• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.521-527
• /
• 2001

The miscibility, molecular interaction and tensile properties of the blends of poly (${\varepsilon}$-caprolactone) (PCL) with poly(vinyl chloride) (PVC) have been studied. The measured glass transition temperature values of PCL/PVC blends were found to be well fitted by Fox equation. We found that PCL/PVC blends are amorphous up to 23% PCL content. The blends showed the highest Young's modulus and yield strength at 5% PCL content and the highest tensile strength at 11% PCL content. The blends with low contents of PCL(up to 13%) show increased tensile strength and decreased elongation of PCL/PVC blends. Consequently, the antiplasticization phenomenon is observed in the PCL/PVC blends.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.316-325
• /
• 2003

The blends of waste-polyethylene (W-PE)/waste-ethylene vinyl acetate copolymer (W-EVA) with inorganic and phosphorous flame retardants (i.e., aluminium hydroxide, magnesium hydroxide, and so on) were prepared by melt mixing techniques at different compositions and foamed. The flame retardancy and foaming properties of the blends, limiting oxygen index (LOI), heat release rate (HRR), carbon monoxide yield (COY), total heat release (THR), effective heat of combustion (EHC), expandability and cell structure were investigated using cone calorimeter, SEM, LOI tester and polarizing microscope. When the composition ratios of the W-PE/W-EVA blends were 50/50 (w/w), and the ranges of the flame retardants contents were $175{\sim}220 phr$, we could obtain foams with the uniform and closed cell, high expandability (1900 % or more), high LOI, and low HRR values. These results depend on crosslinking and loaming conditions, a char formation and smoke suppressing effect. Aluminium hydroxide had more effect in the increase of LOI than magnesium hydroxide, while magnesium hydroxide considerably affected the decrease of HRR and COY.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.540-546
• /
• 2010

In this manuscript, in order to reduce methanol permeability and, at the same time, to increase proton conductivity THS-PSA containing silica compound, responsible for methanol permeability reduction, and sulfonic acid, responsible for proton conductivity enhancement, was applied onto PVA/PSSA-MA membranes. And in order to improve durability, the resulting membranes, PVA/PSSAMA/THS-PSA, were exposed to 500ppm F2 gas at varying reaction times. The surface-fluorinated membranes were characterized through the measurement of contact angles, thermo-gravimetric analysis, and X-ray photoelectron spectroscopy to observe the physico-chemical changes. For the evaluation of the electro-chemical changes in the resulting membranes, its water contents, ion exchange capacity, proton conductivity, and methanol permeability were measured and then compared with the commercial membrane, Nafion 115. Finally, the membran electrode assembly(MEA) was prepared and the cell voltage against the current density was measured. As fluorination time increased, the contents of F2 increased up to maximum 4.3% and to depth of 50 nm. At 60 min of fluorination, the proton conductivity was 0.036 S/cm, larger than Nafion 115 at 0.024 S/cm, and the methanol permeability was $9.26E-08cm^2/s$, less than Nafion 115 at $1.17E-06cm^2/s$.

• Journal of Environmental Science International
• /
• v.28 no.12
• /
• pp.1061-1069
• /
• 2019

Common reed (Phragmites australis) is widespread in reclaimed land and wetland habitats. Every year, the common reed produces extensive colonies by means of underground rhizomes and ground-surface stolons. From an agricultural point of view, the common reed's large biomass is a good material for supplying organic matter. However, it has not yet been studied in terms of seedling production, transplanting conditions, and decomposition characteristics in reclaimed land. Seeds were harvested from the native common reed in Saemangeum, South Korea, the previous year and stored on an open field. The seeds were sowed in the greenhouse at the beginning of April. Common reed decomposition was studied from June to September, with the use of coarse mesh (5 mm) stem litterbags, on three samping dates and with five replicate packs per sample. These packs were dug in five soil condition (low-salinity topsoil, subsoil, high-salinity topsoil, subsoil, paddy topsoil) to 0.2 m and 0.4 m depth. The highest germination rate of common reed seeds was observed in non-salt solution, but the exhibited germination rate was 70% at 9.38 dS m^-1. The plant height of young reed decreased steadily with increasing salinity, but leaf number did not decrease by 9.38 dS m^-1. The survival rate of the two-year-old reed was 83.3%, which was 35% higher than that of the one-year reed. The transplant success rate was 0% in the no vinyl mulching in the soil, but the first year and second year seedlings survived rates were 63% and 83.3%, respectively, in vinyl mulching. Common reed decomposition rates were faster low salinity than high salinity. All nutrient contents were found to fluctuate significantly with time by soil conditions. We also need to study the growth rate of reed transplanting seedlings by soil moisture contents and the comparison of degradation in common reed tissues.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.2
• /
• pp.132-141
• /
• 1994

