• Proceedings of the Acoustical Society of Korea Conference
• /
• 한국음향학회 2002년도 하계학술발표대회 논문집 제21권 1호
• /
• pp.369-372
• /
• 2002

전극분할 된 횡진동 모드 압전 진동자에 NIC 회로를 적용한 특성제어 방법을 두께 진동 모드 압전 진동자에 적용하여 그 가능성을 확인해 보았다. 동일한 특성을 가진 두 개의 두께 진동 모드 압전 진동자를 분극방향이 서로 마주보게 제작한 다음, NIC 회로를 적용하여 그 실험결과를 PSpice 모델을 이용한 시뮬레이션과 비교하였다. 그 결과 NIC 회로의 저항 $R-s$,의 변화에 따라 두께 진동 모드 압전 진동자의 품질계수는 제어되었으며, NIC 회로를 적용하지 않은 경우보다 품질계수가 약 18.9배 정도 향상되었다.

• The Journal of the Acoustical Society of Korea
• /
• 제26권1E호
• /
• pp.27-32
• /
• 2007

Hydraulic actuator and electro-magnetic liner actuator have been used as typical active vibration control methods. However these methods have many kinds of disadvantages such as causing space limit, difficult maintenance, complicate structures, etc. The purpose of this paper was to study on the possibility of active vibration control using piezoelectric transducer. Piezoelectric transducer generated a vibration and GIC (General Impedance Converter) amplifier was adopted to give adjustable vibration signal to transducer and high amplitude of vibration. Resonance frequency of piezoelectric transducer was controlled by GIC amplifier and higher amplitude of vibration was achieved. Finally active vibration control using piezoelectric transducer was performed.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권4호
• /
• pp.159-164
• /
• 2003

In this paper, a three-dimensional finite element method and construction of equivalent-circuit for a linear ultrasonic motor are presented. The validity of three-dimensional finite element routine in this paper is experimentally confirmed by analyzing impedance of a piezoelectric transducer. Using this confirmed finite element routine, impedance and vibration mode of a linear ultrasonic motor are calculated. Elliptical motion of contact point between vibrator and rail of the linear ultrasonic motor is shown for determination of contact points. By using the finite element method and analytic equations, characteristics of the linear ultrasonic motor, such as thrust force, speed, losses, powers and efficiency, are calculated. The results are confirmed by experiment. Finally, equivalent circuit parameters of the linear ultrasonic motor are obtained using the three-dimensional finite element method and analytic equations.

• Journal of the Korean Society of Safety
• /
• 제4권1호
• /
• pp.91-98
• /
• 1989

Today, the conception of building architecture is changing the conception that it is a kind of product and the operator of construction try to produce excellent building through developing efficiency and materials of building component. This study improves the problematic point of the extenor tile setting, through making on experiment on the method of it and purposes doing to do the exterior tile setting of good quality as it selects out of the most conformable the method. The experimental materials choose the tile of 60$\times$108mm size which are using frequently in the exterior tile setting and mortar is made from sand of Han river and potland cement, which apply the volume mixing of the ratio 1：3. The water cement ratio (W/C)is made up 62％ The methods of tile setting utilise the method of the tile setting and laying the method of the tile improved setting and laying, the method ol the pressing adhesion, the method of the improved pressing adhesion and the method of setting adherent (the method of VIBRATOR).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.177-180
• /
• 2000

In this paper, we studied efficiency improvement of linear ultrasonic motor using projection. The principle of ultrasonic motor is to use an elliptic motion generated at the side of the vibrator, and the elliptic motion of the ultrasonic motor was obtained by complex oscillation of L$_1$-B$_4$ mode. As the experimental results, the efficiency of linear ultrasonic motor without projection was 1.52[%] when applied voltage was 56[V] in resonance frequency 58.4[kHz]. The efficiency of linear ultrasonic motor using projection was 3.36[%] when applied voltage was 56[V] in resonance frequency 58.4[kHz]. The efficiency was improved by projection.

• Journal of the Korean Society of Safety
• /
• 제2권3호
• /
• pp.13-20
• /
• 1987

Today, the conception of building architecture is changing the conception that it is a kind of product and the operator of construction try to produce excellent building through developing efficiency and materials of building component This study improves the problematic point of the exterior tile setting, through making an experiment on the method of it and purposes doing to do the exterior tile setting of good quality as it selects out of the most conformable the method. The experimental materials choose the tile of 60$\times$108 mm size which are using frequently in the exterior tile setting and ready mixed compound for bonding mortar. The methods of tile Betting utilize the method of the tile setting and laying, the method of the tile improved setting and laying, the method of the pressing adhesion, the method of the improved pressing adhesion and the method of setting adherent (the method of VIBRATOR).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.323-326
• /
• 1999

In this paper, a windmill type ultrasonic motor operated by single-Phase AC electric field was fabricated, and then torque characteristics were investigated. A metal-ceramic composite component was used as the stator\`s vibrator to generate ultrasonic vibrations. The windmill type ultrasonic motors has only three components; a stator element with two wind-mill shape slotted metal endcaps, a rotor and a bearing. In this parer we measured torque, when stator\`s slot was changed Iron 4, 6, 8. Brass metal was pressed with umbrella-type using metal molt then slot of 3 kind was manufactured. The maximum revolution speed was 388(rpm) in the case of a small ultrasonic motor of 11.35 mm diameter, 8 slot and 1.01 mm thickness. The maximum torque of 0.17 mNm was obtained at a speed of 131 rpm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제20권11호
• /
• pp.953-958
• /
• 2007

In this paper, multilayer actuator structured-ultrasonic nozzle and resonant inverter driving circuit were manufactured, respectively. Its electrical properties were investigated. Multilayer actuator structured ultrasonic nozzle was fabricated using PMN-PNN-PZT ceramics showing excellent piezoelectric characteristics. In order to drive ultrasonic nozzle, resonant PWM inverter was used. The purpose of this study is to find the optimal driving condition of ultrasonic nozzle. Accordingly, electrical and temperature characteristic of multilayer ultrasonic driving system were investigated by experiments as a function of the series resonance inductance. The driving current of ultrasonic nozzle showed the maximum current of 27 mA. Also, the surface temperature of ceramic vibrator showed $44^{\circ}C$ at driving time for 20 min. The ultrasonic nozzle was stably operated in the case of driving for more than 20 min.

• Journal of the Korean Society for Precision Engineering
• /
• 제25권6호
• /
• pp.92-98
• /
• 2008

The target of this paper is to study on the usefulness of the SSHI technique as a wireless electrical power supply when it is driven by mechanical vibrations of low frequency. A THUNDER series a piezoelectric material (TH7-R), which has been developed by a NASA engineer is selected for this study. A mechanical motion vibrator supplies piezoelectric material with mechanical energy. An optical fiber sensor and a pulse generating circuit are used to accomplish the parallel-SSHI technique. As a result of this study, energy harvesting using SSHI technique results in a significant increase of the electrical power flow.

• Journal of the Korean Society for Precision Engineering
• /
• 제25권5호
• /
• pp.155-163
• /
• 2008

This study investigated biomechanical response through the 3-dimensional virtual skeletal model developed and validated. Ten male subjects in standing posture were exposed to whole body vibrations and measured acceleration on anatomical of interest (head, $7^{th}$ cervical, $10^{th}$ thoracic, $4^{th}$ lumbar, knee joint and bottom of the vibrator). Three dimensional virtual skeletal model and vibration machine were created by using BRG LifeMOD and MSC.ADAMS. The results of forward dynamic analysis were compared with results of experiment. The results showed that the accuracy of developed model was $73.2{\pm}19.2%$ for all conditions.