• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1575-1581
• /
• 2019

Due to the mismatched line impedance among distributed generation units (DGs) and uncontrolled harmonic current, the droop controller has a number of problems such as inaccurate reactive power sharing and voltage distortion at the point of common coupling (PCC). To solve these problems, this paper proposes a resistive-capacitive virtual impedance control method. The proposed control method modifies the DG output impedance at the fundamental and harmonic frequencies to compensate the mismatched line impedance among DGs and to regulate the harmonic current. Finally, reactive power sharing is accurately achieved, and the PCC voltage distortion is compensated. In addition, adaptively controlling the virtual impedance guarantees compensation performance in spite of load changes. The effectiveness of the proposed control method was verified by experimental results.

• Korean Journal of Optics and Photonics
• /
• v.30 no.6
• /
• pp.237-242
• /
• 2019

A compact virtual-reality (VR) device with wider field of view provides users with a more realistic experience and comfortable fit, but VR lens distortion is inevitable, and the amount of distortion must be measured for correction. In this paper, we propose two different full-field distortion-measurement methods, considering the characteristics of the VR device. The first is the distortion-measurement method using multiple images based on camera calibration, which is a well-known technique for the correction of camera-lens distortion. The other is the distortion-measurement method by measuring lens distortion at multiple measurement points by rotating a camera. Our proposed methods are verified by measuring the lens distortion of Google Cardboard, as a representative sample of a commercial VR device, and comparing our measurement results to a simulation using the nominal values.

• Journal of Fashion Business
• /
• v.25 no.5
• /
• pp.73-87
• /
• 2021

This study aimed to develop fashion designs by applying the PO (Provocative Operation) method as a 3D virtual clothing program and to derive the PO application method in fashion design. The first T-shirt design was presented as an existing thinking method, and the second design was developed by applying escape, reversal, exaggeration, distortion, and hopeful thinking techniques, which are techniques for 'provocation' of the PO method, to the first design. Thus, 18 T-shirt designs were developed as 3D virtual clothing, with 3 sets of 6 designs, including the 1st and 2nd designs. The method of using the 'provocation' techniques of the PO method in the development of fashion design derived from this was as follows. First, the 'escape' technique was designed in such a way that a part of the detail or structure was deleted, or a part of the structure or expression element of another item was applied. Second, the 'inversion' technique was expressed by inverting the position or shape of a detail or structure up, down, left, and right; fitting the structural detail or reversing the shape; or converting the structure and form. Third, the 'exaggeration' technique exaggerated the size, length, and volume of a structure's form or detail. Fourth, the 'distortion' technique was expressed as a distortion of lines or shapes or a visual distortion using the Trompe l'oeil technique. Fifth, the 'hopeful thinking' technique was developed and expressed from the idea of an hypothetical 'if' it was absurd, irrational, and unrealistic.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.917-933
• /
• 2016

In a prestressed concrete bridge, the magnitude of the prestress force (PF) decreases with time. This unexpected loss can cause failure of a bridge which makes prestress force identification (PFI) critical to evaluate bridge safety. However, it has been difficult to identify the PF non-destructively. Although some research has shown the feasibility of vibration based methods in PFI, the requirement of having a determinate exciting force in these methods hinders applications onto in-service bridges. Ideally, it will be efficient if the normal traffic could be treated as an excitation, but the load caused by vehicles is difficult to measure. Hence it prompts the need to investigate whether PF and moving load could be identified together. This paper presents a synergic identification method to determine PF and moving load applied on a simply supported prestressed concrete beam via the dynamic responses caused by this unknown moving load. This method consists of three parts: (i) the PF is transformed into an external pseudo-load localized in each beam element via virtual distortion method (VDM); (ii) then these pseudo-loads are identified simultaneously with the moving load via Duhamel Integral; (iii) the time consuming problem during the inversion of Duhamel Integral is overcome by the load-shape function (LSF). The method is examined against different cases of PFs, vehicle speeds and noise levels by means of simulations. Results show that this method attains a good degree of accuracy and efficiency, as well as robustness to noise.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.133-142
• /
• 2020

In this research, we describe the method of implementing a 360-degree panorama using one projector, in terms of hardware and in the production of projected pre-distortion images. We propose a method of installing a projector and a reflector on the central ceiling of the space to minimize the shadows generated based on the position of the spectators. We used a virtual camera and virtual space where the projector and hemisphere positions were set to the same as in the exhibition space in Unity. After the image projected on the screen was mapped on the wall of the virtual space, the pre-distortion image was created by the method of capturing from the virtual camera using the ray tracing technique. When the produced pre-distortion image is hemispherical reflected and projected by the projector installed at the same position as the virtual camera, the image is reflected and projected 360 degrees on the panoramic screen.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.454-460
• /
• 2019

In this paper, a watt-level 2.4-GHz RFCMOS linear power amplifier (PA) with pre-distortion method using variable capacitance with respect to input power is demonstrated. The proposed structure is composed of a power detector and a MOS capacitor to improve the linearity of the PA. The pre-distortion based linearizer is embedded in the two-stage PA to compensate for the gain compression in the amplifier stages, it also improves the output P1dB by approximately 1 dB. The simulation results demonstrate a 1-dB gain compression power of 30.81 dBm at 2.4-GHz, and PAE is 29.24 % at the output P1dB point.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1235-1244
• /
• 2018

The application of shunt capacitor banks and underground cables typically induces resonance in power distribution systems. In this study, the propagation of resonance in a microgrid (MG) with inverter-based distributed generators (IBDGs) is investigated. If resonances are not properly damped, then the output current of the inverters may experience distortion via resonance propagation due to the adverse effect of resonances on MG power quality. This study presents a conceptual method for identifying resonances and related issues in multi-inverter systems. For this purpose, existing resonances are identified using modal impedance analysis. However, some resonances may be undetectable when this method is used. Thus, the resonances are investigated using the proposed method based on the frequency response of a closed-loop MG equivalent circuit. After analyzing resonance propagation in the MG, an effective virtual impedance damping method is used in the IBDG control system to damp the resonances. Results demonstrate the effectiveness of the proposed method in compensating for existing resonances.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.891-898
• /
• 2014

The DVC (Distributed Video Coding) provides a theoretical basis for the implementation of light video encoder. Conventionally, lots of studies have been focused on the codec scheme of Stanford University that has a feedback channel to control the bit rate finely. However, the codec scheme can not evaluate the qualities of the frames reconstructed by the received parity bits at the decoder side. This paper presents an efficient method of estimating distortion by correcting the virtual channel noises in side information and then facilitating the measurements of the visual qualities. Through several simulations, it is shown that the proposed method is very efficient in estimating the visual qualities of the reconstructed WZ frames.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.49-56
• /
• 2002

Many users of 3D virtual city are Utilize a texture image for the cognition of real object. In this study, building's facet images were achieved by a digital camera and adjusted its distortion by use of the 2D projective transformation method. After then, Images are mapped to a 3D building model by means of the OpenGL. Application program is able to offer an automation solution to construction process of the 3D virtual city.

• Structural Engineering and Mechanics
• /
• v.2 no.1
• /
• pp.113-123
• /
• 1994

A method for computing the elastic buckling prestressing force of a post-tensioned composite steel-concrete tee-beam is presented. The method is based on a virtual work formulation, and incorporates the restraint provided by the concrete slab to the buckling displacements of the steel beam. The distortional buckling solutions are shown to be given by a quadratic equation. The application of the analysis to calculation buckling strengths is given, based on codified rules for beam-columns. Conclusions are then drawn on the importance of distortional buckling when a post-tensioned composite beam is stressed during jacking.