• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.385-392
• /
• 2018

Poly vinyl chloride (PVC) was chemically modified, and used for ultrafiltration to analyze the performance. Non-solvent induced phase separation (NIPS) method was used to prepare membranes. The neat PVC membrane was casted and used as a control membrane. Modified membrane was prepared by reacting PVC with ethanolamine (EA) in the casting solution (labeled as CM-PVC). Pure water permeability (PWP) was evaluated by measuring pure water flux. Humic acid was used as model foulant solute to analyze flux and rejection ability of membranes. Flux and rejection data of neat and modified membranes were compared to prove the improvement in the filtration performance. The experimental results showed that for PVC and CM-PVC, PWP was calculated to be ~64 and ${\sim}143L/m^2{\cdot}h$, respectively, and the rejection of humic acid was found to be 98% and 100%, respectively. TGA was carried out to analyze the effect of chemical modification on the thermal stability of polymer. FT-IR analysis was another characterization technique used for the comparative study.

• 한국화재소방학회논문지
• /
• 제16권4호
• /
• pp.77-84
• /
• 2002

본 연구는 플라스틱재료 중 비드발포폴리스티렌폼, 압출발포폴리스티렌폼, 연질폴리우레탄폼, 경질폴리우레탄폼, 경질PVC파이프, 비닐장판, 폴리에틸렌폰(비난연), 폴리에틸렌폼(난연)를 대상으로 연소가스 독성평가를 위하여 NES 713 방법에 따라 발생되는 연소가스를 가스텍(GASTEC) 가스검지관을 이용하여 조사하였다. 연구결과 플라스틱재료의 연소시 발생되는 연소가스에 인간이 30분 동안 노출될 경우 사망에 이르는 독성지수 1 이상을 갖고 있었으며, 각 실험체의 독성지수 결과는 4.3∼179.2로 나타났으며 경질 PVC파이프가 179.2로 가장 높았다.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.93-97
• /
• 2023

A triboelectric nanogenerator (TENG) is a device that converts mechanical energy into electrical energy, and has been considered as a substitute for continuous power supply due to its high performance, simple structure and eco-friendliness. Recently, it is important to develop a TENG using a non-toxic material in order to use it as a power source for wearable, attachable, and body-embeddable electronics. Here, we developed a human friendly TENG using polyvinyl chloride (PVC) gel containing acetyl tributyl citrate (ATBC), a non-toxic plasticizer. PVC gels were fabricated using various ratios of PVC and ATBC, and optimized by investigating dielectric properties, surface potential, output performance, and durability. The PVC gel based TENG generates output signals of 73 V and 4.3 μA, i.e., a 5-fold enhancement in the output power compared to pristine PVC-based TENG. In addition, the PVC gel can be stretched over 500% of strain. This study is expected to be helpful in the future development of non-toxic wearable TENG.

• 전기화학회지
• /
• 제12권4호
• /
• pp.335-341
• /
• 2009

Organic-inorganic hybrid sol-gel matrices were used as hosts for chloro (5, 10, 15, 20-tetraphenylporphyrinato) cobalt (III) (Co[TPP]Cl), a known ionophore for nitrite. The sol-gel precursor was prepared by the reaction of (3-isocyanopropyl) triethoxysilane with 1,4-butanediol. An appropriate amount of the anion-exchanger, tridodecylmethylammonium chloride (TDMAC) and the plasticizer, tributylphosphate (DBP) were used as membrane additives. On mixing with an acidic catalyst, the sol-state precursors slowly gelled, yielding a membrane in which the active components, Co[TPP]Cl and TDMAC, were encapsulated. The performances of the sol-gel membrane-based electrodes were compared to those of Co[TPP]Cl-based poly(vinyl chloride) (PVC) membrane electrodes. Membranes with a molar ratio of Co[TPP]Cl: TDMAC (1 : 0.1) showed reasonable response slopes toward nitrite. The response slopes were typically 53 mV/decade between $10^{-5.4}$ and $10^{-1.0}\;M$. Selectivities toward nitrite over hydrophilic and small anions such as chloride were somewhat inferior to those observed with PVC-based membranes, but selectivities over lipophilic anions were quite similar. Reduced asymmetry potentials due to protein adsorption were found to occur with the sol-gel matrix relative to PVC-based films when the sensors were employed as a detector in flow-through configuration.

