• 제목/요약/키워드: vertical wind component

검색결과 32건 처리시간 0.031초

Deriving vertical velocity in tornadic wind field from radar-measured data and improving tornado simulation by including vertical velocity at velocity inlet

  • Yi Zhao;Guirong Yan;Ruoqiang Feng;Zhongdong Duan;Houjun Kang
    • Wind and Structures
    • /
    • 제38권4호
    • /
    • pp.245-259
    • /
    • 2024
  • In a tornadic wind field, the vertical velocity component in certain regions of tornadoes can be significant, forming one of the major differences between tornadic wind fields and synoptic straight-line wind fields. To better understand the wind characteristics of tornadoes and properly estimate the action of tornadoes on civil structures, it is important to ensure that all the attributes of tornadoes are captured. Although Doppler radars have been used to measure tornadic wind fields, they can only directly provide information on quasi-horizontal velocity. Therefore, lots of numerical simulations and experimental tests in previous research ignored the vertical velocity at the boundary. However, the influence of vertical velocity in tornadic wind fields is not evaluated. To address this research gap, this study is to use an approach to derive the vertical velocity component based on the horizontal velocities extracted from the radar-measured data by mass continuity. This approach will be illustrated by using the radar-measured data of Spencer Tornado as an example. The vertical velocity component is included in the initial inflow condition in the CFD simulation to assess the influence of including vertical velocity in the initial inflow condition on the entire tornadic wind field.

WISE 펄스 도플러 윈드라이다 품질관리 알고리즘 개발 (Development of a Quality Check Algorithm for the WISE Pulsed Doppler Wind Lidar)

  • 박문수;최민혁
    • 대기
    • /
    • 제26권3호
    • /
    • pp.461-471
    • /
    • 2016
  • A quality check algorithm for the Weather Information Service Engine pulsed Doppler wind lidar is developed from a view point of spatial and temporal consistencies of observed wind speed. Threshold values for quality check are determined by statistical analysis on the standard deviation of 3-component of wind speed obtained by a wind lidar, and the vertical gradient of horizontal wind speed obtained by a radiosonde system. The algorithm includes carrier-to-noise ratio (CNR) check, data availability check, and vertical gradient of horizontal wind speed check. That is, data sets whose CNR is less than -29 dB, data availability is less than 90%, or vertical gradient of horizontal wind speed is less than $-0.028s^{-1}$ or larger than $0.032s^{-1}$ are classified as 'doubtful', and flagged. The developed quality check algorithm is applied to data obtained at Bucheon station for the period from 1 to 30 September 2015. It is found that the number of 'doubtful' data shows maxima around 2000 m high, but the ratio of 'doubtful' to height-total data increases with increasing height due to atmospheric boundary height, cloud, or rainfall, etc. It is also found that the quality check by data availability is more effective than those by carrier to noise ratio or vertical gradient of horizontal wind speed to remove an erroneous noise data.

Assessment of vertical wind loads on lattice framework with application to thunderstorm winds

  • Mara, T.G.;Galsworthy, J.K.;Savory, E.
    • Wind and Structures
    • /
    • 제13권5호
    • /
    • pp.413-431
    • /
    • 2010
  • The focus of this article is on the assessment of vertical wind vector components and their aerodynamic impact on lattice framework, specifically two distinct sections of a guyed transmission tower. Thunderstorm winds, notably very localized events such as convective downdrafts (including downbursts) and tornadoes, result in a different load on a tower's structural system in terms of magnitude and spatial distribution when compared to horizontal synoptic winds. Findings of previous model-scale experiments are outlined and their results considered for the development of a testing rig that allows for rotation about multiple body axes through a series of wind tunnel tests. Experimental results for the wind loads on two unique experimental models are presented and the difference in behaviour discussed. For a model cross arm with a solidity ratio of approximately 30%, the drag load was increased by 14% when at a pitch angle of $20^{\circ}$. Although the effects of rotation about the vertical body axis, or the traditional 'angle of attack', are recognized by design codes as being significant, provisions for vertical winds are absent from each set of wind loading specifications examined. The inclusion of a factor to relate winds with a vertical component to the horizontal speed is evaluated as a vertical wind factor applicable to load calculations. Member complexity and asymmetric geometry often complicate the use of lattice wind loading provisions, which is a challenge that extends to future studies and codification. Nevertheless, the present work is intended to establish a basis for such studies.

Nonlinear aerostatic stability analysis of Hutong cable-stayed rail-cum-road bridge

  • Xu, Man;Guo, Weiwei;Xia, He;Li, Kebing
    • Wind and Structures
    • /
    • 제23권6호
    • /
    • pp.485-503
    • /
    • 2016
  • To investigate the nonlinear aerostatic stability of the Hutong cable-stayed rail-cum-road bridge with ultra-kilometer main span, a FEM bridge model is established. The tri-component wind loads and geometric nonlinearity are taken into consideration and discussed for the influence of nonlinear parameters and factors on bridge resistant capacity of aerostatic instability. The results show that the effect of initial wind attack-angle is significant for the aerostatic stability analysis of the bridge. The geometric nonlinearities of the bridge are of considerable importance in the analysis, especially the effect of cable sag. The instable mechanism of the Hutong Bridge with a steel truss girder is the spatial combination of vertical bending and torsion with large lateral bending displacement. The design wind velocity is much lower than the static instability wind velocity, and the structural aerostatic resistance capacity can meet the requirement.