In order to study the effects of silage additive on the quality and in preventing aerobic deterioration, reed canarygrass silages were made with various levels of formic acid, caproic acid and a mixture of the two acids. Preparation of silages cutted into about 1.5 cm length with the forage cutter and packed in vinyl bags(50 kg of capacity, 0.1 mrn of thickness), and it also divided nine types of experimental treatments. Aerobic deterioration in the silages were investigated for 7 days of aerobic exposure periods, and the plastic vessel of diameter 25 cm, a height 30 cm used as a tool. The results obtained from this experiment are summarized as fellow. 1. Crude protein and NFE contents at the time if opening were increased in the silage with mixture of formic and caproic acids(P<0.01). Crude fiber and ADF contents during the 7 days of aerobic exposure periods were the decreased in the sslages with mixture of two acods treatment(P<0.01). 2. Temperature of the silage treated with fromic acid alone during the 2 days of aerobic exposure period reached$34.4^{\circ}C$, while that of the silage with caproic acid and mixture formic and caproic acids were not rapidly increased resulting by reduced aerobic deteriorarion. 3. The pH of silages treated with formic acid alone during 7 days of aerobic exposure was not effectively changed, while solages treated with caproic acid were effectively stabilized. 4. The ratio of amminia nitrogen to total nitrogen was significantly decreased in silages with formic acid>caproic acid>mixture of both in the order(P<0.01). 5. Microbiological population of the silage were positively changed during the 7 days of aerobic exposure period. Solages with formic acid were deteriorated at ensiling observed, while applicarion of 1.2% caproic acid was partially reduced deteriorarion by precenting of the growth moulds.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.1-8
• /
• 2008

Regenerated composite fibers are prepared from solution(styela clava tunics /poly vinyl alchol) using N-methylmorpholine-N-oxide(NMMO)/water(87/13)(wt/wt) as a solvent by dry-wet spinning. The chemical cellulose (94%, ${\alpha}$-cellulose content) used for this study is extracted from styela clava tunics (SCT, Midduck), which are treated in chemical process and mechanical grinding. The structure and physical properties of regenerated composite fibers were investigated through IR-spetra, DSC, TGA and SEM. The optimal blend ratio of SCT/PVA for spinning solution was 70/30 and the total weight was 4% concentrations in NMMO/water solvent system. The fiber density, moisture contents and the degree of swelling were $1.5(g/cm^3)$ 10.2(%) and 365(%), respectively. The crystallinity index of composite fibers are decreased as the PVA contents increased. Thermal decomposition of composite fibers took place in two stages at around $250^{\circ}C$ and $550^{\circ}C$. The best thermal stability was obtained with 30% PVA contents.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.6
• /
• pp.620-629
• /
• 2019

To examine the possibility of ear mushroom (EM) as a source of natural vitamin D, the UVB (ultraviolet B) was treated according to sample drying status, drying methods before UVB treatment and harvest time. And then, vitamin D₂ and ergosterol contents were investigated. According to the sample drying status, the vitamin D₂ contents of fresh and freeze-dried EM (whole) increased to 4,634.4~4,780.9 ㎍/100 g D.W. (dry weight) under UVB dose 52.5~70.0 kJ/㎡ and above 18,693.1 ㎍/100 g D.W. under above 105 kJ/㎡, respectively. By drying methods before UVB treatment, vitamin D₂ contents of EM powder (below 500 ㎛) that dried in the vinyl house and freeze-dryer increased to 4,886.2~5,132.9 ㎍/100 g D.W. under above 105 kJ/㎡ and 17,103.7 ㎍/100 g D.W. under 70 kJ/㎡, respectively. Ergosterol content decreased with increasing UVB dose in all experiments. According to the harvest time, vitamin D₂ content under UVB dose 210 kJ/㎡ showed marked difference and in order of June, July, August, October and April. As for the results, the optimum harvest time, drying method before UVB treatment, sample size, UVB dose for the EM contained high vitamin D₂ content were June, freeze-drying, whole, and 105 kJ/㎡, respectively.

• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.53-64
• /
• 1999

The mechanical, electrical, and thermal properties of polyamide-modified poly (vinyl chloride) (PVC)-sol was investigated. PVC-sol was plasticized with dioctyl phthalate (DOP). In this work, the effects of the addition of polyamide on the properties of PVC-sol seal-ants were investigated. Two kinds of polyamide resins having different amine value were used. It was found that the properties of the PVC-sol sealants were significantly affected by the contents and types of the added polyamide rosins. The PVC-sol sealants modified with polyamide A (low amino value) showed higher tensile properties than those modified with polyamide B(high amino value) did, and thermal stability of the sealants showed nearly the same trends. The tensile strength of sealants were decreased with increasing the $CaCO_3$ contents. The dielectric constant were not strongly dependent on the polyamide types and contents.

• Advances in environmental research
• /
• v.3 no.2
• /
• pp.151-162
• /
• 2014

Among the combination of 4 different second metals and 3 different noble metals, Ni 10%-Pd 1%/hematite (Ni(10)-Pd(1)/H) showed best tetrachloroethylene (PCE) removal (75.8%) and production of non-toxic products (39.8%) in closed batch reactors under an anaerobic condition. The effect of environmental factors (pH, contents of Ni and Pd in catalyst, and hydrogen gas concentration) on the reductive dechlorination of PCE by Pd-Ni/hematite catalysts was investigated. PCE was degraded less at the condition of Ni(5)/H (13.7%) than at the same condition with Ni(10)/H (20.6%). Removals of PCE were rarely influenced by the experimental condition of different Pd amounts (Pd(1)/H and Pd(3)/H). Acidic to neutral pH conditions were favorable to the degradation of PCE, compared to the alkaline condition (pH 10). Increasing Ni contents from 1 to 10% increased the PCE removal to 89.8% in 6 hr. However, the removal decreased to 74.2% at Ni content of 20%. Meanwhile, increasing Pd contents to 6% showed no difference in PCE removal at Pd content of more than 1%. Increasing H2 concentration increased the removal of PCE until 4% H2 which was maximumly applied in this study. Chlorinated products such as trichloroethylene, 1,1-dichloroethylene, cis-1,2-dichloroethylene, trans-1,2-dichloroethylene, and vinyl chloride were not observed while PCE was transformed to acetylene (24%), ethylene (5%), and ethane (11%) by Ni(10)-Pd(1)/H catalyst in 6hr.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2966-2970
• /
• 2012

Fullerene/polystyrene ($C_{60}$/PS) nano particle was prepared by using emulsion polymerization. Styrene and fullerene were emulsified in aqueous media in the presence of poly(N-vinyl pyridine) as an emulsion stabilizer, and polymerization was initiated by water soluble radical initiator, potassium persulfate. The obtained nano particles have an average diameter in the range of 400-500 nm. The fullerene contents in the nano particle can be controlled up to 15 wt % by varying the feed ratio, which was confirmed by themogravimetric analysis (TGA) and elemental analysis (EA). The structure and morphologies of the $C_{60}$/PS nano particles were examined by various analytical techniques such as dynamic light scattering (DLS), scanning electron microscope (SEM), transmission electron microscope (TEM), electron diffraction (ED) pattern, X-ray powder diffraction (XRD), and UV spectroscopy. Unlike conventional $C_{60}$/PS particles initiated by organic free radical initiators, in which the fullerene is copolymerized forming a covalent bond with styrene monomer, the prepared $C_{60}$/PS nano particles contain pristine fullerene as secondary particles homogeneously distributed in the polystyrene matrix.