• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.54-55
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.135-136
• /
• 2013

• 한국산업융합학회 논문집
• /
• 제3권2호
• /
• pp.115-121
• /
• 2000

This paper presents reducing method of profile error on a mechanical tuning for multi-spindle control of NC machine tools. To reduce the profile error in the feed drive system, it is useful to adopt same transfer function of multi spindle machine tools. By selecting the correction vector of servo rigidity and natural vibration on JK map, multi spindle control can be tuned by mechanical parameters with small profile error.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.37-43
• /
• 2007

Recent technological developments in machine tools have been focused on high speed, low vibration machining and high precision machining. And the concern with multi-functional machining has been increased for the last several years. Multi-tasking machines are widely used in machine tool industries. Laser multi-tasking machine has been developed for high precision and fewer vibration machining. The purpose of this study is to evaluate the effects of structural reinforcement on Laser multi-tasking machine which is comprehensively combined turning center and laser machine. Up to date, for the structural stability evaluation of a multi-tasking machine, the analysis model has been considered only the weight of the upper parts. The positions of upper parts on multi-tasking machine have not been considered in the model. So, the results of the present FE model have revealed some difference with measurement data in case of multi-tasking machine. Design of the machine and structural analysis is carried out by FEM simulation using the commercial software CATIA V5. In the result of the structural analysis, effectiveness of reinforcement of the bed was confirmed.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.121-126
• /
• 2013

Precision machine tools for high dignity cutting are needed for efforts to improve machining accuracy. However, there are many factors to improve machining accuracy. This study investigated how machining accuracy changes when variation and unbalance amount in rotational speed domain is decreased. Machining accuracy of initial machine tools depends on manufacturing and assembly of parts such as bearing. And then, vibration and noise vary with volume of unbalance amount when it is rotation, so it effects unbalance amount. Also vibration and noise increased by unbalance shorten spindle's life and it especially makes worse boring accuracy. Therefore, this study studied the change of roundness and cylindricity of workpiece when it decreases variation and unbalance in rotational speed domain.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2022

In this study, vibration analysis of washing machine dehydration was carried out using laser sensors. The suspension of the washing machine was attached to a jig developed for this study. In addition, 10 laser sensors were attached to the jig. The channels of each laser sensor are composed of five channels: front, rear, left, right, and upper. Data acquisition equipment was used to obtain sensor data. The measured data were processed using signal processing, and interpolation of the data was performed using MATLAB with robust interpolation. Vibration analysis according to unbalanced mass and sensor attachment points was carried out.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.219-224
• /
• 2004

There have been many researches on machine tool vibration and chatter to obtain assessment procedure and more productivity. In this paper chatter limit is predicted on a universal machining center which used a parallel mechanism. The prediction method uses the combination of structural dynamic characteristics and cutting dynamics. So the dynamic characieristics were obtained by vibration experiments. We showed the unstable cutting conditions, and from them we could plot the unstable borderlines.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권2호
• /
• pp.27-30
• /
• 2019

Factory monitoring systems are gaining importance in wide areas of industry. Especially, there have been many efforts in implementation of vibration measurement and analysis for monitoring the status of rotating machines. In this paper, a digital signal processor (DSP) based monitoring system dedicated to the vibration monitoring and analysis on rotating machines is discussed. Vibration signals are acquired and processed for the continuous monitoring of the machine status. Time domain signals and fast Fourier transform (FFT) are used for vibration analysis. All of the signal processing procedures are done in the DSP to reduce the production and maintenance cost. The developed system could also provide remote and mobile monitoring capabilities to operator via internet connection. This paper describes the overview of the functional blocks of the implemented system. Test results based on signals from small-size single phase motors are discussed for monitoring and defect diagnosis of the machine status.

• Journal of Electrical Engineering and Technology
• /
• 제2권4호
• /
• pp.461-467
• /
• 2007

The paper describes a way to diagnose machine condition based on the expert system. In this paper, an expert system-decision tree is built and experimented to diagnose and to detect machine defects. The main objective of this study is to provide a simple way to monitor machine status by synthesizing the knowledge and experiences on the diagnostic case histories of the rotating machinery. A traditional decision tree has been constructed using vibration-based inputs. Some case studies are provided to illustrate the application and advantages of the decision tree system for machine fault diagnosis.

• Smart Structures and Systems
• /
• 제13권6호
• /
• pp.959-974
• /
• 2014

Hand-Arm Vibration Syndrome (HAVS) is a group of diseases caused by exposure of the hands to vibration while operating the hand held power tools such as road breaker, drilling machine, demolition hammer in construction works. In this paper, area-changed capacitive micro-accelerometer is designed to measure the vibration exposure on worker's hand when operating a drilling machine on various blocks such as clay block, paver block and solid cement block. The design process includes mathematical modelling of micro-accelerometer and simulations are done using INTELLISUITE 8.6. Experimental results are taken for various blocks surfaces using conventional and micro-accelerometer. Comparisons show that usage of area-changed micro-accelerometer for Hand-arm vibration monitoring provides better sensitivity, which in turn reduces the risk of HAVS in workers.