• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.41-47
• /
• 2014

Experimental results are given for the vertical motion of water in the water chambers for wave energy converter aligned along the wave propagation direction in order to avoid the impulsive wave forces. This paper mainly focuses on the property of the amplitude of the vertical motion of the water surface in the chambers. The amplification has been investigated by dimensionless parameters of wave period to resonance period ratio of the U-shaped oscillation, $T/T_r$, chamber size to wave length ratio, l/L, water depth to wave length ratio, h/L, amplitude of up-down motion of water particles to draft of the front wall ratio, ${\zeta}/D$. It has been shown that l/L should be less than 0.1 and as $T/T_r$ approaches unity the up-down of the water in the chambers is amplified. Also, the structure of the walls which form th water chambers has been examined roughly. It is deduced that the chambers set on both sides of the hull of a single-point moored floating vessel is preferable to those set along a fixed structure such as breakwaters.

• 한국항공우주학회지
• /
• 제44권5호
• /
• pp.399-406
• /
• 2016

대형 풍력터빈은 지상 전단 흐름 내에서 회전하면서 주기적인 유입속도의 변동 조건 하에 운용된다. 수직 전단흐름에 의해서 경계층 내의 유입 속도는 최고점에서 속도가 최대가 되고 최저점에서 속도가 최소가 된다. 이러한 공간적인 풍속 분포는 풍력터빈 로터의 허브와 저속회전축에서 6분력 하중에 대한 주기적인 진동을 야기한다. 본 연구에서는 수직 전단 흐름 효과를 무시한 균일 흐름장과 지상 전단 흐름효과를 고려한 두 가지 경우에 대한 공력 하중을 비교분석하였다. 계산 결과로부터 허브에서의 추력과 굽힘모멘트, LSS의 굽힘모멘트가 크게 변동하는 결과를 보여주었다. 따라서 지상 전단흐름 효과를 반영한 공력 해석이 피로 해석을 위해서 반드시 필요함을 확인하였다.

• 대한기계학회논문집B
• /
• 제30권12호
• /
• pp.1155-1163
• /
• 2006

Calculation was carried out for phase velocity and deformation wave decay in a layer of viscoelastic material fixed tightly on the solid substrate. Analysis has been performed regarding the inner structure of the wave, i.e., the proportions between the vertical and horizontal displacements and their profiles. The wave characteristics depend strongly on media compressibility factor. The effect of viscous losses on parameters of the main oscillation mode was studied in detail. Results were compared with the model of coating with local deformation. A new experimental approach was made in order to measure such wave properties of a compliant coating as the dependency of deformation wave velocity on frequency and decay factor was made. The method for estimation of coating parameters enabling the drag reduction in turbulent flow was then refined.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.77-80
• /
• 2002

In this paper, InP-based HBTs have been optimally designed by numerical simulation and fabricated by the self-aligned process. The structure of HBT was designed in terms of the current gain*f$_{max}$ for the base and f$_{T}$*f$_{max}$ for the collector. The designed structure produced the current gain of about 50 and the cutoff frequency and the maximum oscillation frequency of 87GHz and 2940Hz respectively. In addition, we present a study of the vertical and lateral etching of InP with the mask sides parallel to the principal crystallographic axes, [0101 and (001). This etching characteristics arc used to fabricate self-aligned HBT structures with reduced parasitic effects.s.s.s.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.112-116
• /
• 2017

Present study investigated the influence of time step size, turbulent eddy viscosity, and the number of layer on rapid and unsteady propagation of dam break flow. When the time step size had a value such that it resulted in Cr of 0.89, a significant numerical oscillation was observed in the vicinity of the wave front. Higher turbulent viscosity ensured smooth and mild slope of velocity and water stage compared with the flow behavior by no viscosity. The vertical velocity at the lower layer positioned near the bottom showed lower velocity compared with other layers.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.380-388
• /
• 1994

Study on the chaotic stirring has been performed numerically and experimentally for a shallow rectangular tank accompanying a vortex shedding. The model is composed of a rectangular tank with a vertical plate with a length half the width of the tank. The tank is subject to a horizontal sinusoidal oscillation. The chaotic stirring was analysed by Poincare sections, unstable manifolds and Lyapunov exponents. As Reynolds number is increased the stirring effect is decreased due to the growth of a regular regions near the lower surface of the tank. In the other hand decrease of Reynolds number gives a weaker vortex shedding resulting in the poorer stirring effect. It was also found that the Lyapunov exponent is the highest at the dimensionless period of 1.3-1.5, which seems to be the best condition for the efficient stirring. The experimental visualization for the deformation of materials exhibits the striation pattern similar to the unstable manifold obtained numerically.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.114-123
• /
• 1993

In is well known that a cyclic Karman vortex street is thrown out periodically from cylinder whose axis is vertical to the bulk flow. When the cylinder is vibrating in the frequency close to that of Karman vortex street, the vortex shedding frequency is locked onto that of cylinder. While there are many experimental studies for this phenomenon compared with analytical studies by numerical calculation, are very limited. In this study, a new algorithm for moving boundary is proposed and a simulator is develoed, which can deal with this phenomenon with experimental studies.

• 대한조선학회지
• /
• 제18권4호
• /
• pp.13-20
• /
• 1981

The hydrodynamic added mass of two dimensional cylinders oscillating vertically at high frequencies in the free surface is of interest to ship vibration problems. Conformal transformation is one of the methods commonly in use for computing the inertia coefficient. Especially, Schwarz-Christoffel transformation has been employed to evaluate the inertia coefficient for the cylinders of straight frames and chines. In this paper, the inertia coefficient for the cylinders with round corners in vertical oscillation at high frequencies are evaluated by employing the Schwarz-Christoffel transformation for the concave corner. The results of calculation by employing the Schwarz-Christoffel transformation are found to be well within the expected range of values compared to Lewis form and the results obtained by source distribution method.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.233-236
• /
• 2008

To analyze the saline intrusion in the place, such as an estuary, the three-dimensional numerical model is developed. In this study, the advection terms of the governing equations are discretized by upwind scheme. By using an explicit scheme for the longitudinal direction and an implicit scheme for the vertical direction, the numerical model is free from the restriction of temporal step size caused by a relatively small grid ratio. The equation of state is used to consider the density, and the scalar transport equation for salinity is employed the third order TVD to scheme to prevent unphysical oscillation near discontinuity. In order to verify saline intrusion, the numerical model is conducted to compare the previous model in the lock exchange. The present model generally show a good agreement with the previous one.

• 한국재료학회지
• /
• 제6권11호
• /
• pp.1067-1073
• /
• 1996

본 연구에서는 직접 제작된 전도유체(electrorheological fluid)용 수직진동 rhemeter 기기상의 구조 해석 및 실험을 실시하였다. 수직진동 rheomether는 간단하게 제작이 가능하고, 고전압 발생장치를 연결하므로 전동유체의 점탄성 특성을 비교적 쉽게 측정할 수 있다. Rheometer의 구조적 변수와 측정된 힘, 변형 등을 이용하여 복소 점도(complex viscosity), 복소 전단 변형률(complex shear modulus), loss tangent 등의 선형 점탄성 물질 함수를 직접 계산할 수 있으며, corn starch를 polybutene/kerosene에 분산시킨 전동유체를 이용하여 전기장하의 점탄성을 측정하였다.