Topographic effects on tornado-like vortex

  • Nasir, Zoheb;Bitsuamlak, Girma T.
    • Wind and Structures
    • /
    • 제27권2호
    • /
    • pp.123-136
    • /
    • 2018
  • The effects of steep and shallow hills on a stationary tornado-like vortex with a swirl ratio of 0.4 are simulated and quantified as Fractional Speed Up Ratios (FSUR) at three different locations of the vortex with respect to the crests of the hills. Steady state Reynolds Averaged Naiver Stokes (RANS) equations closed using Reynolds Stress Turbulence model are used to simulate stationary tornadoes. The tornado wind field obtained from the numerical simulations is first validated with previous experimental and numerical studies by comparing radial and tangential velocities, and ground static pressure. A modified fractional speed-up ratio (FSUR) evaluation technique, appropriate to the complexity of the tornadic flow, is then developed. The effects of the hill on the radial, tangential and vertical flow components are assessed. It is observed that the effect of the hill on the radial and vertical component of the flow is more pronounced, compared to the tangential component. Besides, the presence of the hill is also seen to relocate the center of tornadic flow. New FSUR values are produced for shallow and steep hills.

수평축 풍력터빈의 공력 하중 비교 (II): 수직 전단흐름 효과의 유·무 (Comparison of Aerodynamic Loads for Horizontal Axis Wind Turbine (II): with and without Vertical Wind Shear Effect)

  • 김진;강승희;유기완
    • 한국항공우주학회지
    • /
    • 제44권5호
    • /
    • pp.399-406
    • /
    • 2016
  • 대형 풍력터빈은 지상 전단 흐름 내에서 회전하면서 주기적인 유입속도의 변동 조건 하에 운용된다. 수직 전단흐름에 의해서 경계층 내의 유입 속도는 최고점에서 속도가 최대가 되고 최저점에서 속도가 최소가 된다. 이러한 공간적인 풍속 분포는 풍력터빈 로터의 허브와 저속회전축에서 6분력 하중에 대한 주기적인 진동을 야기한다. 본 연구에서는 수직 전단 흐름 효과를 무시한 균일 흐름장과 지상 전단 흐름효과를 고려한 두 가지 경우에 대한 공력 하중을 비교분석하였다. 계산 결과로부터 허브에서의 추력과 굽힘모멘트, LSS의 굽힘모멘트가 크게 변동하는 결과를 보여주었다. 따라서 지상 전단흐름 효과를 반영한 공력 해석이 피로 해석을 위해서 반드시 필요함을 확인하였다.

점모형을 이용한 조류와 취송류의 비선형 상호작용 (A Study on Nonlinear Interaction of Tidal Current and Wind-Induced Current using a Point Model)

  • 이종찬;정경태
    • 한국해안해양공학회지
    • /
    • 제8권1호
    • /
    • pp.28-36
    • /
    • 1996
  • 조류와 취송류의 비선형 상호작용에 대한 연직확산계수의 영향을 점모형을 이용하여 살펴보았다. q$^2$-q$^2$1 난류모형을 난류운동에너지의 생성과 감쇄가 균형을 이룬다는 가정 하에 단순화한 0-방정식 난류모형을 도입하고 마찰수심의 영향을 적절히 반영하도록 수정하여 연직확산계수를 산정하였다. 0-방정식 난류모형의 유도과정과 전향력 항이 포함됨으로써 공진이 발생될 수 있음을 제시하였다. 왕복성 수면경사력과 바람응력이 복합된 경우, 고려된 바람응력에 의한 조류 진폭의 변화는 무시할만한 크기였으나, 왕복성 수면경사력만에 의해서는 발생되지 않았던 2배조의 조류 성분이 파생되었다. 취송류의 연직구조는 조류에 의한 배경난류가 지배적인지의 여부에 따라 상당한 차이를 보였다. 따라서 황해와 같이 강한 조류가 존재하는 해역의 취송순환을 파악함에 있어 조류에 의한 배경난류를 무시할 경우는 실제와는 상당히 다른 결과가 나타날 수 있다.

  • PDF

두 층 관측 기상인자의 주성분-다중회귀분석으로 도출되는 고농도 미세먼지의 부산-서울 지역차이 해석 (Interpretation and Comparison of High PM2.5 Characteristics in Seoul and Busan based on the PCA/MLR Statistics from Two Level Meteorological Observations)

