• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.189-198
• /
• 1994

The achievable machining accuracy depends upon the level of the micro-engineering, and the today's accuracy targets are dimensional tolerances in the order of 10nm and surface roughness in the order of 1nm. Such requirements cannot be satisfied by the conventional machining processes. Single point diamond turning is the one of new techniques which can produce the parts with such accuracy limits. The aims of this thesis are to get a better understanding of the complex cutting process with a diamond tool and, consequently, to develope a predicting model of a turned surface profile. In order to predict the turned surface profile, a numerical model has been developed. By means of this model, the influence of the operational settings-the material properties of the workpiece, the geometry of the cutting tool and the dynamic behaviour of the lathe-and their influences via the cutting forces upon the surface roughness have been estimated.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.434-445
• /
• 2004

Motion Estimation is an essential module in video encoders based on international standards such as H.263 and MPEG. Many fast motion estimation algorithms have been proposed in order to reduce the computational complexity of a well-known full search algorithms(FS). However, these fast algorithms can not work efficiently in DSP processors recently developed for video processing. To solve for this. we propose an efficient motion estimation scheme optimized in the DSP processor like Philips TM1300. A motion vector predictor is pre-estimated and a small search range is chosen in the proposed scheme using strong motion vector correlation between a current macro block (MB) and its neighboring MB's to reduce computation time. An MPEG-4 SP@L3(Simple Profile at Level 3) encoding system is implemented in Philips TM1300 to verify the effectiveness of the proposed method. In that processor, we can achieve better performance using our method than other conventional ones while keeping visual quality as good as that of the FS.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.23-29
• /
• 2009

The ovate pontic was first described by Dewey and Zugsmith in 1933, but used clinically as a clinical alternative for esthetics in the late 1990s. The ovate pontic has been suggested as a more accurate duplication of emergence profile for natural teeth to provide an esthetic, cleanable prosthesis. If the resin temporary prosthesis with the ovate pontic is used during the healing period after the tooth extraction, it is possible to preserve the interdental papilla and eliminate or minimize the black triangle between the teeth. Ultimately it can become a esthetic final restoration without saliva leakage and phonetic discomfort. In this case we tried to treat the maxillary anterior area by the use of the ovate pontic and minimize the loss of the interdental papilla via duplicate the emergence profile of the natural tooth.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.674-686
• /
• 2019

In this paper, we will discuss the absolute angular error control mode for the Gun/Turret driving system. The Gun/Turret driving controller receives absolute angular error calculated from the fire control system (FCS). Thus, the Gun/Turret driving controller is subjected to step command to cause residual vibration and system unstable. In order to reduce residual vibration and to ensure the system stability, we propose an error motion profile method with two types of trapezoidal and S-Curve. The validity of the proposed error motion profile method is confirmed via simulation by observing that the resulting position error, driving power, and power density satisfied the control performance.

• Journal of Power System Engineering
• /
• v.14 no.3
• /
• pp.64-70
• /
• 2010

In this study, designing of precise linear transferring device which can be applied to industrial machine and robot industry has been introduced. The direction of power flow and output feature are similar to current Rack-Pinion type. However, unlimited length extensity via rack modulizing, and securing high velocity transportation have been realized by applying Pin-Pinion Gear type at the operation part. The analysis has been calculated to obtain the Pin-Pinion Gear's optimized tooth profile. As a result of research, it is impossible to control precisely even overlap at the teeth of involute and sprocket. Because they have peculiar gearing structure. Therefore, modified cycloid tooth has been proposed to perform high velocity, precise control without backlash.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.15-20
• /
• 2019

A large amount of site investigation data is essential to obtain reliable design value. However, site investigations are generally insufficient due to economic problems. It is important to estimate the ground profile information in unboring region for accurate earthwork-volume prediction, and such ground profile information can be estimated by using the geo-statistical approach. Furthermore, the ground profile information in unboring region can be estimated by training a model via machine learning technique such as artificial neural network. In this paper, artificial neural network-based model estimated the ground profile information in unboring region, and this results were compared with that of ordinary kriging technique, which is referred to the geo-statistical approach. Accordingly, a total of 84 ground profile information in an actual bridge environment was split into 75 training and 9 test databases. The observed ground profile information of the test database was compared with those of the ordinary kriging technique and artificial neural network.

• Journal of Broadcast Engineering
• /
• v.15 no.3
• /
• pp.434-453
• /
• 2010

In this paper, we propose 3DTE(3-Dimensional Transform Environment) that is based on 3DT(Dimensional Transform) that performs 2-dimensional integer DCT(Discrete Cosine Transform) based on $4{\times}4$ block and 1-dimensional integer DCT based on $4{\times}1$ block after collecting same frequency coefficients in neighboring $4{\times}4$ block and supports it's additional coding tools for high performance. The transform of 3DT can keep prediction error by using $4{\times}4$ block and reduce spatial redundancy additionally. The proposed 3DTE can provide coding tools to improve the coding efficiency with using 3DT. The performance of 3DTE compared to JM11.0 is average 3.58% and 5.40% bit savings for all test sequences and HD sequences, respectively, with keeping subjective video quality in High profile.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.236-240
• /
• 2003

Fabrication of a graded index profile was possible via photochemical reaction of cinnamoyl groups with 350 nm wavelength UV light to form crosslinked structures. Such structural change may induce the change in the refractive index. In order to generate graded index profile in the PMMA polymer optical fiber (POF) with cinnamoyl groups by photochemistry, a methyl methacrylate monomer containing a cinnamoyl functional group in the side chain were prepared. This monomer was then copolymerized with methyl methacrylate with various compositions not only to utilize advantages of poly(methyl methacrylate) but also to overcome the drawbacks of the cinnamate homopolymer. Changes of refractive indices were investigated with various contents of cinnamoyl group and varying irradiation time. Large change in the refractive index (${\Delta}{\approx}0.01$) and its proper profile shape ($g{\approx}2.2$) can be obtained by changing irradiation time.

• Computers and Concrete
• /
• v.30 no.2
• /
• pp.143-150
• /
• 2022

In this paper, the non-linear mathematical problem is solved via numerical scheme by utilizing shooting method. Brownian diffusion and thermophoresis along mass and heat transfer are accounted for. Non-linear expression is reduced via non-dimensional variables. The simplified ordinary differential equations are tackled by shooting technique. Behavior of distinct influential parameters is investigated graphically and analyzed for temperature and concentration profile. Our finding indicates that temperature profile is enhanced for the thermophoresis, Brownian motion coefficient, Prandtl number, Eckert number and temperature slip parameter. Comparison of numerical technique with the extant literature is made and an acceptable agreement is attained. Graphs are plotted to examine the influence of these parameters.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.2
• /
• pp.29-36
• /
• 2008

In this paper, mechanical reliability issues of copper through-wafer interconnections are investigated numerically and experimentally. A hermetic wafer level packaging for MEMS devices is developed. Au-Sn eutectic bonding technology is used to achieve hermetic sealing, and the vertical through-hole via filled with electroplated copper for the electrical connection is also used. The MEMS package has the size of $1mm{\times}1mm{\times}700{\mu}m$. The robustness of the package is confirmed by several reliability tests. Several factors which could induce via hole cracking failure are investigated such as thermal expansion mismatch, via etch profile, and copper diffusion phenomenon. Alternative electroplating process is suggested for preventing Cu diffusion and increasing the adhesion performance of the electroplating process. After implementing several improvements, reliability tests were performed, and via hole cracking as well as significant changes in the shear strength were not observed. Helium leak testing indicated that the leak rate of the package meets the requirements of MIL-STD-883F specification.