• Smart Structures and Systems
• /
• 제17권3호
• /
• pp.363-389
• /
• 2016

Deficient modes that cannot be always identified from different sets of measurement data may exist in the application of operational modal analysis such as the stochastic subspace identification techniques in large-scale civil structures. Based on a recent work using the long-term ambient vibration measurements from an instrumented cable-stayed bridge under different wind excitation conditions, a benchmark problem is launched by taking the same bridge as a test bed to further intensify the exploration of mode identifiability. For systematically assessing this benchmark problem, a recently developed SSI algorithm based on an alternative stabilization diagram and a hierarchical sifting process is extended and applied in this research to investigate several sets of known and blind monitoring data. The evaluation of delicately selected cases clearly distinguishes the effect of traffic excitation on the identifiability of the targeted deficient mode from the effect of wind excitation. An additional upper limit for the vertical acceleration amplitude at deck, mainly induced by the passing traffic, is subsequently suggested to supplement the previously determined lower limit for the wind speed. Careful inspection on the shape vector of the deficient mode under different excitation conditions leads to the postulation that this mode is actually induced by the motion of the central tower. The analysis incorporating the tower measurements solidly verifies this postulation by yielding the prevailing components at the tower locations in the extended mode shape vector. Moreover, it is also confirmed that this mode can be stably identified under all the circumstances with the addition of tower measurements. An important lesson learned from this discovery is that the problem of mode identifiability usually comes from the lack of proper measurements at the right locations.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1931-1939
• /
• 2000

Operating excitation forces of the linear vibratory system are normally determined by direct measurement techniques using load cells, strain gauges, etc. But, hydraulic forces of the rotating turbomachinery such as centrifugal pumps are exerted on an impeller due to asymmety of the flow by the interaction between pump impeller and volute. So, investigations of wide range of hydraulic designs and geometric deviations are difficult by direct method. This paper presents a hybrid approach for fourier transformed operational excitation forces, which uses pseudo-inverse matrix of the transfer matrix for the system and the measured vibrational data with standard installed pump. The determination of the transfer function matrix is based on a linear rotor/stationary system and steady state harmonic response in finite element analysis. And, vibrational data is collected in both vertical and horizontal directions at inboard and outboard bearing housings. The results of the process may be enhanced by making acceleration measurements at many more locations than there are forces to be determined.

• Structural Engineering and Mechanics
• /
• 제78권4호
• /
• pp.425-437
• /
• 2021

Under foundation shock mats have been used in the current practice in order to reduce/damp vibrations received by buildings through the surrounding environment. Although some investigations have been made on under foundation shock mats performance, their effectiveness in the reduction of railway induced-vibrations has not been fully studied, particularly with the consideration of underneath soil media. In this regard, this research is aimed at investigating performance of shock mat used beneath building foundation for reduction of railway induced-vibrations, taking into account soil-structure interaction. For this purpose, a 2D finite/infinite element model of a building and its surrounding soil media was developed. It includes an elastic soil media, a railway embankment, a shock mat, and the building. The model results were validated using an analytical solution reported in the literature. The performance of shock mats was examined by an extensive parametric analysis on the soil type, bedding modulus of shock mat and dominant excitation frequency. The results obtained indicated that although the shock mat can substantially reduce the building vibrations, its performance is significantly influenced by its underneath soil media. The softer the soil, the lower the shock mat efficiency. Also, as the train excitation frequency increases, a better performance of shock-mats is observed. A simplified model/method was developed for prediction of shock mat effectiveness in reduction of railway-induced vibrations, making use of the results obtained.

• 소음진동
• /
• 제11권1호
• /
• pp.76-81
• /
• 2001

This paper addresses experimental results carried out to investigate the transmission of seat vibration to the head for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on transmissibility, five different postures and three different vibration excitation levels were considered. The applied acceleration and head accelerations of the seated subject were measured simultaneously by using a 6-axes bite-bar. Detailed experimental results of measured transmissibilities are illustrated for each posture and/or vibration excitation level, and they were compared to an International Standard. They are found to allow the identification of dynamic characteristics of Korean seated body for various reat vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride quality.

