• 한국정보통신학회논문지
• /
• 제15권11호
• /
• pp.2457-2464
• /
• 2011

본 논문에서는 압전 소자를 이용한 진동에너지 하베스팅 회로를 설계하였다. 압전소자의 전력-전압 특성을 이용하여 최대 전력을 부하로 전달하기 위한 MPPT(Maximum Power Point Tracking) 제어 기능을 구현하였다. MPPT 제어 회로는 압전소자의 출력 단에 연결된 전파 정류회로의 개방회로 전압을 주기적으로 샘플링하여 최대 가용전력이 생성되는 지점을 추적하고 이를 부하로 전달하는 역할을 한다. 제안된 진동에너지 하베스팅 회로는 $0.18{\mu}m$ CMOS 공정으로 설계하였다. 모의실험 결과 설계된 회로의 최대 전력 효율은 91%이고, pad를 제외한 칩 면적은 $700{\mu}m{\times}730{\mu}m$이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.392-395
• /
• 2011

본 논문에서는 압전 소자를 이용한 진동에너지 하베스팅 회로를 설계하였다. 압전소자의 전력-전압 특성을 이용해 최대 전력을 부하로 전달하기 위한 MPPT(maximum power point tracking control) 제어 기능을 추가하였다. MPPT 회로는 전파 정류회로의 개방회로 전압을 주기적으로 샘플링하여 최대 가용전력이 생성되는 지점을 추적하고 이를 부하로 전달한다. 진동에너지 하베스팅 회로는 $0.18{\mu}m$ CMOS 공정으로 설계하였다. 최대 전력 효율은 91%이고, pad를 제외한 칩 면적은 $1,100{\mu}m{\times}730{\mu}m$이다.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권2호
• /
• pp.241-248
• /
• 2021

High cycle fatigue life for the cables with two different types of clamps is estimated comparatively through acceleration testing. The high cycle fatigue fracture of overhead lines is caused mainly by the aeolian vibration which is induced by vortex shedding. It is necessary to manage the integrity of cables continuedly considering that the aeolian vibration is unavoidable since it occurs in steady and relatively low wind velocity. Two types of clamps which are largely used for overhead lines of the distribution grids are selected and failure data are obtained by step stress testing with a electrodynamic shaker with them. The inverse power law is assumed to describe the stress-life relationship and the fatigue limit at any specified life is supposed to follow Weibull distribution. The life of the cable is defined as the number of cycles to the time that one of strands is completely broken. Finally, the fatigue limits of the cables with two clamp types are estimated at the reference life of 500 Mcycles and compared each other based on a bending vibration amplitude.

• 전력전자학회논문지
• /
• 제18권3호
• /
• pp.211-216
• /
• 2013

A wind generator system model includes wind model, rotor dynamics, synchronous generator, power converter, distribution line and infinite bus. This paper investigates the low-Voltage Ride-Through capability of PMSG wind turbine in a variable speed. The drive train of a wind turbine on 2-mass modeling can observe the shaft torsional vibration when the low-voltage occur. To reduce the torsional vibration when the low-voltage occur, this paper designs suppression control algorithm of the torsional vibration and implements simulation. The simulation based on MATLAB/SIMULINK has validated at the transient state of the PMSG and an experiment using 3kW simulator has validated the LVRT control.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.544-549
• /
• 2001

The effect of power supply voltage on the performance limits in a laboratory Magneto-rheological fluid based device was identified by experiments. It suggests that the frequency range of motion for control be limited by the voltage attenuation due to the coil inductance and the maximum power supply voltage set for practical use of MRF devices. In this work, the magnetic and electrical characteristics of MRF device are investigated and a design procedure is formulated to achieve the desired performance for a given power supply.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.405-410
• /
• 2002

In this paper, numerical method of evaluating the influence of Dual Mass Flywheel(DMFW) to the torsional vibration of the automotive power train system is developed. And we applied the procedure to the currently being developed HMC's DMFW attached to an FF car to find out the best performance characteristics during the Tip-in/Tip-out operating condition. In doing this we compared the numerical results with the experimental results and Performed Parametric studies. We find out that the torsional vibrational characteristics of power train system can be significantly improved when we optimally choose DMFW, and the developed numerical procedure could be used as valuable tools in developing new DMFW.

• 소음진동
• /
• 제10권1호
• /
• pp.129-137
• /
• 2000

This paper presents the vibration characteristics of reactor internals of Ulchin-1 nuclear power plant, which are identified by using the conventional and the phase separated spectral analysis of the pressure vessel acceleration and ex-core neutron signals. These identified vibration characteristics show excellent agreement with those of Tricastin-1 nuclear power plant that is the prototype of Ulchin-1. And the trend of ex-core neutron signals has been observed during one reactor cycle. These results can be used as basic data for fault diagnosis of reactor internals.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.309-316
• /
• 2024

The U.S. Nuclear Regulatory Commission (NRC) Regulatory Guide (RG) 1.20 provides guidance on the comprehensive vibration assessment program (CVAP) to be performed on reactor internals during preoperational and startup tests. The purpose of the program is to identify loads that could cause vibration in the reactor internals and to ensure that these vibrations do not affect their structural integrity. The structural vibrational analysis program involves creating finite element analysis models of the reactor internals and calculating their structural responses when subjected to vibration loads. The appropriateness of the structural analysis methodology must be demonstrated through benchmarks or any other reasonable means. Although existing structural analysis methodologies have been proven to be appropriate and are widely used, this paper presents the development of an improved new structural analysis methodology for APR1400 reactor internals using scaled model tests.

• 전기의세계
• /
• 제13권3호
• /
• pp.28-37
• /
• 1964

It is the intention of this thesis to discriminate and investigate the cause of the shaft vibration of the vertical type hydroelectric power generator with respect to electrical, mechanical and hydraulic aspects, and to analyze the vibration which will occure by the each cause investigated above. In order to test the shaft vibration of No.1 generator in Hwachon, Korea new measurement method and measuring equipments were designed. In practice the shaft vibration of the generator was measured by above equipments and analyzed by the discriminative method. Detailed explanation for the designed measurement method and instruments is presented, and the results which I had tested three times for the generator No.1 in Hwachon power plant are added. As a appendix the mechanism and causes of the thrust bearing's wear and remarks for the runner are written.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2529-2534
• /
• 2000

Torsional vibration analysis in a large two -stroke low speed diesel engine and generator system for stationary power plants is performed to verify that the vibration characteristics of shafting system meet design requirements. Our own developed S/W is employed for the analysis, whose results are evaluated comparing with measurements. Vibration analysis results of the system are presented according to the change of loading(unload, 100%load, 110% load) and operating(mis-firing, uneven firing) conditions of the stationary power plants.