• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.847-856
• /
• 2006

In this paper, we suggested a mobile collaboration framework for supporting mobile services among mobile devices, and designed and implemented on this environment. The suggested framework has three elements; groups of sensors and mobile devices(Fixed and Moving-typed PDAs) and a home server. We designed interfaces for interactions with each other in collaboration environment with three elements described above. The information collected by sensors can be share and exchanged by mobile devices or a home server in accordance with Push and Pull methods. This framework is based on the distributed object group framework(DOGF) we implemented before. Therefore the DOGF provides functions of object group management, storing information and security services to our mobile collaboration framework via application interfaces defined. The information collected by sensors is arranged according to user's security 'demands. And user profile information is used for checking authority of each service object. Each component for executing functions of mobile devices and a home server is implemented by TMO scheme. And we used the TMOSM for interactions between distributed components. Finally, we showed via GUI the executablity of a given healthcare application scenario on our mobile collaboration framework.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.1
• /
• pp.3-10
• /
• 2014

Objectives: Although nerve growth factor (NGF) could promote the functional regeneration of an injured peripheral nerve, it is very difficult for NGF to sustain the therapeutic dose in the defect due to its short half-life. In this study, we loaded the NGF-bound heparin-conjugated fibrin (HCF) gel in the NGF-delivering implants and analyzed the time-dependent release of NGF and its bioactivity to evaluate the clinical effectiveness. Materials and Methods: NGF solution was made of 1.0 mg of NGF and 1.0 mL of phosphate buffered saline (PBS). Experimental group A consisted of three implants, in which $0.25{\mu}L$ of NGF solution, $0.75{\mu}L$ of HCF, $1.0{\mu}L$ of fibrinogen and $2.0{\mu}L$ of thrombin was injected via apex hole with micropipette and gelated, were put into the centrifuge tube. Three implants of experimental group B were prepared with the mixture of $0.5{\mu}L$ of NGF solution, $0.5{\mu}L$ HCF, $1.0{\mu}L$ of fibrinogen and $2.0{\mu}L$ of thrombin. These six centrifuge tubes were filled with 1.0 mL of PBS and stirred in the water-filled beaker at 50 rpm. At 1, 3, 5, 7, 10, and 14 days, 1.0 mL of solution in each tubes was collected and preserved at $-20^{\circ}C$ with adding same amount of fresh PBS. Enzyme-linked immunosorbent assay (ELISA) was done to determine in vitro release profile of NGF and its bioactivity was evaluated with neural differentiation of pheochromocytoma (PC12) cells. Results: The average concentration of released NGF in the group A and B increased for the first 5 days and then gradually decreased. Almost all of NGF was released during 10 days. Released NGF from two groups could promote neural differentiation and neurite outgrowth of PC12 cells and these bioactivity was maintained over 14 days. Conclusion: Controlled release system using NGF-HCF gel via NGF-delivering implant could be an another vehicle of delivering NGF to promote the nerve regeneration of dental implant related nerve damage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.585-593
• /
• 2010

Geographic routing has been considered as an efficient, simple, and scalable routing protocol for wireless sensor networks since it exploits pure local location information instead of global topology information to route data packets. Geographic routing requires the sources nodes to be aware of the location of sinks. Most existing geographic routing protocols merely assume that source nodes are aware of the locations of sinks. How can source nodes get the locations of sinks was not addressed in detail. In this paper, we propose a sink location service via circle path for geographic routing in wireless sensor networks. In this scheme, a sink sends a Sink Location Announcement (SLA) message along a circle path, and a source node sends a Sink Location Query (SLQ) message along a straight path that certainly passes through the circle path. By this way we can guarantee the SLQ path and SLA path have at least one crossing point. The node located on the crossing point of the two paths informs the source node the sink location. This procedure can correctly work in any irregular profile sensor networks such as network that has holes or irregular shape by some rules. Simulation results show that our protocol is superior to other protocols in terms of energy consumption and control overhead.