• 소음진동
• /
• 제6권4호
• /
• pp.439-446
• /
• 1996

This paper introduces a newly designed pendulum system that enables the more accurate boservation of dynamic behaviour arising from both horizontal and vertical(i.e. two dimension) excitation. First, experiments were carried out to examine the frequency responses of the devised pendulum system. Interestingly, experimental results for the three excitation angles of 22, 32 and 48 degree show 'new' jump phenomena. For the further understanding of these phenomena, experimental investigationhas been made to identify the equation of motion of the pendulum system from experimental data. This attempt has revealed that the viscous, coulomb and aerodynamic damping factors are involved in the equation of motion. By applying the Ritz averaging method to the equation, it becomes apparent that the jumping phenomena of the pendulum system in this work is more theoretically understood.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.138-143
• /
• 2000

This paper addresses experimental results carried out to investigate the transmission of seat vibration to the head for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on transmissibility, five different postures and three different vibration excitation levels were considered. The applied acceleration and head accelerations of the seated subject were measured simultaneously by using a 6-axes bite-bar. Detailed experimental results of measured transmissibilities are illustrated for each posture and/or vibration excitation level. They are found to allow the identification of dynamic characteristics of Korean seated body for various real vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride quality.

• 소음진동
• /
• 제10권6호
• /
• pp.1017-1021
• /
• 2000

This paper addresses experimental results carried out to investigate the characteristics of dynamic mass for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on dynamic mass, five different postures and three different vibration excitation levels were considered. The applied acceleration and transmitted force to the hip of the seated subject were measured simultaneously. Detailed experimental results of measured dynamic mass are illustrated for each posture and/or vibration excitation level. Maximum peaks of around 5 Hz were observed for most experimental cases. They are found to allow the identification of dynamic characteristics of Korean seated body for various real vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride duality.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.139-146
• /
• 1998

The prototype ASME III motor actuated Y-type globe valve has been tested to identify dynamic characteristics. The valve is Seismic Category I equipment and has the function to control water flow in the safety-related system. In this study, two different types of structural identification test i.e. swept sine and broadband random, have been performed at various levels of excitation to verify the effects of test method and excitation level on cross coupling effect as well as natural frequencies and damping values. It was found that swept sine test and broadband random test showed similar natural frequencies, and that the primary interaction was exhibited between horizontal and vertical axes.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.12-19
• /
• 1998

Response spectrum analysis method is widely used for seismic analysis of building structure. Analysis of structural vibration for equipment, machine and moving loads are executed by time history analysis. This method is very complex, difficult and tedious. In this study, maximum response of structure for this case are simply and fast. calculated by mode shape and response spectrum for excitation. At first, Response spectrum and time history analysis for some earthquake is carried and investigate the error of maximum displacement response for R. S. A. Secondly, The process for response spectrum analysis in excitation are calculated, and maximum model response are combined by CQC (Complete Quadratic Combination) methods. Finally, Combining maximum displacement response is compared with one of time history analysis.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.685-699
• /
• 2014

In this study, the dynamic responses of a riser under the combined excitation of internal waves and background currents are studied. A modified Taylor-Goldstein equation is used to calculate the internal waves vertical structures when background currents exist. By imposing rigid-lid boundary condition, the equation is solved by Thompson-Haskell method. Based on the principle of virtual work, a nonlinear differential equation for riser motions is established combined with the modified Morison formula. Using Newmark-${\beta}$ method, the motion equation is solved in time domain. It is observed that the internal waves without currents exhibit dominated effect on dynamic response of a riser in the first two modes. With the effects of the background currents, the motion displacements of the riser will increase significantly in both cases that wave goes along and against the currents. This phenomenon is most obviously observed at the motions in the first mode.