• 한국구조물진단유지관리공학회 논문집
• /
• 제3권3호
• /
• pp.253-260
• /
• 1999

Main objective of this study is to examine the hysteretic behaviors and to evaluate the capacity of precast concrete (PC) large panel structures simulated from the prototype of 15-story building, Two 1/2 scaled precast concrete wall specimens and one monolithic reinforced concrete specimen were designed and tested under the cyclic loading conditions. The main parameter of test specimens in PC large panel structure is the type of details for vertical continuity of vertical steel in horizontal joint. Also the behaviors of PC large panel structures are compared with that of monolithic reinforcement concrete wall structure. From the results, the stiffness and energy dissipation ratio of the precast concrete specimens are shown little bit lower than those of monolithic reinforced concrete specimen. In the PC large panel structures, the specimen connected vertically by welding (strong connection) showed higher strength than that of the specimen connected vertically by joint box. However the failure pattern of the former showed more brittle than that of the latter due to the diagonal compressive failure of wall panels.

• Steel and Composite Structures
• /
• 제33권2호
• /
• pp.209-224
• /
• 2019

This paper describes a study of the mapping relationship between the vertical deformation of bridge structures and rail deformation of high-speed railway, taking the interlayer interactions of the bridge subgrade CRTS II ballastless slab track system (HSRBST) into account. The differential equations and natural boundary conditions of the mapping relationship between the vertical deformation of bridge structures and rail deformation were deduced according to the principle of stationary potential energy. Then an analytical model for such relationship was proposed. Both the analytical method proposed in this paper and the finite element numerical method were used to calculate the rail deformations under three typical deformations of bridge structures and the evolution of rail geometry under these circumstances was analyzed. It was shown that numerical and analytical calculation results are well agreed with each other, demonstrating the effectiveness of the analytical model proposed in this paper. The mapping coefficient between bridge structure deformation and rail deformation showed a nonlinear increase with increasing amplitude of the bridge structure deformation. The rail deformation showed an obvious "following feature"; with the increase of bridge span and fastener stiffness, the curve of rail deformation became gentler, the track irregularity wavelength became longer, and the performance of the rail at following the bridge structure deformation was stronger.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.247-254
• /
• 2000

In this study, the reinforcing effect of micropile for weathered rock is analysed by laboratory model tests. Especially, the effect of the number, the surface roughness, and length of micropile are focused. The results of tests are as follows: $\circled1$ The deformation modulus of reinforced ground is less than equivalent deformation modulus, and $\circled2$ Increasing effect of unconfined compressive strength is not large as times as increasing the number of micropile.

• 연구논문집
• /
• 통권27호
• /
• pp.35-45
• /
• 1997

The dynamic design process for the articulated bogie of light rail vehicle(LRV) was studied to design a primary and secondary suspension elements. Suspension stiffness and damping is selected on the basis of the ride quality and suspension stroke trade-off. LRV was modeled as a 2 d.o.f linear system for the design of vertical suspension characteristics and a 4 d.o.f linear system for the design of lateral suspension characteristics. FRA's class-4-track irregularity was used for the exciting disturbance on track. The optimum value of primary and secondary suspension characteristics was determined using this design process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.584-589
• /
• 2001

The latch needle cam system of circular knitting machines is analysed using multibody dynamics. A formulation is made to obtain the vertical stiffness between the needle and the cam. By implementing this formulation into data of the multibody dynamics program, the motion and the force between the needle and the cam are obtained.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.680-685
• /
• 2005

An active application of concrete track is being expected for the future constructions of Korean railroad. For the successful concrete track construction in earthwork areas, proper reinforced subgrades, which effectively distribute train loads to subground, should be installed. In this paper, behaviors of concrete track on the reinforced subgrade with the standard stiffness and depth were investigated through numerical analyses. The appropriateness of the reinforced subgade was evaluated by analyzing the distributions of the settlements and vertical stress beneath the concrete slab.

• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.105-115
• /
• 2008

온도 및 수분 등과 같은 환경적인 요인들은 슬래브의 컬링을 유발하여 줄눈 콘크리트 포장의 장기적인 거동과 공용성에 영향을 미치는 것으로 알려져 있다. 하지만, 콘크리트 슬래브의 컬링에 관한 상세한 조사가 부족한 실정이므로 컬링과 이에 미치는 요인들의 관계는 아직까지도 명확하게 정의되지 못하고 있다. 본 연구에서는 현장에 건설된 줄눈 콘크리트포장의한 슬래브에 각종 계측기를 매설하여 콘크리트 슬래브의 온도, 상대습도, 변형률, 연직변위, 그리고 슬래브 좌우측 줄눈부의 수평방향 움직임을 조사하였다. 콘크리트 타설 직후부터 약 4일간 측정된 현장자료를 분석하여 초기 재령 콘크리트 슬래브의 컬링에 미치는 온도 및 수분의 영향과 줄눈강성의 크기에 따라 컬링이 구속되는 정도를 조사하였다. 콘크리트 슬래브의 컬링은 주로 온도의 영향 때문에 24시간주기의 사이클을 나타내었으며. 장기적인 건조수축의 영향으로 상향의 컬링이 점차 증가하는 경향을 보였다. 또한, 컬링의 크기와 변화량이 골재 맞물림 등에 기인하는 줄눈강성에 영향을 크게 받는 것으로 조사되었다. 향후 온도에 의 한 계절별 줄눈강성의 변화와 장기적인 건조수축이 콘크리트 슬래브의 컬링에 미치는 영향을 추가로 조사할 예정이다.

• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.526-534
• /
• 2011

본 연구에서는 고속철도의 자갈궤도와 콘크리트궤도에서 열차 주행 안전 측면에서 관리해야 할 레일패드 강성의 상한값을 차량 및 궤도의 동특성과 운영환경을 고려하여 결정하는 방법을 제시하였다. 차량-궤도의 상호작용해석의 중요 입력 파라메타인 궤도틀림과 관련하여 프랑스 및 독일에서 제시한 고저틀림 PSD(파워 스펙트럼 밀도)와 경부고속철도 1단계 구간 자갈궤도 및 콘크리트궤도에서 계측한 고저틀림 자료를 통하여 얻은 PSD를 기초로 하여 넓은 범위의 주파수 영역에서 적용할 수 있는 자갈궤도와 콘크리트궤도의 고저틀림 PSD를 제시하였다. 제시된 PSD 기준 모델을 사용하여 시간 영역에서의 고저틀림 입력을 난수 생성(random number generation)을 통하여 구한 후 차량-궤도 상호작용 해석기법을 사용하여 레일패드 강성에 따른 윤중 감소율을 산정하였다. 산정된 윤중 감소율에 대하여 국내 철도차량 안전기준에 관한 규칙의 탈선계수 규정을 적용하여 주행 안전 측면에서 허용할 수 있는 레일패드 강성의 상한값을 제시하였다.

• Asian Spine Journal
• /
• 제12권6호
• /
• pp.967-972
• /
• 2018

Study Design: Biomechanical study. Purpose: To investigate the relative stiffness of a new posterior pelvic fixation for unstable vertical fractures of the sacrum. Overview of Literature: The reported operative fixation techniques for vertical sacral fractures include iliosacral screw, sacral bar fixations, transiliac plating, and local plate osteosynthesis. Clinical as well as biomechanical studies have demonstrated that these conventional techniques are insufficient to stabilize the vertically unstable sacral fractures. Methods: To simulate a vertically unstable fractured sacrum, 12 synthetic pelvic models were prepared. In each model, a 5-mm gap was created through the left transforaminal zone (Denis zone II). The pubic symphysis was completely separated and then stabilized using a 3.5-mm reconstruction plate. Four each of the unstable pelvic models were then fixed with two iliosacral screws, a tension band plate, or a transiliac fixation plus one iliosacral screw. The left hemipelvis of these specimens was docked to a rigid base plate and loaded on an S1 endplate by using the Zwick Roell z010 material testing machine. Then, the vertical displacement and coronal tilt of the right hemipelves and the applied force were measured. Results: The transiliac fixation plus one iliosacral screw constructions could withstand a force at 5 mm of vertical displacement greater than the two iliosacral screw constructions (p=0.012) and the tension band plate constructions (p=0.003). The tension band plate constructions could withstand a force at $5^{\circ}$ of coronal tilt less than the two iliosacral screw constructions (p=0.027) and the transiliac fixation plus one iliosacral screw constructions (p=0.049). Conclusions: This study proposes the use of transiliac fixation in addition to an iliosacral screw to stabilize vertically unstable sacral fractures. Our biomechanical data demonstrated the superiority of adding transiliac fixation to withstand vertical displacement forces.