• Korean Journal of Organic Agriculture
• /
• v.12 no.3
• /
• pp.345-352
• /
• 2004

This study was carried out to investigate the effect of soil-born microorganism, vitabio on growth of leaf lettuce in the vinyl house. Total weights of leaf lettuce treated with vitabio showed difference compared with untreated leaf lettuce. Sugar content was also increased. Mineral contents of leaf lettuce showed no difference between treated with vitabio and untreated with vitabio. Exchange Capacity (EC) and Organic Matter (OM) in chemical properties of soil treated with vitabio showed higher than soil in untreated vitabio. Vitabio treated soil contained much more microorganisms such as Bacteria, Actinomycetes, Hyphomycetes, Bacillus sp. Pseudomonas sp. after harvest.

• Elastomers and Composites
• /
• v.32 no.1
• /
• pp.11-19
• /
• 1997

[ ${\gamm}-Glycidoxy$ ] propyl trimethoxy silane, CTBN rubber(carboxyl terminated butadiene acrylonitrile rubber) and GMA(glycidyl methacrylate) were reacted on the surface of silica one by one in existence of TEA(triethylamine) or BPO(benzoyl peroxide). The amount of reactant was $2.5{\sim}5.8%$ of treated silica weight. The treated silica was mixed with epoxy resin and MTHPA(methyl tetrahydro phthalic anhydride) in the range of $0{\sim}60%$(wt.%) of total component. The thermal properties were tested for cured products. By using silica treated with silane/rubber or silane/rubber/vinyl, comparing with 3% of rubber mixed directly, it had 13% higher $T_g$ and 10% lower thermal expansion coefficient at $35{\sim}55%$ of silica contents.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.231-236
• /
• 1998

In general, the drying shrinkage of polymer-modified mortars using redispersible polymer powders is much higher than that of unmodified mortar. The purpose of this study is to reduce the drying shringkage of polymer-modified mortars using a redispersible poly(ethylene-vinyl acetate) (EVA) powder, which is widely used for the manufacture of prepackaged-type polymer-modified mortar products at present. Polymer-modified mortars using the redispersible EVA powder with powdered shrinkage-reducing agent were prepared with various polymer-cement ratios and shrinkage-reducing agent contents, and tested for drying shrinkage and strength. From the test results, the drying shrinkage of the redispersible EVA powder-modified mortars with a powdered shrinkage agent is remarkably reduced with increasing shrinkage-reducing agent content, and becomes approximately a half of that of the redispersible EVA powder-modified mortars with the same polymer-cement ratios and without the shrinkage-reducing agent at a shrinkage-reducing agent content of 6%.

• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.65-71
• /
• 1995

Wool yarns were treated in dimethylformamide solutions containing various concentrations of three dibasic acid anhydrides : succinic, itaconic, and phthalic anhydrides in various conditions. The structural aspects of these dibasic acid anhydrides are different : the succinic, itaconic, and phthalic acid anhydrides have saturated aliphatic etylene, unsaturated aliphatic vinyl and aromatic phenyl groups, respectively. The reaction mechanism of the acylation of wool keratin and some resction conditions were invastigated. And the results are as follows. 1. The N-acylation and formation of free carboxyl group were dominant rather than the O-acylation cross-linked on the side chain of polypeptide. The acylation of wool keratin is easier than that of silk fibroin. 2. The higher molecular weight, steric hinderance and resonance caused lower acylating reactivity. By the determination of acyl contents for acylated keratin, it was rerealed that the degree of acylation was succinic acid anhydride > itaconic acid anhhydride > phthalic acid anhydride.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1573-1574
• /
• 2009

Fullerene/polystyrene nanoparticles having the average size of 300 nm ~ 1 ${\mu}m$ were prepared by emulsion polymerization in aqueous medium. Poly(vinyl pyrrolidone) and potassium persulfate were used as a dispersant and an initiator, respectively. The contents of fullerene in the nanoparticle were controlled to be from 10 to 57 wt% by varying the feed ratio, which was confirmed by IR-spectroscopy, thermogravimetric analyses, and elemental analyses. Dynamic light scattering experiments revealed the particles have a broad size distribution. Further characterizations of the nanoparticles were performed by using SEM and TEM observation. The high content of fullerene in the particles will find applications in photovoltaic and organic semiconducting area.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.591-593
• /
• 2003