• Journal of Microbiology
• /
• v.44 no.6
• /
• pp.641-648
• /
• 2006

We previously reported that Skp1, a component of the Skp1-Cullin-F-box protein (SCF) complex essential for the timely degradation of cell cycle proteins by ubiquitination, physically interacts with Bfa1, which is a key negative regulator of the mitotic exit network (MEN) in response to diverse checkpoint-activating stresses in budding yeast. In this study, we initially investigated whether the interaction of Skp1 and Bfa1 is involved in the regulation of the Bfa1 protein level during the cell cycle, especially by mediating its degradation. However, the profile of the Bfa1 protein did not change during the cell cycle in skp1-11, which is a SKP1 mutant allele in which the function of Skp1 as a part of SCF is completely impaired, thus indicating that Skp1 does not affect the degradation of Bfa1. On the other hand, we found that the skp1-12 mutant allele, previously reported to block G2-M transition, showed defects in mitotic exit and cytokinesis. The skp1-12 mutant allele also revealed a specific genetic interaction with ${\Delta}bfa1$. Bfa1 interacted with Skp1 via its 184 C-terminal residues (Bfa1-D8) that are responsible for its function in mitotic exit. In addition, the interaction between Bfa1 and the Skp1-12 mutant protein was stronger than that of Bfa1 and the wild type Skp1. We suggest a novel function of Skp1 in mitotic exit and cytokinesis, independent of its function as a part of the SCF complex. The interaction of Skp1 and Bfa1 may contribute to the function of Skp1 in the mitotic exit.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1151-1165
• /
• 1996

The purpose of this study was to identify the pratical applicability of person-situation benefit segmentations of the female apparel market in Seoul by a prior segmentation method. The specific objectives of this study were 1) to identify the useful demographic variables for person-situation benefit segmentations of the female apparel market, 2) to assess that person- situation benefit segmentations of 1.he female apparel market are accessit)le by developing a profile of each segment based on the interactions of situation and personal characteristics on perceived risk, importance of store attributes and store-type choice, and on brand type prefered by each segment. 3) to assess the validity of person-situation benefit segmentations of the female apparel market in terms of easy accessibility. The data were collected via a questionnaire from 601 housewives of ages 20's to 50's living in Seoul, Korea. The data were analyzed by factor analysis, repeated measure two- way ANOVA and X2-test. The results of this study were as follows. First, the age-by-situation segmention basis and the education-by-situation segmention basis were useful for person-situation benefit segmentations of the female apparel market. Second, there were found three benefit segments (Youth/Fashion oriented users, Brand oriented users and Apathetic users of clothing) using age-by-situation segmention basis. Using education-by-situation segmention basis, five segments (Economic-value, Youth/Fashion, Brand/Self-expression Self-expression, and Apathetic users of clothing) were identified. And beifit segments classified by the age-by-situation segmention and education-by-situation segmention approach were accessible. Third, the pratical applicability of person-situation befeift segmentations of the female apparel market by a prior segmentation method were suggested.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.119-119
• /
• 2015

Ion beam sputtering has been widely used in Secondary Ion Mass Spectrometry (SIMS), X-ray Photoelectron Spectroscopy (XPS), and Auger Electron Spectroscopy (AES) for depth profile or surface cleaning. However, mainly due to severe matrix effects such as surface composition change from its original composition and damage of the surface generated by ion beam bombardment, conventional sputtering skills using mono-atomic primary ions with energy ranging from a few hundred to a thousand volts are not sufficient for the practical surface analysis of next-generation organic/inorganic device materials characterization. Therefore, minimization of the surface matrix effects caused by the ion beam sputtering is one of the key factors in surface analysis. In this work, the electronic structure of a $Ta_2O_5$ thin film on $SiO_2/Si$ (100) after Ar Gas Cluster Ion Beam (GCIB) sputtering was investigated using X-ray photoemission spectroscopy and compared with those obtained via mono-atomic Ar ion beam sputtering. The Ar ion sputtering had a great deal of influence on the electronic structure of the oxide thin film. Ar GCIB sputtering without sample rotation also affected the electronic structure of the oxide thin film. However, Ar GCIB sputtering during sample rotation did not exhibit any significant transition of the electronic structure of the $Ta_2O_5$ thin films. Our results showed that Ar GCIB can be useful for potential applications of oxide materials with sample rotation.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.57-65
• /
• 2009

An efficient and high-fidelity design approach for wing-body shape optimization is presented. Depending on the size of design space and the number of design of variable, aerodynamic shape optimization process is carried out via different optimization strategies at each design stage. In the first stage, global optimization techniques are applied to planform design with a few geometric design variables. In the second stage, local optimization techniques are used for wing surface design with a lot of design variables to maintain a sufficient design space with a high DOF (Degree of Freedom) geometric change. For global optimization, Kriging method in conjunction with Genetic Algorithm (GA) is used. Asearching algorithm of EI (Expected Improvement) points is introduced to enhance the quality of global optimization for the wing-planform design. For local optimization, a discrete adjoint method is adopted. By the successive combination of global and local optimization techniques, drag minimization is performed for a multi-body aircraft configuration while maintaining the baseline lift and the wing weight at the same time. Through the design process, performances of the test models are remarkably improved in comparison with the single stage design approach. The performance of the proposed design framework including wing planform design variables can be efficiently evaluated by the drag decomposition method, which can examine the improvement of various drag components, such as induced drag, wave drag, viscous drag and profile drag.