• 한국농촌건축학회논문집
• /
• 제16권4호
• /
• pp.75-81
• /
• 2014

In this study, we have intended to provide the related construction manuals with technical materials and to reduce the defects in the on-site construction, with reviewing the adhesive properties of joint parts according to change of temperature and speed of hot-air sealer for the products that have been made of polyvinyl chloride(PVC) materials in the single waterproof sheet. The result from the experiment is shown as following. 1) Bond strength was shown as high as the welding speed became slower. For the hot-air welding velocity with 3~6m/min, a stable bond strength has been shown in the range of the hot-air welding temperature with $175{\sim}210^{\circ}C$, while it has been shown in the range of the hot-air welding temperature with $210^{\circ}C$, when the hot-air welding velocity is between 9~12m/min. 2) If the hot-air welding temperature is lower, the adhesive strength has been shown as higher in the section where the hot-air welding velocity is low, while the adhesive strength has been also shown as higher in the section where the velocity is fast as the hot-air welding temperature becomes higher. The highest bond strength has been shown in the velocity with 3m/min for the hot-air welding temperature with $140{\pm}10^{\circ}C$, which is rather low. At $175{\pm}10^{\circ}C$, a high bond strength has been shown in the velocity with 3~6m/min, while the high bond strength has been shown in the velocity with 6~9m/min at $210{\pm}10^{\circ}C$.

• 한국재료학회지
• /
• 제11권2호
• /
• pp.126-131
• /
• 2001

4 차 암모늄염을 형성할 수 있는 공중합체들 poly[(vinylbenzyl chloride)-co-(n-butyl acrylate)-co-(2-hydroxyethyl methacrylate)]와 poly[(4-vinylpyridine)-co-(n-butyl acrylate)-co-(2-hydroxyethyl methacrylate)]를 고분자막 습도센서의 감습재료로 사용하기 위하여 합성하였다. 습도센서는 30%RH, 60%RH 그리고 90%RH에서 평균 저항 값은 각각 8.6 M $\Omega$, 310 k$\Omega$ 그리고 12 k$\Omega$을 보여 주었다. 또한 히스테리시스는 $\pm$3%RH 안에서 나타났으며, 온도의존성 계수는 -0.37~-0.407RH/$^{\circ}C$이었다. 감습막의 조성에서 공중합체 중 n-BA와 HEMA의 도입은 저항을 증가시키는 요인이 되나 기판과의 접착성은 크게 향상되었다. 33%RH에서 85%RH로 또는 역으로 변화할 때의 응답속도는 54초이며 수중에 2시간 침적 후 저항의 변화는 +0.2%RH 이내에서 존재하였다.

• 대한화학회지
• /
• 제24권1호
• /
• pp.64-72
• /
• 1980

새로운 acrylimide로서 N-acrylylpyrrolidone을 합성하였다. N-Acrylylpyrrolidone은 N-methacrylyl-lactam과는 다르게 homopolymerization을 열적으로도 함을 관찰하였다. Styrene과 N-acrylylpyrrolidone의 공중합시 각 monomer의 reactivity ratio를 구하였다. 그 결과 생성되는 copolymer는 pyrrolidone의 음이온 중합에 적절한 acyl-lactam function을 가지고 있음을 알았다.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.211-215
• /
• 2017

Thermally expandable microspheres were used as post-treatment initiators of potassium persulfate, sodium bisulfite, and sodium sulfide in order to improve the foaming ability and whiteness when foaming a mixture of thermally expandable microsphers and poly(vinyl chloride). Potassium persulfate showed no significant influence on the foaming behavior, foam expansion, whiteness, and yellowing, whereas in the case of using sodium bisulfite. In particular, sodium bisulfite demonstrated the best efficiency with 2 wt% treatment. The thermally expandable microspheres prepared herein can provide excellent foamability and whiteness, and are expected to be applicable in various fields such as general coating and wallpaper.

• Toxicological Research
• /
• 제6권1호
• /
• pp.61-61
• /
• 1990

Human exposure to environmental carcinogens can be detected by a number of methods including immunoassay, $^{32}P$-postlabeling assay, and fluorescence technique. These assays have been applied to measure biological markers of carcinogen-adducts formed with macromolecules such as DNA, RNA and protein. In an attempt to investigate causal relation ships between carcinogen exposure and tumor formation, specific carcinogen-adducts have been quantitated from human tissues and body fluids of cancer patients, occupational workers heavily exposed to certain carcinogens, smokers and controls. Carcinogens studied for biological human monitoring include benzo(a)pyrene, aflatoxin B1, UV light, ethylene oxide, 8-methoxypsoralen, 4-aminobiphenyl, vinyl chloride, N-nitrosamine, cisplatin and other chemotherapeutic agents. Relevance of human monitoring for cancer research, progress in this field, methods to detect carcinogen-adducts are reviewed here. It is hoped that these approaches will be used for the risk assessment of carcinogen exposure, cancer etiology study and cancer prevention in humans.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 1993년도 EARTH 발표논문초록
• /
• pp.13.2-13
• /
• 1993