• 한국재료학회지
• /
• 제16권3호
• /
• pp.145-150
• /
• 2006

Various colors of light emitting diodes(LED) and four-band white light sources are obtained using a violet LED and various phosphor films. $BaMg_2Al_{16}O_{27}:Eu\;(blue),\;SrGa_2S_4:Eu\;(green),\;and\;Eu(TTA)_3(PTA)$ (red) phosphors are dispersed in poly-vinyl-alcohol aqueous solutions, and phosphor films are prepared by coating the suspensions to PET film. The narrow band emission of $Eu(TTA)_3(PTA)$ phosphor has excellent red luminescent property for four-band white light excited by the violet LED.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.235-238
• /
• 2003

기존 LED display는 서로 다른 구동전압과 열화특성을 갖는 적색, 녹색, 청색 LED를 이용하여 픽셀을 구성하므로 제어회로의 구성이 복잡하고, 동작시간의 경과에 따라 색깔 별로 디스플레이 특성이 변하게 되어 full color display를 추구하는데 큰 문제점으로 지적된다. 이러한 문제점을 해결하기 위하여 짝은 파장을 갖는 LED 칩을 여기광원으로 하고, 이 칩 위에 적색, 녹색, 청색형광체를 혼합하여 에폭시와 골고루 섞어 도포하도록 고안한 LED 램프에 대하여 연구하였다. 제작한 여기광원의 활성층은 InGaN으로 구성되어 있으며 중심파장이 408 nm, FWHM 이 13 nm, CIE 색도좌표값이(0.198, 0.087)이다. 형광체와 첨가하는 에폭시의 질량비를 조절하여 백색 LED 램프를 구현하였으며, 질량비에 따라 LED 램프의 CIE 색도좌표가 변하는 것을 확인하였다.

• 대한화학회지
• /
• 제47권4호
• /
• pp.370-375
• /
• 2003

보라색 발광 다이오드에 의해 여기되어 청색, 녹색, 적색을 발광하는 형광체로 각각 $BaMg_2Al_16O_27:Eu,\SrGa_2S_4:Eu$, ZnCdS:Ag,Cl 형광체를 선택하였다. 보라색 발광 다이오드의 발광에서 형광체에 의해서 완전히 흡수되지 않고 나오는 보라색 발광과 $BaMg_2Al_16O_27:Eu,\SrGa_2S_4:Eu$, ZnCdS:Ag,Cl 형광체에서 나오는 청색, 녹색, 적색 발광을 조합하여 사파장 백색 발광 다이오드를 만들었다. 사파장 백색 발광 다이오드의 발광 특성을 확인하였다.

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.267-272
• /
• 2006

일련의 $Sr_{1-x}Ca_xGa_2S_4:Ce,Na$ 형광체를 고상법으로 합성하였다. $Sr_{1-x}Ca_xGa_2S_4:Ce,Na$의 구조와 발광 특성을 조사하였다. $Sr_{1-x}Ca_xGa_2S_4:Ce,Na$은 보라색 발광 다이오드의 발광 파장인 400 nm에서 강한 흡수가 있다. $SrGa_2S_4:Ce,Na$의 발광 봉우리는 448 nm와 485 nm에 있다. $Sr_{1-x}Ca_xGa_2S_4:Ce,Na$에서 Sr이 Ca으로 부분 치환되면 발광 파장이 장파장으로 이동된다. 다파장 백색 LED를 제작할 때 $Sr_{1-x}Ca_xGa_2S_4:Ce,Na$은 보라색 LED로 여기하여 청색 발광 형광체로 사용 될 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.7.1-7.14
• /
• 2022

Objectives: This study evaluated the bleaching efficacy of different in-office protocols associated with violet light emitting diode (V-LED), and measured the pulpal temperature rise caused by V-LED with or without gel application. Materials and Methods: Bovine incisors were distributed in 4 groups (n = 10): VL - V-LED; HP - 35% hydrogen peroxide (control); HYB - hybrid protocol, V-LED applied without gel for 10 irradiation cycles followed by V-LED applied with gel for another 10 irradiation cycles; and HPVL - gel and V-LED applied for 20 irradiation cycles. Three bleaching sessions were performed with 7-day intervals. Bleaching efficacy was evaluated with ΔE_ab^*, ΔE₀₀ and ΔWI_D. Data were recorded at baseline, 7, 14, 21 and 70 days. For pulpal temperature rise, thermocouples were placed inside the pulp chamber of human incisors. To determine intrapulpal temperature, the teeth were irradiated with V-LED with or without application of bleaching gel. Color difference data were analyzed by 2-way repeated measures ANOVA and Tukey's test. Pulpal temperature was analyzed by t-test (α = 5%). Results: VL exhibited lower color (ΔE_ab^* and ΔE₀₀) and whiteness changes (ΔWI_D) than the other groups. HPVL presented higher color change values than HYB. HYB and HPVL showed not different ΔWI_D values; and HP showed the highest whiteness changes at all times. There were significant differences comparing ΔT with gel (8.9℃) and without gel application (7.2℃). Conclusions: HPLV was more efficient than HYB. The 2 protocols with VL showed similar results to control. Gel application combined with VL promoted higher pulpal temperature than to the no gel group.