  • 최다니엘;장임석;김철희
    • 대기
    • /
    • 제31권1호
    • /
    • pp.29-43
    • /
    • 2021
  • In this study, two-step statistical approach including Principal Component Analysis (PCA) and Multiple Linear Regression (MLR) was employed, and main meteorological factors explaining the high-PM2.5 episodes were identified in two regions: Seoul and Busan. We first performed PCA to isolate the Principal Component (PC) that is linear combination of the meteorological variables observed at two levels: surface and 850 hPa level. The employed variables at surface are: temperature (T2m), wind speed, sea level pressure, south-north and west-east wind component and those at 850 hPa upper level variables are: south-north (v850) and west-east (u850) wind component and vertical stability. Secondly we carried out MLR analysis and verified the relationships between PM2.5 daily mean concentration and meteorological PCs. Our two-step statistical approach revealed that in Seoul, dominant factors for influencing the high PM2.5 days are mainly composed of upper wind characteristics in winter including positive u850 and negative v850, indicating that continental (or Siberian) anticyclone had a strong influence. In Busan, however, the dominant factors in explanaining in high PM2.5 concentrations were associated with high T2m and negative u850 in summer. This is suggesting that marine anticyclone had a considerable effect on Busan's high PM2.5 with high temperature which is relevant to the vigorous photochemical secondary generation. Our results of both differences and similarities between two regions derived from only statistical approaches imply the high-PM2.5 episodes in Korea show their own unique characteristics and seasonality which are mostly explainable by two layer (surface and upper) mesoscale meteorological variables.

비래해충 발생기간 중국 발원지 바람 및 한반도 유입 궤적 분석 (Analysis of Upper- and Lower-level Wind and Trajectory in and from China During the P eriod of Occurrence of Migratory Insect Pests of South Korea)

  • 강정혁;이승재;백주열;최낙중
    • 한국농림기상학회지
    • /
    • 제25권4호
    • /
    • pp.415-426
    • /
    • 2023
  • 본 연구는 수치모델 바람 자료를 통해서, 중국 비래해충 발원지의 기압별 분포와 바람장미도를 확인하여 풍향과 풍속을 분석하였다. 사용한 수치모델은 Land-Atmosphere Modeling Package (LAMP) - WRF 자료이며, 시공간 해상도는 1시간 간격의 약 20 km 수평해상도 자료이다. 2021년도에 벼멸구와 애멸구가 동시에 관찰된 예찰일인 7월 16일을 대상으로 하였다. 예찰일을 포함하는 7월 8일부터 7월 17일까지 발원지와 우리나라에 850 hPa부터 925 hPa에 이르는 하층대기에 제트 기류가 발생하는지를 살펴보기 위하여 LAMP 바람의 동서, 남북, 연직 성분 자료를 이용하여 풍속을 분석하였다. 바람의 연직 분포결과 비래해충 발생 시기가 될 때 바람이 비래해충 유입에 유리하게 바뀌는 것이 확인되었다. 바람장미도의 분석 결과, 우리나라와 가까운 지점에서 바람의 약 30% 이상이 제트 기류였고, 다섯 지점의 제트 기류의 풍향은 상층보다 하층에서 대부분 우리나라와 일본으로 향하고 있었으며, HYSPLIT의 역궤적 추적을 통해서도 하층 제트가 비래해충의 국내 유입에 영향을 준 것으로 분석이 되었다. 이 연구는 원하는 지점에서의 하층 제트의 풍속과 풍향을 비래해충 발생 시기와 비발생 시기를 비교 분석한 것으로, 국내로 유입되는 비래해충의 시기와 바람 통로에 대한 수평 및 연직적 연관 분석에 도움을 줄 것이다. 국내 144개 시군 농업기술센터에서 운영 중인 공중 포충망 설치 지역에 대한 검토와 평가에도 활용될 수 있을 것이다.

Wind velocity field during thunderstorms

  • Ponte, Jacinto Jr.;Riera, Jorge D.
    • Wind and Structures
    • /
    • 제10권3호
    • /
    • pp.287-300
    • /
    • 2007
  • Wind action is a factor of fundamental importance in the structural design of light or slender constructions. Codes for structural design usually assume that the incident mean wind velocity is parallel to the ground, which constitutes a valid simplification for frequent winds caused by meteorological phenomena such as Extratropical Storms (EPS) or Tropical Storms. Wind effects due to other phenomena, such as thunderstorms, and its combination with EPS winds in so-called squall lines, are simply neglected. In this paper a model that describes the three-dimensional wind velocity field originated from a downburst in a thunderstorm (TS) is proposed. The model is based on a semi empirical representation of an axially-symmetrical flow line pattern that describes a stationary field, modulated by a function that accounts for the evolution of the wind velocity with time. The model allows the generation of a spatially and temporally variable velocity field, which also includes a fluctuating component of the velocity. All parameters employed in the model are related to meteorological variables, which are susceptible of statistical assessment. A background wind is also considered, in order to account for the translational velocity of the thunderstorm, normally due to local wind conditions. When the translation of the TS is caused by an EPS, a squall line is produced, causing the highest wind velocities associated with TS events. The resulting vertical velocity profiles were also studied and compared with existing models, such as the profiles proposed by Vicroy, et al. (1992) and Wood and Kwok (1998). The present model predicts horizontal velocity profiles that depend on the distance to the storm center, effect not considered by previous models, although the various proposals are globally compatible. The model can be applied in any region of interest, once the relevant meteorological variables are known, to simulate the excitation due to TS winds in the design of transmission lines, long-span crossings, cable-stayed bridges, towers or similar structures.