Silicone composites for high voltage insulator(HVI SC) were prepared by adding aluminum trihydrate(ATH) treated by surface treatment agent to base silicone compound at the ratio of 100:20, 100:40, 100:60, 100:80, and 100:100, respectively. And also, ATH was treated by various surface treatment agents, such as stearic acid, acryl silane vinyl silane under compounding process. electrical properties were investigated for the various contents of ATH and solace-treatment agents we mlas ured volume resistivity, breakdown and tracking resistance were for HVISC containing ATH treated by viuyl silane.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.127-128
• /
• 2005

UV-curable pressure sensitive adhesives were prepared by blending acrylic copolymer, copolymerized with butyl acrylate (BA), acrylic acid (AA) and vinyl acetate (VAc) by solution polymerization, triethyl amine (TEA) and trimethylolpropane triacrylate (TMPTA). The PSAs were evaluated by peel strength with varying contents of TMPTA and UV dose, and also glass transition temperature($T_g$) of PSAs were measured. When exposed on UV irradiation, the PSAs showed the decreased peel strength and increased $T_g$. And following UV irradiation, the PSAs did not leave any residue on wafer after peel off PSA.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.298-304
• /
• 2006

Blends of poly (acrylic acid-co-maleic acid)(PAM) with poly (vinyl alcohol)(PVA) were obtained by solution blending. The blends were solvent-on to a film to examine thermo-mechanical properties and gas permeability. The transition temperatures $(T_g\;and\;T_m)$ of the blends remained constant regardless of PAM contents. However, the values of enthalpy changes corresponding to melting transition $({\Delta}H_m)$ and initial degradation temperature $({T_D}^i)$ were decreased with increasing PAM content. The values of ultimate strength and initial modulus gave the maximum value at the 12 wt% PAM then decreased with further increase of PAM content up to 15 wt%. To measure the gas permeability of the PVA/PAM blend films, the PVA blend solutions were coated onto both biaxially oriented propylene (BOPP) and poly (ethylene terephthalate)(PET) films. The oxygen transmission rate $(O_2\;TR)$ permeability values mono- tonically decreased with increasing PAM content. However, moisture vapor transmission rate was not affected by PAM content.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.299-305
• /
• 2011

This study deals with the preparation of polymeric electrolyte membranes having high durability for the application of fuel cells. The membranes under investigation were prepared the impregnation to porous polyethylene membranes with poly(vinyl alcohol)(PVA), poly(styrene sulfonic acid-co-maleic acid), and (PSSA-MA)3-(trihydroxysilyl)-1-propanesulfonic acid (THS-PSA). To characterize the resulting membranes, the water contents, the contact angles, FT-IR, the proton conductivity and the the modulus were measured. The proton conductivity of 30% content of THS-PSA at $55^{\circ}C$ gave excellent $1.27{\times}10^{-1}S/cm$ and the mechanical strength was improved 7 times higher up to the THS-PSA content 15%, as a result, the durability was elevated extensively.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.151-158
• /
• 2013

The effect of layered double hydroxides (LDH) on the gas separation properties of ethylene vinyl acetate copolymer was investigated. Mg-Al LDH/EVA nanocomposite membranes were prepared from solution intercalation using organically modified LDH (DS-LDH). Dodecyl sulfate (DS)-LDH was obtained by the intercalation of DS anion in the interlayer. The nanocomposite structure has been elucidated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). XRD pattern clearly shows that the DS-LDH layers are disorderly well dispersed in the EVA matrix. The maximum tensile strength and elongation of the LDH/EVA nanocomposite membrane were found with the LDH content 3 wt%. The thermal properties of nanocompostie membrane were enhanced by the incorporation of LDH in EVA matrix. Gas permeation of LDH/EVA nanocomposite membranes with LDH contents of 1, 3, 5 wt% was studied for $O_2$ and $CO_2$ single gases. The presence of 3 wt% LDH decreased $O_2$ permeability by up to 53% compared to the EVA membrane. In spite of barrier property of nanocomposite membrane, however, the gas permeability for $CO_2$ was increased due to its strong affinity with the residual OH groups on the LDH.