• Environmental Engineering Research
• /
• 제18권1호
• /
• pp.21-28
• /
• 2013

In this study, the applicability of visible light-emitting-diodes (LEDs) to the photocatalytic degradation of indoor-level trichloroethylene (TCE) and perchloroethylene (PCE) over N-doped $TiO_2$ (N-$TiO_2$) was examined under a range of operational conditions. The N-$TiO_2$ photocatalyst was calcined at $650^{\circ}C$ (labeled N-650) showed the lowest degradation efficiencies for TCE and PCE, while the N-$TiO_2$ photocatalysts calcined at $350^{\circ}C$, $450^{\circ}C$, and $550^{\circ}C$ (labeled as N-350, N-450, and N-550, respectively) exhibited similar or slightly different degradation efficiencies to those of TCE and PCE. These results were supported by the X-ray diffraction patterns of N-350, N-450, N-550, and N-650. The respective average degradation efficiencies for TCE and PCE were 96% and 77% for the 8-W lamp/N-$TiO_2$ system, 32% and 20% for the violet LED/N-$TiO_2$ system, and ~0% and 4% for the blue LED/N-$TiO_2$ system. However, the normalized photocatalytic degradation efficiencies for TCE and PCE for the violet LED-irradiated N-$TiO_2$ system were higher than those from the 8-W fluorescent daylight lamp-irradiated N-$TiO_2$ system. Although the difference was not substantial, the degradation efficiencies exhibited a decreasing trend with increasing input concentrations. The degradation efficiencies for TCE and PCE decreased with increasing air flow rates. In general, the degradation efficiencies for both target compounds decreased as relative humidity increased. Consequently, it was indicated that violet LEDs can be utilized as energy-efficient light sources for the photocatalytic degradation of TCE and PCE, if operational conditions of N-$TiO_2$ photocatalytic system are optimized.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.931-937
• /
• 2012

In this study, we assessed environmental impacts of compound humidifiers using environmental life cycle assessment and presented the ways to improvements in energy consumption of them. We found eco-design parameters and $CO_2$-eq emissions in each stage of raw material acquisition, manufacturing, transportation, use and disuse in life cycle of the compound humidifiers. The highest $CO_2$ emission is found to be in the stage of use among all stages of life cycle, which is mainly due to power consumption in thermal heating of heating coil for sterilization during humidification. The power consumption and $CO_2$ emission in the stage of use can be reduced to 1/4 and 1/3 at the highest estimate through improvement of sterilization method, respectively. We suggested the replacement of conventional thermal heating coil by ultra violet light-emitting diodes (UV-LED) for sterilization and then presented the experimental results on the sterilization effects of UV-LEDs.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.15-20
• /
• 2014

Recently, LED (Light Emitting Diode) application research is studying by using a specific wavelength. LED plant factory produced a lot of green plants in a closed spaces, so it should be taken to guard against harmful microbes. Until today, a lot of studies for green plant production in plant factory is proceed but there were no study on harmful microbes in plant factory. Thus, the analysis on sterilization for harmful microbes in plant factory were experimented using UV (Ultra Violet) LED with 282nm of wavelength. As a results on sterilization of three harmful microbes, 50% of sterilization efficiency was achieved after 2.5 hours, 97% was achieved after 12 hours of UV LED irradiation, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제12권3호
• /
• pp.382-388
• /
• 2002

In order to assess the effects of organic fertilizer on soil microbial community structure and diversity in the greenhouse fields, fatty acid methyl ester (FAME) was analyzed by the MIDI (Microbial ID, Inc., Newark, DE, U.S.A.) system and enumerations were performed. In relation to bacterial division of each sample, low GC Gram-positive bacteria were predominant among bacteria cultured on aerobic bacteria media. On the other hand, alpha subdivision was predominant on proteobacteria of control and OM (organic matter) 1 treated plot, and Flavobacterium spp. existed in OM2 plot on crystal violet media of all samples. Shannon-weaver Index (H) of OM1 plot varied most by 1.9 and 5.0 among bacteria cultured on aerobic bacteria media and crystal violet media, respectively. Our results revealed that addition of the organic wastes to soil led to a highly diverse microbial community, but the excessive amounts of organic and mineral fertilizer applied in the greenhouse fields produced excess nutrients in soil and led to simplification on bacterial populations.

• E2M - 전기 전자와 첨단 소재
• /
• 제13권1호
• /
• pp.11-18
• /
• 2000

최근 10여년 사이에 III-nitride 화합물 반도체가 전 세계적으로 주목을 받고 있다. 이는 질화물의 조성에 따라 자외선 영역에서 가시 광선의 전 파장, 측 자색에서 적색 영역대의 광소자 및 고온 고출력 전자소자에 쓰일 수 있기 때문이다. 지금까지 고휘도의 청색, 녹색 LED(Light Emitting Diode)는 상용화되어 있어, UC LD(Ultra-Violet Laser Diode)는 10,000 시간 상온 연속 발진에 성공하여 상용화의 단계에 이르고 있다. 그러나 많은 연구 투입에 비례하여 얻어지는 결과물의 효율은 그리 높지 않은 분야로 LED를 수준 급으로 상용화하는 곳은 세계에서 5개정도로 국한되면, 그 기술이 전파됨이 그리 쉽지 않다. LD(laser Diode)의 경우 상용화 초기 단계로 보편적 신뢰성을 확보하기까지는 또 다른 breakthrough 확보가 필요하며, 궁극적인 기술 전개는 기판을 해결하는 것에서 올 수 있다. 본 논문에서는 이러한 III-nitride 반도체 소자 개발을 가능하게 한 MOCVD(Metaloganic Chemical Vapor Deposition) 결정 성장 방법과, 기존에 사용화 되어 있는 LED 소자 특성 및 국내외 개발 동향 및 향후 발전 방향을 소개하고자 한다.