• 수산해양기술연구
• /
• 제43권4호
• /
• pp.355-361
• /
• 2007

A giant jellyfish (Nemopilema nomurai), which is presumed developing in the East China Sea, is recently one of major issues in the Northeast Asia region due to its fatal damage to the fishery. The biomass estimates have generally been conducted by trawl sampling and sighting survey methods. The biological research is also needed to clarify such environmental origin or diurnal migration patterns. While trawl sampling or sighting survey methods are effective to investigate its density estimates in its distributed community of near bottom or surface, they have a problem in investigation on the vertical distribution of jellyfishes. In this case, an echo sounding detection would have an advantage to survey it more extensively and effectively. This trial was conducted to observe the vertical distribution of giant jellyfish, where thermocline strongly formed, during mooring at each station of the East China Sea and southern coastal area using acoustical and optical methods. By the results, they were observed to exit and move at the water column under the thermocline using the optical camera and echo sounder system, and the information was analyzed to find out the acoustical sound scattering characteristics relatives to 120kHz frequency. These results can be utilized effectively to estimate the vertical distribution and biomass of Giant jellyfish with comparing results from trawl sampling and sighting survey methods, hereafter.

• 한국해안·해양공학회논문집
• /
• 제21권4호
• /
• pp.290-300
• /
• 2009

연직 막체방파제에 대한 기존의 수치해석에서는 막체의 운동 중 발생하는 변동장력성분이 초기장력에 비하여 미미하다는 가정 하에 운동 중의 막체 장력을 초기장력으로 대체하는 선형해석을 수행하였다. 본 수치해 석에서는 막체장력의 비선형 변화를 한 주기 동안의 평균장력으로 대체하며 이 평균장력을 반복계산을 통하여 구해나가는 준 비선형 해석을 수행하였다. 상기 선형해석 결과와 비교하여 입사파 주기가 증가할수록 반사율은 증가하며 전달율은 감소하는 것으로 나타났다. 아울러, 본 준 비선형해석을 계류형태를 달리하는 두 구조물에 적용한 결과, 막체의 수평변위의 제어가 방파성능에 밀접한 효과가 있는 것으로 나타났다. 막체의 수평변위를 억제하기 위해서는 막체의 초기장력을 증가시키거나 막체의 중간부에 계류라인을 추가 결속시키는 방법들이 있으나 이를 위해서는 연직 하향 계류력을 지지하기 위한 대형 수면 부표의 설치가 요구된다.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.35-45
• /
• 2000

The slipway, which is one of stern construction, is necessary for stern trawler to let fishing implements, such as fishing net, otter board and warp, go out effectively. It may be doubtable whether there is any possibility for deckwetness to occur because the slipway is obliquely in contact with sea surface. The author discusses any possibility for deckwetness through slipway of stern trawler in wind and waves. A 350 G/T class, ocean-going stern trawler is adopted for the present study. The stem trawler is particularly assumed to drift with fishing implements hung down the slipway due to internal or external accident during fishing operation in real sea. The author considers two factors as possibility for deckwetness to occur through slipway. One is mooring effect of fishing implements hung down the slipway under wind pressure, and the other is relative ship motion in vertical direction in waves. Through the numerical calculation, the author clarifies that there is thin possibility for deckwetness to occur from above two points of view.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.1-6
• /
• 2008

Anchors have been commonly used to as foundation systems of the structures that require the uplift resistance. Recently anchors have been used in ocean sediment for mooring systems to stabilizeoffshore structures. In the saturated clayey soil however suction developed between the soil and andchor and affects the uplift capacity of anchor. To estimate the uplift capacity of the andchor accurately, the failure mechanisms of the andchor by the uplift force should also be correctly assumed. The uplift capacity is usually expressed in terms of breakout factors with respect to embedment ratio. In this paper, a two-dimensional plane strain numerical investigation into the vertical uplift capacity of a plate andchor in a clayey soil is described. The breakout factor against their corresponding values of embedment ratio was calculated and plotted along a single curve. The modes of failure mechanism at shallow and deep andchors are also presented.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.185-191
• /
• 2003

A numerical study on the hydrodynamic properties of a floating flexible breakwater consisting of triple vertical porous membrane structures attached to a floating rigid pontoon restrained by moorings is carried out in the context of two-dimensional linear wave-flexible body interaction theory. The tensions in the triple membranes are achieved by hanging a clump weight from its lower ends. The clump weight is also restrained properly by moorings. The dynamic behavior of the breakwater was described through an appropriate Green function, and the fluid multi-domains are incorporated into the boundary integral equation. Numerical results are presented which illustrate the effects of the various wave and structural parameters on the efficiency of the breakwater as a barrier to wave action. It is found that the wave reflection and transmission properties of the structures depends strongly on the membrane length taking major fraction of water column, the magnitude of tensions on membrane achieving by the clump weight, proper mooring types and stiffness, the permeability on the membrane dissipating wave energy.