• Tribology and Lubricants
• /
• v.32 no.2
• /
• pp.61-66
• /
• 2016

Total thickness variation (TTV), BOW, and surface roughness are essential characteristics for high quality sapphire substrates. Many researchers have attempted to increase removal rate by controlling the key process parameters like pressure and velocity owing to the high cost of consumables in sapphire chemical mechanical polishing (CMP). In case of the pressure approach, increased pressure owing to higher deviation of pressure over the wafer leads to significant degradation of the TTV. In this study, the authors focused on reducing TTV under the high-pressure conditions. When the production equipment polishes multiple wafers attached on a carrier, higher loads seem to be concentrated around the leading edge of the head; this occurs because of frictional force generated by the combination of table rotation and the height of the gimbal of the polishing head. We believe the skewed pressure distribution during polishing to be the main reason of within-wafer non-uniformity (WIWNU). The insertion of a hub ring between the polishing head and substrate carrier helped reduce the pressure deviation. Adjusting the location of the hub ring enables tuning of the pressure distribution. The results indicated that the position of the hub ring strongly affected the removal profile, which confirmed that the position of the hub ring changes the pressure distribution. Furthermore, we analyzed the deformation of the head via finite element method (FEM) to verify the pressure non-uniformity over the contact area Based on experiment and FEM results, we determined the optimal position of hub ring for achieving uniform polishing of the substrate.

• Journal of Nutrition and Health
• /
• v.37 no.4
• /
• pp.266-272
• /
• 2004

This study investigated the effects of soyoligosaccharide consumption on lipid profile of plasma, liver and feces and immune responses in Sprague-Dawley male rats. Sixty male Sprague-Dawley rats 4-wk-old were provided the soyo-ligosaccharide containing diets for 4 weeks (0, 100 g/kg diet); each of these diets was supplemented with either 70 or 200 g fat/kg diet, giving a total of 4 experimental groups. The effect of weight reduction was most significantly observed in the group fed low fat and soyoligosacchairde diet. The plasma total lipid and cholesterol contents were not changed by either fat proportion or soyoligosaccharide supplementation in the diets. Also the plasma triglyceride lowering effect by soyoligosaccharide was not observed in rats fed either low fat or high fat diet. However, the significant decrease in TG contents was found with rats fed high fat diets compared to the control/no soyoligosaccharide diet. Elevation of plasma LDL-cholesterol and reduction of HDL-cholesterol by feeding high fat diet was not altered by supplementing soyoligosaccharide. This was also applied to the liver lipid profiles. The significant increases in liver total lipid, trigly-cerides and cholesterol by high fat diet was not abolished by feeding soyoligosaccharide. However, the desirable effects of feeding soyoligosaccharide were found with total lipid and cholesterol excretion through feces in rats fed high fat diets. Immune organ weights and spleen cell proliferations did not affected by experimental diets. These results de-monstrated that soyoligosaccharide intakes increased the lipid output via feces, especially in rats fed the high fat diet, but more researches are needed on immune responses.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.259-265
• /
• 2001

Staphylococal infection still remains to be one of the most serious infections, having various complications in the clinical use of indwelling polymeric medical devices. However, there are a few promising systems showing a high antibacterial effect without causing any demage of polymer backbone under biological environments such as blood or body fluid. In order to resolve this problem, we have designed a new antibiotic releasing system via a hydrolysis mechanism. The surface of biomedical polyurethane (PU) was modified by using 1,6-diisocyanatohexane (HMDI) to immobilize the rifampicon. Also, the immobilized rifampicin was designed to be released by a selective cleavage of the unstable carbamate linkage that exists on the rifampicin-immobilized polyurethane (PHR). The immobilization of rifampicin on the surface of polyurethane was confirmed by the disappearance of the characteristics IR absorbance peak of the isocyanate (-NCO) group at $2,267\;cm^{-1}$. The PHR showed a continuous rifampicin release profile under an aqueous environment of 10 mM of PBS (phosphate-buffered saline) for ove 6 days. The rifampicin molecules, which are released from PHR under an optimal bacterial infection environment, had a higher antibacterial activity against both S. aureus and S. epidermidis than rifampicin-incorporated polyurethane (RIP). In addition, the PHR maintained a stable antibacterial effect under a blood-mimic aqueous environment such as bovine calf serum.