제공하게 되어, 의류 판매의 방식을 바꾸게 할 것으로 기대한다.

• 복식문화연구
• /
• 제19권2호
• /
• pp.245-254
• /
• 2011

The purpose of this study was to develop uniform pattern of obese junior-high school girls by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, by using 3D virtual garment simulation, new uniform pattern considered obese junior-high school girls was development. The basic numerical formula were as follows; bust girth=B/2+2.5, armhole depth=B/4, front waist girth=W/4+1.8, back waist girth=W/4+1, front hip girth=H/4+1, back hip girth=H/4+1, chest width=chest width+1.5, back width=back width+1 and back neck width 8cm. Second, according to the results of the new uniform pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new uniform pattern is appropriate for the obese junior-high school girls. Also, new uniform pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• 한국의류산업학회지
• /
• 제12권1호
• /
• pp.86-93
• /
• 2010

The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• 한국의류산업학회지
• /
• 제24권3호
• /
• pp.315-324
• /
• 2022

This study aims to verify the sewing technology and the expression of the virtual garment program by comparing the appearance similarity between the real and the virtual power shoulder jacket. To this end, the H and the X silhouettes of the power shoulder jacket were selected as the reference designs. After making the reference designs into real jackets by applying the human body dimensions of women in their twenties, virtual avatars and jackets were produced using CLO 3D programs. The results showed that the H-type with only expanded shoulders and less design variation had a high similarity between the reference photo and real garment, the real and virtual garment, and the reference photo and virtual garment. The power shoulder jacket of the reference picture was well reproduced in the real and virtual garments. Conversely, the X-type jacket, which is a tight fit and has many design variations, showed somewhat low similarity in the circumference items and the basic construction line. Especially in tight-fitted power shoulder jackets, the fact that shoulder angles and the essential items for pattern making cannot be reflected in reproducing virtual models was found to be a limitation in increasing the similarity of virtual clothing. Furthermore, the sewing system gap between the real and the virtual clothing exposed a difference in the appearance of virtual clothing.

• 한국지역사회생활과학회지
• /
• 제23권2호
• /
• pp.189-198
• /
• 2012

This study aim was to understand the effects of the change of the sleeve cap height on the sleeve cap line and the sleeve appearance by making nine different sleeve cap height patterns. When a subject sews the virtual and real garments with this, it provides data base through which she can make the suitable sleeve by conducting a comparative analysis of the appearance and cross-sectional diagram and grasping the relation between the sleeve cap line ease and the shape of the sleeve. As a result of the analysis of the image of 3D virtual garment, the shape of the armscye and the position of the bust line and sleeve baseline, the sleeve cap height and the sewing ease of the sleeve cap line affect on the shape of the sleeve and the armscye. Although the real garment is slightly different from the virtual garment they have shown similar tendency. Therefore, if the 3D virtual clothing system is used appropriately, it is possible to expect various study results in the apparel field without making real garments.

• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.59-66
• /
• 2019

The purpose of this study was to develop slacks pattern of elderly women aged over 60s by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, By using 3D Virtual Garment Simulation, new slacks pattern considered elderly women was development. The basic numerical formula were as follows, front waist girth W/4+2+1.5, back waist girth W/4+1.5+0.5, front hip girth H/4+0.75, back hip girth H/4+1.5, front crotch extension H/16-0.5, back crotch extension H/8-1.3, front dart amount 2 and back dart amount 1.5. Second, according to the results of the new slacks pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new slacks pattern is appropriate for the elderly women. Also, new slacks pattern was evaluated to allow proper space length of waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.607-613
• /
• 2012

This study develops a Hanbok Jeogori pattern for middle-aged women with a 3D virtual-twin and virtual-garment simulation system. The including criteria for subjects in this study was a focus on women in their 50s, and a total of 345 females satisfying them were enrolled for 3D virtual model. Comparative Jeogori pattern, Baik & Choi's(2004) pattern, was selected for the development of Jeogori pattern. The results were: first, a new Jeogori pattern considerate of middle-aged women was developed. The basic numerical formula were: Front and back bust girth B/4+1.5, armhole depth B/4, sleeve width B/4, goedae width B/10-1.5 and git width 5.5. Second, according to the results of the new Jeogori patterns appearance evaluation, the new Jeogori pattern scored higher than the existing pattern in silhouette and ease amount, this confirmed that the new Jeogori pattern is appropriate for middle-aged women. Virtual models of production through data from 3D body scan, pattern draft, and virtual garment digital program were applied to a prototypic design method to enhance the fitness of ready-made Hanbok garments. This study serves as important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns and for the future 3D Pattern Production Program development of Hanbok patterns.