• 한국항만학회지
• /
• 제8권1호
• /
• pp.17-22
• /
• 1994

The wave interaction with flexible membrane such as PVC and fabrics is studied to prove its applicability to portable breakwaters. To obtain the wave exciting force acting on flexible membrane, eigen-function expansion method is employed. The effect of flexible is involved in body boundary condition in which x-directional displacement of membrane is obtained by solving the linear membrane equation. Displacement of membrane is assumed to be small compared to wavelength, therefore the tensile force of membrane remains constant. As the numerical examples, transmission and reflection coefficients according to the change of tensile forces are investigated. The hydrodynamic force on membrane, the dynamic tension in the mooring lines and the vertical displacement profile of membrane are also calculated. It is suggested that the flexible membrane can be used to engineering material for the future coastal/ocean applications.

• 한국전산구조공학회논문집
• /
• 제13권3호
• /
• pp.285-294
• /
• 2000

계류돌핀의 강관말뚝식 하부구조에 대한 실용적 설계최적화 과정을 제시하고, 수치 예를 통하여 유용성을 평가하였다. 유한차원 최적설계 문제의 정식화에서, 말뚝들을 몇 개의 그룹으로 구분하여 이들의 기하학적 위상과 단면의 치수를 설계변수로 활용하였다. 설계목적함수는 말뚝의 총 중량이며, 설계제약조건은 응력과 근입 깊이, 설계변수의 상한과 하한 등이다. 설계변수의 연계와 고정을 통해 몇 가지의 실용적 설계 대안을 검토하였다. 최적화 프로그램으로는, 순차2차계획법(SQP)을 사용하고 또 쉽게 얻을 수 있는 PLBA 및 IMSL 라이브러리의 DNCONF서브루틴을 이용하였다. 수치예제의 돌핀은 20개의 강관말뚝으로 하부구조를 형성하며, 이중 4개는 연직말뚝이고 16개는 경사말뚝이다. 다양한 대안 설계에서 성공적으로 최적해를 얻었으며, 실용적인 최적 설계과정 임을 확인할 수 있었다.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.65-73
• /
• 1997

본 연구는 부유식 파랑제어구조물의 계류방식을 말뚝계류식으로 하여 종래의 부유식 파랑제어구조물의 파랑제어기능을 보완하고, 친수성 구조물로 이용할 수 있는 다용도 구조물의 개발을 목표로 하고 있다. 본 연구에서는 부유체의 계류장치에 초기반력을 작용시킴으로써 발생하는 파랑제어 효과의 개선과 부유체의 동요제어 효과를 수치계산법을 통하여 논의하였다. 이 때 계류부에서 발생하는 비선형 마찰력을 선형모델화하는 이론을 전개한 다음 수치계산 및 실험값을 통하여 본 수치모델의 적용성에 관하여 논의한 결과 양호한 일치성을 보였다. 또한, 파랑제어 효과 및 부유체의 동요저감 효과를 동시에 만족할 수 있는 초기반력에 관하여 논의하였다.

• Ocean Systems Engineering
• /
• 제10권4호
• /
• pp.399-414
• /
• 2020

A floating bridge is an innovative solution for deep-water and long-distance crossing. This paper presents a curved floating bridge's dynamic behaviors under the wind, wave, and current loads. Since the present curved bridge need not have mooring lines, its deep-water application can be more straightforward than conventional straight floating bridges with mooring lines. We solve the coupled interaction among the bridge girders, pontoons, and columns in the time-domain and to consider various load combinations to evaluate each force's contribution to overall dynamic responses. Discrete pontoons are uniformly spaced, and the pontoon's hydrodynamic coefficients and excitation forces are computed in the frequency domain by using the potential-theory-based 3D diffraction/radiation program. In the successive time-domain simulation, the Cummins equation is used for solving the pontoon's dynamics, and the bridge girders and columns are modeled by the beam theory and finite element formulation. Then, all the components are fully coupled to solve the fully-coupled equation of motion. Subsequently, the wet natural frequencies for various bending modes are identified. Then, the time histories and spectra of the girder's dynamic responses are presented and systematically analyzed. The second-order difference-frequency wave force and slowly-varying wind force may significantly affect the girder's lateral responses through resonance if the bridge's lateral bending stiffness is not sufficient. On the other hand, the first-order wave-frequency forces play a crucial role in the vertical responses.

• 대한토목학회논문집
• /
• 제34권1호
• /
• pp.167-173
• /
• 2014

석션 매입 앵커(Embedded Suction Anchor; ESA)는 석션 기초(Suction Pile or Caisson)을 이용하여 앵커를 지중에 매설한 후 인발에 저항하는 계류앵커형식이다. 본 연구에서는 ALE (Arbitrary Larangan Eulerian) Adpative Meshing 기법을 이용한 수치해석을 통해 석션 매입 앵커의 인발 거동을 모사하고, 그 결과를 기존 연구에서 수행된 원심모형 실험 및 한계 평형법을 이용한 해석적 방법의 결과와 비교 분석 하였다. 이를 통해 앵커의 수평 연직 경사 방향의 인발 거동을 평가하였으며, 수치 해석 결과, 수평 재하 시 중간 위치에서 가장 큰 저항력을 발휘하는 것으로 나타났다. 연직 재하의 경우 재하 위치와 무관하게 유사한 저항력이 발휘 되었으며, 수평 저항력이 가장 큰 중간 위치에서 경사 하중을 가한 결과 경사각이 증가할수록 인발 저항력이 감소하는 것으로 나타났다.